Manual

Usingthe HDMITM settings feature
This menu consists of the following items (new HDMI
capabilities) and will be grayed out on non-HDMI
inputs.
Some HDMI legacy sources may not work properly
with your HDMI TV, please try setting the following
options (Deep Color, Lip Sync, and INSTAPORT TM) to
Off. Adjusting these settings should allow your HDMI
legacy source to operate properly with your TV.
• Deep Color: On
This feature allows the HDMI source to increase
available colors bits within the boundaries defined by
the RGB or YCbCr color space.
• Lip Sync: On
The Lip Sync feature allows your HDMI source such
as an audio receiver to adjust audio delay to match the
video processing delay of the TV.
° INSTAPORTTM: On
This feature reduces the lag time when switching
HDMI sources.
° RGB Range: Auto
This feature adjusts RGB full range signal
automatically.
When limit is selected, RGB output signal is output in
the range from 16 to 235. When Full is selected, RGB
output signal is output in the range from 0 to 255.
All of the above HDMI settings need proper HDMI
source devices. If an HDMI source device does not
support these features, the TV may not work properly
when these features are enabled.
Note: If your HDMI connection is capable of 1080/9 and/or
your TV is capable of refresh rates greater than 60 Hz or
supports Deep Color, you will need a High Speed HDMI TM
cable. Conventional HDMI/DVI cables may not work
properly with this mode.
] Select the appropriate HDMI input mode (HDMI 1,
HDMI 2, or HDMI 3).
2 From the SETUP menu, highlight AV Connection
and press _.
3 Press • or • to select HDMI Settings.
4 Press • or • to highlight the item you want to set.
5 Press < or • to select your desired setting.
Setting the HDMITM audio mode
To set the HDMI audio mode:
1 From the SETUP menu, highlight AV Connection
and press _.
2 Press • or • to select PC/HDMI 1 Audio.
3 Press < or • to select HDMI 1.
4 Press • or • to select HDMI 1 Audio.
5 Press < or • to select Auto, Digital or Analog, (Auto
is the recommended mode) and press E×'cT.
Auto
When viewing the HDMI 1 input, if
digital audio from the HDMI input is
available, it will be output. If not, the TV
will automatically detect and output
analog audio from the PC/HDMI 1
Audio il"tput.
%qlen viewing the HDMI 1 input, digital
Digital audio from the HDMI input will be
output.
%qlen viewing the HDMI 1 input,
Analog analog audio from the PC/HDMI 1
Audio input will be output.
51
XV648U 09006. pdf 20 2009/07/t0 1t:25:47