Manual

Selecting the optical audio output
format
You can use this feature to select the optical audio
output format when you connect a Dolby Digital
decoder or other digital audio system to the DIGITAL
AUDIO OUT terminal on the TV.
1
2
3
4
Tune to a digital source on the ANT/CABLE input.
From the SETUP menu, highlight AV Connection
and press @.
Press • or • to select Digital Audio Output.
Press < or • to select Auto or PCM, and then press
EXIT
O.
Auto: this mode outputs Dolby Digital o1"PCM to
the digital audio output socket providing what is
being broadcast.
PCM: this mode outputs PCM format to the digital
audio output socket.
Usingthe Dolby® DigitalDynamic
RangeControlfeature
This dynamic range control feature causes the ATSC
dynamic range to be further compressed, allowing you
to switch from digital to analog broadcasts at the same
dynamic range.
1 FromtheSOUND menu, highlight Dynamic Range
Control.
2 Press < or • to select On, and then press _x_w
Note:
• This feature is only available on digital channels.
• This feature will also affect to the Digital Audio Output
when the optical audio output format is set to PCM
UsingDolby®Volume
This feature provides a consistent sound volume
regardless of programs, channels or input sources.
1 From the SOUND menu, highlight the Dolby
Volume.
2 Press < or • to select Low, High or Off.
Note:
• If Dynamic Range Control is set to On, this feature will
be grayed ouL
° This feature does not affect the audio signal output from
the DIGITAL AUDIO OUT and FIXED AUDIO terminals.
Setting the PIN code
A PIN code is necessary for some menus.
Registeringa newPINcode
1 From the PREFERENCES menu, highlight PIN
Setting and press @. A new screen will display.
2 Press the number buttons to enter a four-digit number.
Re-enter the PIN code to confirm it.
ChangingordeletingyourPINcode
2
From the PREFERENCES menu, highlight PIN
Setting and press @. The PIN code screen will
display.
Press the number buttons to enter your four-digit
PIN code.
•Change PIN
Highlight Change PIN and press @.
•Delete PIN
Highlight Delete PIN and press @.
If you delete the PIN code, the settings of Parental
Control and Locks are reset.
IfyoucannotrememberyourPINcode
While the PIN code entering screen is displayed, press
RE_LLfour times within five seconds. The PIN code ;viii
be cleared and you can enter a new PIN code.
43
XV648UO9CO6. pdf 12 2009/07/t0 1t:25:46