Manual

Selecting the video input source
to view
To select the video input source to x4ew:
1 Press _) on the remote control or TV control panel.
_) And then either:
a) Press 0-8; or
b) Repeatedly press • or • on the remote control
and then press _ to change the input; or
c) Repeatedly press _) on the remote control or
TV control panel to change the input.
Note:
• You can label the video input sources according to the
specific devices you have connected to the TV
(_,_ "Labeling video input sources" on page 29).
° Sources can also be skipped (_,_ "Setting video input
skip" on page 29).
° Inputs that are set to skip will be grayed out and will be
skipped over only when selecting inputs by repeatedly
pressing _).
° If one or more REGZA-LINK ® devices are connected to
an HDMI input, the REGZA-LINK ® icon will appear. In
this case, the label (_,_ page 29) will not appear in the
input selector.
To select a REGZA-LINK ®dex@e:
1 Press • or • to highlight an appropriate HDMI
input.
_) Press • to display the list of REGZA-LINK ®devices
f®r that input.
3 If there are multiple REGZA-LINK ® devices on the
input, use • or • to highlight a particular device.
4 Press _ to select the device and change inputs.
32
XV648UO9CO6. pdf 1 2009/07/t0 1t:25:46