MANUEL DE L’UTILISATEUR Série numérique L73** Série numérique M83**
Français Contenu Sélection du mode d’affichage ou du format 3D .................................................... 30 Réglage du mode démarrage auto ..................... 31 Réglage de la Profondeur 2D à 3D..................... 32 Réglage du code 3D PIN .................................... 32 Réglage de la fonction Message de démarrage 3D .................................................. 32 Réglages de la fonction Verrouiller 3D ............... 33 Réglage de la fonction Programmer Minuteur 3D ..........
SERVICES DE TEXTE Services de texte........................................................ 87 Sélection des Modes........................................... 87 Informations Télétexte ........................................ 87 Parcourir les pages en mode Auto...................... 87 Parcourir les pages en mode LIST ..................... 87 Touches de commande ...................................... 88 RÉSOLUTION DES PROBLÈMES Questions-Réponses ................................................
Français INSTALLATION DU TÉLÉVISEUR Consignes de sécurité UTILISER un chiffon doux pour nettoyer l’appareil. Cet appareil a été conçu et fabriqué conformément aux normes internationales de sécurité. Toutefois, comme tout appareil électrique, il convient de respecter certaines consignes afin d’assurer un fonctionnement optimal en toute sécurité. Veuillez lire attentivement ce qui suit pour votre propre sécurité.
INSTALLATION DU TÉLÉVISEUR Français Installation et informations importantes Où installer l’appareil Placez le téléviseur à l’abri de la lumière directe du soleil et Vis des éclairages puissants. Un éclairage doux et indirect est (fournie) recommandé pour un meilleur confort de visualisation. 9 mm Utilisez des rideaux ou des stores pour empêcher que la 20 mm lumière du soleil n’éclaire directement l’écran.
Français INSTALLATION DU TÉLÉVISEUR Veuillez prendre note La fonction de réception numérique de ce téléviseur n’est disponible que dans les pays énumérés à la section « Pays » du menu « Installation ». Selon le pays et la zone, certaines fonctions du téléviseur pourront ne pas être disponibles. La réception de services supplémentaires ou modifiés à l’avenir ne peut être garantie avec ce téléviseur.
INSTALLATION DU TÉLÉVISEUR 19 20 Référence rapide de votre télécommande.
Français CONNEXION DE VOTRE TÉLÉVISEUR Connexion d’un équipement externe Avant de connecter un équipement externe, débranchez toutes les connexions au secteur. S’il n’y a pas d’interrupteur, débranchez les fiches des prises murales. L’ILLUSTRATION AFFICHE 40L.
CONNEXION DE VOTRE TÉLÉVISEUR Fonction ARC (canal de retour audio) de l’appareil HDMI L’entrée HDMI sur votre téléviseur reçoit les signaux vidéo numériques non compressés et le signaux audio numériques d’un appareil source HDMI. Cette fonction permet d’envoyer le signal audio provenant du téléviseur à l’amplificateur AV via le câble HDMI.
Français CONNEXION DE VOTRE TÉLÉVISEUR Connexion d’un appareil compatible avec la commande HDMI CEC Vous pouvez commander les fonctions de base des appareils audio/vidéo connectés à l’aide de la télécommande du téléviseur si vous connectez un amplificateur AV ou un lecteur compatible HDMI CEC. Pour une explication de la configuration et de l’utilisation, voir pages 85–86.
CONNEXION DE VOTRE TÉLÉVISEUR Pour connecter un PC à la prise RGB/PC Dans le cas d’une connexion HDMI ou RGB/PC vous pouvez regarder l’affichage de votre ordinateur sur le téléviseur. Lors de la connexion d’un ordinateur à la prise RGB/PC sur le téléviseur, utilisez un câble analogique pour ordinateur RGB (15 broches). l’arrière de votre téléviseur Pour connecter un PC à la prise HDMI Ordinateur Pour connecter un ordinateur à la prise HDMI du téléviseur, utilisez un câble HDMI (connecteur de type A).
Français CONNEXION DE VOTRE TÉLÉVISEUR Connexion d’un réseau domestique Le port LAN permet de connecter votre téléviseur Toshiba à votre réseau à domicile. Vous pouvez utiliser ce système révolutionnaire de réseau domestique de divertissement pour accéder aux fichiers photos, vidéo et audio mémorisés sur le serveur média et les lire/afficher sur votre téléviseur. REMARQUE: • Si vous vous connectez à un réseau partagé hors de chez vous, nous vous conseillons d’utiliser un routeur.
CONNEXION DE VOTRE TÉLÉVISEUR Français Commandes et connexions d’entrée Il est possible de connecter un grand nombre d’équipements externes différents aux prises d’entrée sur le côté du téléviseur. Tous les réglages nécessaires du téléviseur se font par la télécommande. Les touches à l’avant de l’appareil peuvent toutefois être utilisées pour certaines fonctions. L’ILLUSTRATION AFFICHE 40L. INTERFACE COMMUNE DVB L’Interface commune est pour le Module d’accès conditionnel (CAM).
Français CONNEXION DE VOTRE TÉLÉVISEUR Utilisation du système de menu Appuyez sur la touche afficher le menu. Appuyez sur B / b Appuyez sur B / b et OK ou c Réglage d’enregistrement de la télécommande pour Options Le menu s’affiche sous forme d’une liste à huit rubriques. Chaque symbole peut être sélectionné en appuyant sur B / b de la télécommande, et les options respectives apparaissent sur la droite. Configuration de Media Player Réglage MHL Config.
CONFIGURATION DE VOTRE TÉLÉVISEUR d Avant de mettre le téléviseur sous tension, assurez-vous que votre antenne est connectée et, le cas échéant, que votre décodeur/ enregistreur multimédia est connecté et en mode veille. Appuyez sur BbC c pour mettre en surbrillance Suite et appuyez sur OK. L’écran Lieu s’affiche.
Français CONFIGURATION DE VOTRE TÉLÉVISEUR Il existe 3 méthodes pour effectuer les réglages sans fil: REMARQUE : • Le code de sécurité doit répondre aux conditions suivantes: - TKIP/AES: 8 à 63 caractères ASCII ou 64 caractères hexadécimaux - WEP: 5 ou 13 caractères ASCII ou 10 ou 26 caractères hexadécimaux • Il n’y a qu’un code pour le cryptage WEP. • Réglage facile (WPS) - L’utilisation de cette méthode est possible si le point d’accès est compatible avec WPS.
CONFIGURATION DE VOTRE TÉLÉVISEUR Lorsque le réseau est accessible, la mise à niveau logiciel démarre automatiquement. Lorsque la mise à niveau logiciel est terminée, passez à l’étape suivante. o Quand Cryptage est réglé sur WEP, le réglage Saisir Compte est disponible. Appuyez sur B / b pour sélectionner Saisir compte et appuyez sur c et B / b pour sélectionner la touche 1 (par défaut), 2, 3 ou 4. Appuyez sur OK, et l’écran Commande marche TV s’affiche.
Français CONFIGURATION DE VOTRE TÉLÉVISEUR s Appuyez sur b pour mettre en surbrillance Commencer scan, et appuyez sur OK. Réglages satellite Le téléviseur commencera à rechercher toutes les chaînes DTV et/ou ATV disponibles. La barre de progression indique l’état de la recherche. Sans Type de commutateur Sans Alimentation LNB Marche Num. 1 ToneBurst Satellite Ant. Astra 19.
CONFIGURATION DE VOTRE TÉLÉVISEUR w Si votre antenne satellite est mobile, l’écran Positionnement suivant s’affiche. Positionnement Transpondeur 1/120 (10729 MHz V (R)) Retour à 0 Aller à la position mémorisée Taille des pas 1 Positionnement W E Satellite : Astra 19.2E Niveau du signal Réglages satellite Type de commutateur Sans Alimentation LNB Marche Num. 1 30% Mémoriser la position Satellite Ant. Astra 19.
Français CONFIGURATION DE VOTRE TÉLÉVISEUR x f Si le test de réception s’achève avec succès, l’écran de démarrage Recherche automatique s’affiche. Lorsque la fonction Ant/Câble/Satellite est définie sur Câble, les options de réglage suivantes s’affichent dans l’écran Recherche automatique.
CONFIGURATION DE VOTRE TÉLÉVISEUR À partir du menu de configuration système, vous pouvez ajouter les satellites que vous désirez regarder et configurer des réglages détaillés pour chacun individuellement. Pour ajouter un satellite : a Appuyez sur et B / b pour mettre en surbrillance l’icône Installation. b Appuyez sur c et B / b pour sélectionner Syntonisation de canaux et appuyez sur OK. c Appuyez sur b pour sélectionner Réglages satellite et appuyez sur OK.
Français CONFIGURATION DE VOTRE TÉLÉVISEUR c Pour supprimer un transpondeur : a b Dans le menu Réglages transpondeur, appuyez sur B / b pour mettre en surbrillance la ligne que vous souhaitez supprimer. Recherche automatique Appuyez sur la touche ROUGE. REMARQUE: Quand de nouveaux services sont diffusés, il est nécessaire de régler à nouveau le téléviseur pour pouvoir y accéder.
CONFIGURATION DE VOTRE TÉLÉVISEUR a Syntonisation Dans le menu Syntonisation de canaux, appuyez sur b pour sélectionner ATV réglage manuel puis appuyez sur OK. < Syntonisation de canaux Le téléviseur peut être réglé manuellement à l’’ide de la fonction ATV réglage manuel. Vous pouvez, par exemple, utiliser cette fonction lorsqu’il est impossible de raccorder un enregistreur multimédia/décodeur à l’aide d’un câble péritel, ou si vous souhaitez régler une chaîne sur un autre Système.
Français CONFIGURATION DE VOTRE TÉLÉVISEUR g h Passer Chaque signal apparaîtra à l’écran. S’il ne s’agit pas de votre enregistreur multimédia, appuyez à nouveau sur B / b pour relancer la recherche. Pour empêcher la visualisation de certaines chaînes, vous pouvez les bloquer. a Lorsque le signal de votre enregistreur multimédia est localisé, appuyez sur c pour sélectionner Chaîne. Utilisez BbC c pour insérer les caractères requis, par exemple VCR.
CONFIGURATION DE VOTRE TÉLÉVISEUR Il est possible de déplacer et de mémoriser les chaînes aux positions de votre choix. a b REMARQUE: Cette fonction dépend du réglage Ant/ Câble/Satellite. Sélectionnez ATV Réglage Manuel dans le menu Syntonisation de canal. Recherche manuelle Cette fonction est destinée aux techniciens ou vous pouvez l’utiliser pour saisir directement des chaînes si vous connaissez le canal multiplex.
Français CONFIGURATION DE VOTRE TÉLÉVISEUR Recherche manuelle pour DVB-C Réglages DTV Lorsque la fonction Ant/Câble/Satellite est définie sur Câble, Réglage TNT Manuel, les options sont les suivantes : Chaînes (Antenne/Câble) L’ordre des chaînes peut être modifié en fonction des préférences personnelles.
CONFIGURATION DE VOTRE TÉLÉVISEUR c sélectionner la chaîne que vous souhaitez déplacer et appuyez sur OK pour vérifier. Si vous souhaitez déplacer plusieurs chaînes à la fois, sélectionnez une autre chaîne, puis validez de la même façon. Recommencez la procédure autant de fois que nécessaire. Une fois que vous avez vérifié toutes les chaînes souhaitées, appuyez sur B / b pour mettre en valeur la position sur laquelle vous souhaitez déplacer les chaînes.
Français COMMANDES ET FONCTIONS Commandes générales Mode Lecteur multimédia Menu rapide Le Menu rapide vous permet d’accéder rapidement à certaines options, notamment Mode d’image, Format d’image, Plus d’information, Arrêt différé etc. Appuyez sur QUICK pour ouvrir le Menu Rapide, puis sélectionnez l’option de votre choix à l’aide de la touche B / b. Menu Rapide Intel® WiDi Mode d’image Option du Menu rapide Description Image Voir page 38. Réglages 3D Voir page 30. Son Voir page 34.
COMMANDES ET FONCTIONS Avant d'utiliser la programmation 3D, lire et suivre la partie « Informations importantes pour le visionnage de la 3D » de la page 100. Pour les programmes DTV En cas de transmission stéréo ou bilingue mono, appuyez sur s, puis utilisez la touche C / c pour sélectionner les réglages.
Français COMMANDES ET FONCTIONS Sélection du mode d’affichage ou du format 3D Il existe quatre modes de visualisation des images du téléviseur. Mode Pour passer au mode 3D : • Réglez le Démarrage 3D auto dans le menu 3D au 3D. • Appuyez sur 3D pendant l'affichage du mode 2D ou en mode Natif. Changement de mode d’affichage Appuyez sur le bouton 3D Description Signal d’entrée 3D* Affiche des images 3D. 2D Transforme les images 3D en images 2D. 2D à 3D* Change les images 2D en 3D.
COMMANDES ET FONCTIONS Pour passer au mode Natif : • Réglez le Démarrage 3D auto. dans le menu 3D au 2D. • Appuyez sur 3D pendant l'affichage du mode 3D. • Appuyez sur 3D pendant l'affichage du mode 3D. • Appuyez sur 3D pendant l'affichage du mode 2D à 3D.
Français COMMANDES ET FONCTIONS Description Réglage du code 3D PIN 3D S’affiche en mode 3D automatiquement lors de la réception du signal au format 3D. Un code PIN 3D est nécessaire pour utiliser la fonction Réglages Sécurité 3D. 2D S’affiche en mode 2D automatiquement lors de la réception du signal au format 3D. Arrêt Affiche un écran permettant de sélectionner 3D ou 2D lors de la réception du signal au format 3D.
COMMANDES ET FONCTIONS Réglages de la fonction Activer Minuteur 3D Lorsque cette fonction est activée, vous devez entrer un code PIN 3D pour modifier le mode d’affichage. Cette fonction vous rappelle de ne pas regarder des vidéos 3D pendant une période prolongée. Lorsque la période sélectionnée expire, une boîte de dialogue vous demandant si vous souhaitez poursuivre le visionnage de la vidéo s’affiche. a Dans le menu 3D, appuyez sur B / b pour choisir Réglages Sécurité 3D, puis appuyez sur OK.
Français COMMANDES ET FONCTIONS Commandes du son Installation du téléviseur (Mur/Table) Commandes de volume et de coupure du son Volume Appuyez sur les touches 2+ ou 2– pour régler le volume. Coupure du son Appuyez une fois sur la touche pour couper le son. Appuyez une seconde fois pour remettre le son. La caractéristique de l l'Installation du téléviseur Audyssey peut fournir un son approprié en fonction du type d'installation de la TV, cette TV est installée sur le mur ou sur la table TV.
COMMANDES ET FONCTIONS Français Réglage Niveau Audio Réglages du casque Lorsque vous passez d’une chaîne DTV à 5,1 canaux à une chaîne DTV à 2 canaux, à une chaîne ATV ou à une entrée externe, il peut parfois exister de grandes différences entre les niveaux de volume. La fonction Réglage Niveau Audio permet de réduire ces différences de volume. Ce réglage permet d’ajuster le son lors de la connexion des écouteurs.
Français COMMANDES ET FONCTIONS Affichage plein écran En fonction du type d’émission diffusée, les programmes peuvent être affichés en plusieurs formats. PLEIN ÉCRAN 4:3 Utilisez ce réglage lorsque vous regardez une émission d’un lecteur de disque numérique vidéo grand écran, une cassette vidéo grand écran ou une émission 16:9 (lorsqu’elles sont disponibles). En raison de la gamme de formats grand écran (16:9, 14:9, 20:9 etc.
COMMANDES ET FONCTIONS Français Ce réglage affiche l’image sans surbalayage, c’est-à-dire tel-tel. NATIF Ce réglage affiche l’image sans surbalayage, c’est-à-dire tel-tel. Cette option est disponible uniquement quand vous regardez une source de signal PC via HDMI ou borne PC. PC NORMAL PC PLEIN ÉCRAN Pixel par pixel Appuyez sur la touche Ce réglage affiche l’image sans surbalayage ou sans côté ni panneau latéral.
Français COMMANDES ET FONCTIONS Commandes de l’image La plupart des commandes et des réglages d’image sont disponibles en modes numérique et analogique. VEUILLEZ NOTER : Les fonctions non disponibles sont grisées. Mode d’image Préférences d’affichage Vous pouvez personnaliser les réglages de mode d’image courants comme vous le souhaitez.
COMMANDES ET FONCTIONS Capteur automatique de luminosité La fonction Réglage des couleurs de base permet de régler les couleurs individuelles selon vos préférences. Elle peut s’avérer utile en cas d’utilisation d’une source externe. La fonction Capteur automatique de luminosité permet d’optimiser automatiquement le niveau de rétroéclairage en fonction des conditions d’éclairage ambiant de la pièce.
Français COMMANDES ET FONCTIONS c Réglages mode Expert Appuyez sur B / b pour sélectionner Arrêt, Faible, Moyen ou Fort en fonction de vos préférences, puis appuyez sur OK. Cette fonction est disponible quand l’option Mode d’image est sur Standard, Jour Hollywood, Nuit Hollywood, et Hollywood Pro. REMARQUE: Si le Mode d'image est défini sur Jeux ou PC, cette caractéristique n'est pas disponible.
COMMANDES ET FONCTIONS b Dans le menu Réglages mode Expert, appuyez sur B / b pour sélectionner Décodage Couleur et appuyez sur OK. Appuyez sur B / b pour sélectionner Auto, BT.709 ou BT.601 puis appuyez sur OK. c Appuyez sur C / c pour effectuer les réglages, puis appuyez sur OK. REMARQUE: Les ajustements faient pourRouge / Vert / Bleu sont mémorisés séparément pour chaque réglage IRE. (Il y a dix réglages IRE de10 à 100.
Français COMMANDES ET FONCTIONS Format automatique (Grand écran) Position d’image Si ce téléviseur reçoit une image en format Grand écran véritable et que la fonction Format Auto est définie sur Marche, l’émission est automatiquement affichée en format Grand écran, indépendamment des réglages précédents du téléviseur. La position de l’image peut être ajustée en fonction de vos préférences personnelles ; cette fonction peut être particulièrement utile pour les entrées externes.
COMMANDES ET FONCTIONS Les périphériques Bluetooth™ et LAN sans fil fonctionnent sous la même bande de fréquences radio. Des interférences risquent donc de se produire entre ces appareils. Si vous utilisez des périphériques Bluetooth™ et LAN sans fil simultanément, les performances de votre réseau risquent de diminuer. Il se peut également que vous perdiez la connexion réseau. Le cas échéant, éteignez immédiatement votre périphérique Bluetooth™ ou votre périphérique LAN sans fil.
Français COMMANDES ET FONCTIONS Configuration du réseau Réglage facile en utilisant PBC (Push Button Configuration) Vous pouvez sélectionner le type de réseau. a Dans le menu Réseau, appuyez sur B / b pour sélectionner Configuration réseau et appuyez sur OK. b Appuyez sur B / b pour sélectionner Réglages sans fil et appuyez sur OK. c Appuyez sur B / b pour sélectionner Réglage facile et appuyez sur OK. a Appuyez sur et B / b pour mettre en surbrillance l’icône Réseau.
COMMANDES ET FONCTIONS Réglage manuel Appuyez sur BACK pendant la recherche de point d’accès. Lorsqu’un message s’affiche, appuyez sur C / c pour sélectionner Oui, puis appuyez sur OK. a Dans le menu Réseau, appuyez sur B / b pour sélectionner Configuration réseau et appuyez sur OK. b Appuyez sur B / b pour sélectionner Réglages sans fil et appuyez sur OK. c Appuyez sur B / b pour sélectionner Réglage manuel et appuyez sur OK. d Appuyez sur B / b pour sélectionner Nom du réseau et appuyez sur OK.
Français COMMANDES ET FONCTIONS j Mettez en surbrillance Terminé, puis appuyez sur OK. Option Connecté s’affiche lorsque le téléviseur est connecté au point d’accès. Déconnecté s’affiche lorsque le téléviseur n’est pas connecté au point d’accès.
COMMANDES ET FONCTIONS REMARQUE: • Quand la fonction DHCP du routeur connecté à ce téléviseur est activée, vous pouvez régler Config auto sur Marche ou Arrêt. (Elle doit être habituellement réglée sur Marche.) • Lorsque la fonction DHCP du routeur est désactivée, réglez Config auto sur Arrêt, puis configurez l’Adresse IP manuellement. c d Appuyez sur B / b pour sélectionner Configuration adresse IP et appuyez sur OK.
Français COMMANDES ET FONCTIONS REMARQUE: Les numéros saisis dans le champ de l’adresse DNS doivent être compris entre 0 et 255. Si vous saisissez un numéro incompatible et appuyez sur OK, le numéro du champ reprendra la valeur précédente. Réglages de DNS REMARQUE: Lorsque la fonction DHCP du routeur raccordé à ce téléviseur est réglée sur Arrêt, réglez Config auto sur Arrêt, puis définissez manuellement la ou les adresses DNS. Votre fournisseur de services Internet a dû vous fournir ces adresses.
COMMANDES ET FONCTIONS Réglage du périphérique réseau Vous pouvez saisir du texte à l’aide du clavier virtuel. La fenêtre du clavier virtuel s’affiche lorsque vous appuyez sur OK dans un champ compatible avec la saisie de texte. Profil de commande des Apps Les Apps Toshiba vous permettent de commander le téléviseur à partir d’une tablette ou d’un smartphone connectés au réseau (la disponibilité dépend du pays).
Français COMMANDES ET FONCTIONS Enregistrement du nom de périphérique Configuration du moteur de rendu multimédia Une fois que le nom de l’utilisateur a été authentifié, il est mémorisé dans le téléviseur avec le mot de passe. Le nombre maximum de noms d’utilisateurs mémorisable est de 20. Vous pouvez effacer les noms d’utilisateur mémorisés dans le téléviseur. a Dans le menu Réseau, appuyez sur B / b pour sélectionner Réglage du périphérique réseau et appuyez sur OK.
COMMANDES ET FONCTIONS Cette fonction peut être utilisée pour enregistrer et lire des émissions numériques (la fonction dépend de la sélection du pays). Lisez les précautions ci-dessous avant d’enregistrer ou de voir des programmes en utilisant la fonction d’enregistrement sur disque dur USB. REMARQUE: • Afin d’utiliser cette fonction, un disque dur USB doit être connecté au téléviseur. N’utilisez pas un concentrateur (hub) USB.
Français COMMANDES ET FONCTIONS Comment régler les enregistrements via le Guide de programmes La programmation d’un enregistrement peut être réalisée facilement en utilisant le Guide des émissions ou en spécifiant la date et l’heure. Pour rechercher et enregistrer un programme en utilisant Recherche genre. a VEUILLEZ NOTER Appuyez sur la touche JAUNE sur la télécommande pour accéder à l’écran Recherche genre.
COMMANDES ET FONCTIONS a b Appuyez sur la touche BLEUE sur la télécommande. Pour faire une programmation en utilisant l’écran d’informations: a Sélectionnez la colonne non programmée (colonne vierge) et appuyez sur OK. L’écran Minuterie apparaît. Appuyez sur B / b pour sélectionner Type de minuterie.
Français COMMANDES ET FONCTIONS Pour vérifier, modifier ou supprimer les informations de programmation Pour voir une émission enregistrée Pour afficher l’écran Bibliothèque enregistré et sélectionnez un titre à partir de la liste des programmes enregistrés. Vous pouvez vérifier, modifier ou supprimer les informations de programmation. a a Appuyez sur GUIDE, puis appuyez sur la touche BLEUE. L’écran Programmations apparaît.
COMMANDES ET FONCTIONS En plus de visualiser les titres enregistrés sur l’écran Bibliothèque, vous pouvez protéger ou supprimer des titres et aussi les inscrire au Mode personnel. Pour supprimer une émission enregistrée: Pour afficher l’écran Bibliothèque: a a Appuyez sur et mettez en surbrillance l'icône Mes enregistrements puis appuyez sur OK. L'écran Bibliothèque apparaît. Bibliothèque / Tout Entrez le titre désiré à l’aide du clavier virtuel (voir page 49).
Français COMMANDES ET FONCTIONS Pour sélectionner la taille de TimeShift: Réglage Enregistrement Vous pouvez régler vos préférences pour l’enregistrement. a Pour sélectionner le disque dur USB et la partition pour l’enregistrement: b a Sur l’écran Réglage Enregistrement, appuyez sur B / b pour sélectionner Taille du TimeShift. Appuyez sur c et B / b pour sélectionner 512 MB, 1 GB, 2 GB ou 4 GB et appuyez sur OK. Appuyez sur et B / b pour mettre en surbrillance l’icône Options.
COMMANDES ET FONCTIONS Utilisation du service Cloud TV a Le portail universel de Toshiba pour le contenu et les services Internet (les services dépendent des pays). Sur l’écran Réglage Enregistrement, appuyez sur B / b pour sélectionner Test du périphérique et appuyez sur OK. Le test de fonctionnement du disque dur USB démarre. Attendez que le test se termine. REMARQUE: Les résultats du test du périphérique sont indiqués à titre de référence uniquement.
Français COMMANDES ET FONCTIONS • Certaines pages peuvent ne pas être affichées correctement ou peuvent etre affichées différemment sur différents services. • Certains services peuvent ne pas être disponibles dans votre région. Pour utiliser le navigateur web REMARQUE: Vous pouvez changer le mode de la souris (Émulat. de la souris ou Navigation) en appuyant sur la touche VERTE sur la télécommande lorsque l'écran des contenus web est ouvert.
COMMANDES ET FONCTIONS Les téléviseur Toshiba-Skype Ready vous rapprochent de votre famille et de vos amis. La fonction Skype sur votre téléviseur vous permet de partager vos meilleurs moments quel que soit la distance. Pour commencer a b Avant d’utiliser Skype - Préparation Appuyez sur sur la télécommande. Appuyez sur BbC c pour sélectionner l’icône Skype et appuyez sur OK. L’écran «Bienvenue sur Skype !» apparaît. • Connectez la caméra FREETALK HD: TALK-7291 à la prise USB du téléviseur.
Français COMMANDES ET FONCTIONS b Entrez votre Nom complet, Nom Skype, Mot de passe, Répéter le mot de passe et E-mail. • Si vous souhaitez recevoir des informations relatives à Skype et des offres spéciales, cochez la case de sélection. Skype enverra des informations sur les nouveaux produits ou les offres spéciales par email. c d Opérations de base Appuyez sur B / b pour sélectionner un onglet (Contacts/ Gens, Récent, Réglages). Appuyez sur c et B / b pour sélectionner un contact dans la liste.
COMMANDES ET FONCTIONS Appel entrant Appuyez sur BbC c pour sélectionner Appel vidéo ou Appel vocal, la fenêtre d’appel ci-dessous apparaît. Les appels entrant sur Skype sont affichés dans le coin inférieur droit de l’écran du téléviseur. Vous entendrez aussi une tonalité de sonnerie qui peut être ajustée en utilisant les touches VOLUME de la télécommande. Appel vidéo Vous-même Votre correspondant Appel entrant...
Français COMMANDES ET FONCTIONS Ajouter contact Vous pouvez ajouter des contacts à votre liste de contacts. Quand vous appuyez sur la touche JAUNE, la fenêtre de menu Ajouter type de contact apparaît. Quand vous recevez une demande de contact, un menu contextuel apparait dans lequel vous pouvez choisir Accepter, Bloquer ou Refuser la demande. Appuyez sur B / b pour sélectionner et appuyez sur OK.
COMMANDES ET FONCTIONS Réglages Vous pouvez appeler un numéro de téléphone portable et fixe à partir de cet écran. Appuyez sur B / b pour sélectionner l’onglet Réglages et appuyez sur OK. Appuyez sur B / b pour sélectionner l’onglet Numéroter. Appuyez sur c et B / b pour naviguer sur cet écran. La fenêtre de réglages apparaît.
Français COMMANDES ET FONCTIONS Utilisation de Hybrid TV Standard (si disponible) Hybrid TV Standard permet au téléviseur de recevoir les services HbbTV. Les services de téléviseur qui prennent en charge cette fonction indiquent toujours « appuyez sur ROUGE » sur l’écran. REMARQUE: Vous devez configurer un réseau domestique avant d’utiliser cette fonction (voir page 12). Utilisation de Intel® Wireless Display Intel® Wireless Display (Intel® WiDi) est pris en charge par ce téléviseur.
COMMANDES ET FONCTIONS ® Le nom d’appareil Intel WiDi du téléviseur peut être changé. a Dans le menu Réseau, appuyez sur B / b pour sélectionner Réglage du périphérique réseau et appuyez sur OK. b Appuyez sur B / b pour sélectionner Intel® réglage WiDi et appuyez sur OK. c d e f Appuyez sur B / b pour sélectionner Nom d’appareil Intel® WiDi et appuyez sur OK. Sélectionner Nom d’appareil Intel® WiDi et appuyez sur OK. La fenêtre Clavier virtuel s’affiche.
Français COMMANDES ET FONCTIONS Pour sélectionner un fichier dans la liste des contenus : Opération de base a Utilisation du lecteur multimédia avec USB Lorsque la fonction Démarrage auto est activée, vous êtes invité à indiquer si vous souhaitez démarrer le lecteur multimédia à l’insertion d’un périphérique USB. Si la fonction Démarrage auto est désactivée (ou si vous souhaitez raccorder un serveur multimédia au réseau), vous devez démarrer manuellement le lecteur multimédia à partir du menu.
COMMANDES ET FONCTIONS Affichage des fichiers photo (sur un serveur multimédia ou un périphérique USB) Vous pouvez trier les fichiers par nom de fichier (titre) ou date en conséquence. a Appuyez sur BbC c pour mettre en surbrillance Trier et appuyez sur OK. b Appuyez sur B / b pour sélectionner le Nom du fichier (Titre), Nouveau ou Ancien et appuyez sur OK. Il existe deux types de modes de visualisation.
Français COMMANDES ET FONCTIONS Vue simple (USB et Lecteur réseau Photo) Sélection du mode de lecture : Dans ce mode, seuls les fichiers situés dans le répertoire sélectionné peuvent s’afficher. Cet affichage vous permet de changer de photo manuellement. Lorsque vous passez de la Liste des photos au mode Vue simple, la photo actuellement sélectionnée s’affiche. Vous pouvez voir les photos 3D en 3D et vous pouvez aussi voir les photos 2D en 3D. a b a Appuyez sur c pour visualiser la photo suivante.
COMMANDES ET FONCTIONS Affichage des fichiers films (sur un serveur multimédia ou un périphérique USB) Vous pouvez utiliser la fonction de zoom pendant le mode Vue simple ou le mode Diaporama. Touche ROUGE (Zoom avant) x1 S x2 S x4 S x8 zoom avant Touche VERTE (Zoom arrière) x8 S x4 S x2 S x1 zoom arrière Vous pouvez sélectionner des films à partir d’une Liste de vidéos des fichiers disponibles.
Français COMMANDES ET FONCTIONS Pendant la lecture : Continuer la lecture (USB uniquement) • Appuyez sur W pour mettre en pause. PAUSE peut ne pas être disponible en fonction du contenu ou du serveur multimédia. • Pour reprendre normalement la lecture, appuyez sur c (lecture). • Pour une lecture en mode de retour rapide ou d’avance rapide, appuyez sur CC / cc pendant la lecture. Chaque fois que vous appuyez sur CC / cc, la vitesse de lecture change.
COMMANDES ET FONCTIONS Pour lire un contenu DivX Plus HD: • Pour une lecture en mode de retour rapide ou d’avance rapide, appuyez sur CC / cc pendant la lecture. Chaque fois que vous appuyez sur CC / cc, la vitesse de lecture change. • Ce téléviseur crée un point de chapitre original par incrément de 10% afin de créer 10 chapitres en tout, qui sont accessibles en utilisant les touches numériques de la télécommande.
Français COMMANDES ET FONCTIONS Lecture des fichiers musicaux (sur un serveur multimédia ou un périphérique USB) • Appuyez sur Z pour lire à partir du début du fichier actuellement sélectionné. Appuyez sur z pour localiser les fichiers ultérieurs. Vous pouvez écouter de la musique à partir d’une Liste des musiques des fichiers disponibles.
COMMANDES ET FONCTIONS Netflix® Pour confirmer le Netflix ESN (numéro de série électronique) Bloc. clavier a Dans le menu Réseau, appuyez sur B / b pour sélectionner Configurat. des apps intellignts et appuyez sur OK. Appuyez sur et B / b pour mettre en surbrillance l’icône Options. b b Appuyez sur B / b pour sélectionner ESN et appuyez sur OK. L’écran Netflix ESN s’affiche. Appuyez sur c et B / b pour sélectionner Bloc. clavier et appuyez sur OK.
Français COMMANDES ET FONCTIONS Minuteries e Programmations – numérique uniquement Cette fonction permet de programmer le téléviseur pour qu’il se règle sur une chaîne spécifique à une heure choisie. Elle peut être utilisée pour visualiser une émission donnée, ou pour visualiser plusieurs programmes en réglant le mode sur l’option quotidien ou hebdomadaire. a Heure de mise sous tension (uniquement en mode Activation horloge DTV): réglez l’heure de votre choix à l’aide des touches numériques.
COMMANDES ET FONCTIONS Informations sur l’écran numérique Extinction automatique En mode numérique, les informations à l’écran et le guide des programmes donnent accès aux détails des émissions pour toutes les chaînes disponibles. Le téléviseur s’éteint automatiquement (il passe en mode de veille) au bout de 4 heures si vous n’appuyez sur aucune touche de la télécommande ou du téléviseur. a Appuyez sur et B / b pour mettre en surbrillance l’icône Options.
Français COMMANDES ET FONCTIONS Appuyez sur QUICK pour ouvrir le Menu rapide. Utilisation de EPG (Guide électronique des programmes) Appuyez sur b pour mettre en surbrillance Plus d’information, puis appuyez sur OK.
COMMANDES ET FONCTIONS Dans l’écran du guide, vous pouvez utiliser les fonctions de sélection et de recherche du genre. a b Dans l’écran du guide, appuyez sur QUICK. Appuyez sur B / b pour mettre en surbrillance Couleur genre dans le Menu rapide et appuyez sur OK. Réglages numériques : contrôle parental Pour empêcher la visualisation de films ou d’émissions inappropriés, il est possible de verrouiller des chaînes ou des menus.
Français COMMANDES ET FONCTIONS Réglages numériques : Options Chaînes Niveau verrouillage La fonction Contrôle parental vous permet d’empêcher l’accès à certaines émissions en fonction de leur niveau de classement. Si vous avez défini un code PIN, vous devez le saisir avant de pouvoir définir le niveau. Sélection de vos chaînes favorites a Dans le menu Réglages DTV, appuyez sur B / b pour sélectionner Contrôle parental, puis appuyez sur OK.
COMMANDES ET FONCTIONS Cette fonction vous permet de choisir les chaînes que vous souhaitez omettre lorsque vous utilisez Pu ou PU pour effectuer la syntonisation. a b c d Sous-titres Sélectionnez la chaîne que vous souhaitez omettre dans votre liste de chaînes. Dans le Menu rapide, appuyez sur b pour sélectionner Options Chaînes, puis appuyez sur OK. En mode DTV, cette fonction affiche les sous-titres à l’écran dans la langue sélectionnée, sous réserve qu’ils soient diffusés.
Français COMMANDES ET FONCTIONS Interface commune Le connecteur d’interface commune, situé sur le côté du téléviseur, permet d’insérer un module d’accès conditionnel (CAM) et une carte. Ceux-ci peuvent être obtenus auprès d’un fournisseur de services et permettent de visualiser des émissions disponibles avec un abonnement. Pour obtenir des compléments d’information, veuillez contacter un fournisseur de services.
COMMANDES ET FONCTIONS Vous pouvez consulter à l’écran les licences du logiciel utilisé dans ce téléviseur. a Informations système et Réinitialiser TV Dans le menu Obtenir aide, appuyez sur B / b pour sélectionner Licences de logiciel, puis appuyez sur OK. Un écran apparaît. Il affiche toutes les informations sur les licences correspondant au logiciel du téléviseur. Informations système Cette fonction permet de vérifier la version du logiciel installé.
Français COMMANDES ET FONCTIONS Paramètres PC Horloge d’échantillonnage Position horizontale et Position verticale Connectez le PC (comme indiqué à la section «Connexion d’un ordinateur») et vérifiez qu’une image s’affiche sur l’écran du téléviseur. Réglez la position de l’image en fonction de vos préférences personnelles. a Appuyez sur et B / b pour mettre en surbrillance l’icône Image. b Appuyez sur c, puis sur B / b pour sélectionner Réglages d’affichage, puis appuyez sur OK.
COMMANDES ET FONCTIONS Étiquetage des sources d’entrée vidéo Ces étiquettes d’entrée s’affichent dans le sélecteur d’entrée. Vous pouvez étiqueter les entrées vidéo en fonction des appareils que vous avez raccordés au téléviseur. Voir page 8 pour une image détaillée indiquant les connexions recommandées. La plupart des enregistreurs multimédia et décodeurs envoient un signal par le câble Péritel pour commuter le téléviseur sur la prise d’Entrée correcte.
Français COMMANDES ET FONCTIONS REMARQUE: • Cette fonction est grisée quand Retard Audio est réglé sur Auto. • Un décalage se produit quand le signal vidéo ou le signal audio est changé. Ajustez la synchronisation en fonction. • Lors de l’ajustement de la synchronisation, baissez au maximum le volume de l’équipement Audio-vidéo utilisé. En fonction de l’équipement, du bruit, etc. peut se produire quand le signal est changé. • En fonction de l’équipement connecté (amplificateur, etc.
COMMANDES ET FONCTIONS Il s’agit d’une nouvelle fonction qui utilise la technologie CEC et vous permet de contrôler les appareils Toshiba compatibles HDMI CEC depuis la télécommande du téléviseur via la connexion HDMI (page 10). Si l’élément Activer commande HDMI CEC du menu Config. commande HDMI CEC est réglé sur Marche, les autres fonctions réglées sur Marche seront également activées.
Français COMMANDES ET FONCTIONS c Utilisation de la fonction TV MHL Appuyez sur c pour faire apparaître un deuxième écran de sélection avec tous les équipements de commande HDMI CEC connectés. Vous pouvez utiliser les fonctions suivantes en raccordant la prise TV HDMI 3 et la prise USB d’un téléphone portable, etc. avec un câble MHL.
SERVICES DE TEXTE Ce téléviseur est équipé d’une mémoire Télétexte multi-pages dont le chargement nécessite un certain temps. Il offre deux modes de visualisation du texte : Auto affiche Fastext, si celui-ci est disponible. Liste garde en mémoire vos quatre pages préférées. Sélection des Modes L’ensemble de caractères du texte est sélectionné automatiquement par la sélection de la langue dans le menu Options. a Appuyez sur et B / b pour mettre en surbrillance l’icône Options.
Français SERVICES DE TEXTE Touches de commande Vous trouverez ci-dessous un guide des fonctions des touches Télétexte de la télécommande. k Pour afficher la page d’index/initiale : Appuyez sur k pour accéder à la page d’index ou à la page initiale. La page affichée dépendra du fournisseur de services. TEXT Pour afficher une page Télétexte : Appuyez sur TEXT pour afficher la fonction télétexte. Appuyez à nouveau pour superposer le télétexte sur une image normale.
RÉSOLUTION DES PROBLÈMES Français Questions-Réponses Vous trouverez ci-dessous les réponses aux questions les plus fréquentes. Question Réponse Vérifiez que le téléviseur n’est pas en mode veille. Vérifiez la fiche secteur et toutes les connexions au secteur. Il y a une image mais pas de son ? Vérifiez toutes les connexions des câbles. Pas de son ou réception de sons dans un format non pris en charge. Vérifiez que le volume n’a pas été baissé ou que la touche de coupure du son n’a pas été activée.
Français RÉSOLUTION DES PROBLÈMES Question Réponse Image Pourquoi y a-t-il des bandes La phase d’horloge peut nécessiter un ajustement. Sélectionnez horizontales et/ou des images floues Paramètres PC à partir du menu Réglages d’affichage, mettez en sur l’écran en mode PC ? surbrillance Phase d’horloge, puis ajustez jusqu’à ce que l’image soit claire. Il y a un problème avec la couleur lors Connectez la source à l’aide d’un câble Péritel et réessayez.
RÉSOLUTION DES PROBLÈMES Réponse Pourquoi le réseau sans fil ne fonctionne-t-il pas ? Vérifiez que le point d’accès est sous tension. Généralités Pourquoi la fonction Lecteur Vérifiez que les appareils sont correctement raccordés. multimédia ne fonctionne-t-elle pas ? Un comportement inattendu peut se produire en cas de connexion via un concentrateur USB. Vérifiez si votre configuration réseau utilise un serveur multimédia.
Français INFORMATION Information Avant de connecter un équipement externe, débranchez toutes les connexions au secteur. S’il n’y a pas d’interrupteur, débranchez les fiches des prises murales.
INFORMATION Les entrées HDMI de ce téléviseur prennent en charge uniquement les formats de signaux VGA, SVGA, XGA, WXGA et SXGA conformes au standard VESA, comme indiqué dans le tableau cidessous.
Français INFORMATION Format pris en charge par le lecteur multimédia Lecteur multimédia Format du support Photo JPEG Extension de fichier .jpg .jpeg Codec vidéo Codec audio JPEG USB Réseau Oui Oui Oui Non Oui Non – MPO .mpo MPO – BMP .bmp BMP Remarque USB Compatibilité des données : JPEG Exif version 2.2 Résolution d’affichage maximale: •JPEG 15360 × 8640 (Baseline) 1024 × 768 (Progressive) •BMP 9600 × 6400 Nombre max.
INFORMATION Format du support Extension de fichier Film MOV Musique Codec vidéo Codec audio USB Réseau .mov H.264 (MPEG-4 AVC) MPEG-4 part2 MPEG-1/2 Layer-3 MPEG-2/4 LC-AAC MPEG-4 HE-AAC Oui Non MP4 .mp4 .m4v H.264 (MPEG-4 AVC) MPEG-4 part12,14 MPEG-1/2 Layer-3 MPEG-4 HE-AAC Oui Non H.264 (MPEG-4 AVC) MPEG-2/4 LC-AAC Oui Oui ASF .asf .wmv VC-1 (WMV9) WMA7/8/9/ Std WMA9 Pro Oui Non DivX .divx .div DivX 3,4,5,6 Oui Non Xvid .
Français INFORMATION Format 3D pris en charge (HDMI) Résolution Format d’image Fréquence.V Fréquence.
INFORMATION Français Format 3D pris en charge (DTV) Format vidéo Format d’image Fréquence V Structure 3D 480i, 480p 16:9 59,940/60,000 Hz Côte à côte (moitié) 576i, 576p 16:9 50,000 Hz Côte à côte (moitié) 720p 16:9 59,940/60,000 Hz Côte à côte (moitié) 50,000 Hz Côte à côte (moitié) 59,940/60,000 Hz Côte à côte (moitié) 50,000 Hz Côte à côte (moitié) 24,000 Hz Côte à côte (moitié) 30,000 Hz Côte à côte (moitié) 50,000 Hz Côte à côte (moitié) 59,940/60,000 Hz Côte à côte (moit
Français INFORMATION Informations de licence • Fabriqué sous licence de Dolby Laboratories. Dolby et le symbole du double D sont des marques de Dolby Laboratories. • Les logos DLNA™, DLNA CERTIFIED™, DLNA CERTIFIED sont des marques de commerce, des marques de service ou des marques d’homologation de Digital Living Network Alliance. • Technologie de codage audio MPEG Layer-3 sous licence de Fraunhofer IIS and Thomson. • RealD et le logo RealD sont des marques de commerce de RealD Inc.
INFORMATION Français Déclaration de conformité EU Ce produit porte la marque CE conformément aux directives européennes associées. Le responsable pour la marque CE est TOSHIBA TELEVISION CENTRAL EUROPE Sp. z o.o., ul. Pokoju 1 Biskupice Podgórne 55-040 Kobierzyce, Poland Ce produit possède l’étiquette CE conformément aux directives européennes associées, notamment à la directive basse tension 2006/95/EC, à la directive compatibilité électromagnétique 2004/108/EC et à la directive RoHS 2011/65/UE.
Français INFORMATION Mises en garde et autres informations concernant la 3D Informations importantes pour le visionnage de la 3D Lunettes 3D disponibles: Toshiba FPT-AG03 (L73*5D/M83*5D : 2pcs fournies, L73**RK/L73**RB : 1pcs fournie, L73*3D/L73*1D : Non fourni) ATTENTION • Ce produit contient une pièce/bouton des piles du téléphone. Danger d'explosion si la pile est mal remise. Ne remplacez que par un type identique ou équivalent.
INFORMATION Remarques sur les communications IR • Ne bloquez pas le capteur IR pour les lunettes 3D qui se trouve sur le téléviseur en plaçant des objets devant. • Ne recouvrez pas le capteur IR sur les lunettes 3D avec des autocollants ou des étiquettes. • Gardez le capteur IR des lunettes 3D propre. • L'utilisation des lunettes 3D peut interférer avec les autres appareils de communication IR. Les autres appareils de communication IR peuvent provoquer un mauvais fonctionnement des lunettes 3D.
Français INFORMATION Caractéristiques techniques et accessoires Systèmes de réception Systèmes de diffusion/canaux Systèmes de diffusion/canaux DVB-T UK UHF 21-68 PAL-I UHF UK21-UK69 France VHF 05-10 PAL-B/G UHF E21-E69 (VHF 01-05) VHF E2-E12, UHF 21-69 S1-S41 Allemagne VHF 05-12 SECAM-L UHF F21-F69 UHF 21-69 VHF F1-F10, B-Q Autriche VHF 05-12 SECAM-D/K UHF R21-R69 UHF 21-69 VHF R1-R12 Suisse VHF 05-12 UHF 21-69 Italie VHF 05-12 (D,E,F,G,H,H1,H2) UHF 21-69 Espagne UHF 21-69 Pays-Bas VHF 05-12 UHF 21-69 Gr
© TOSHIBA Television Central Europe Sp. z o.o. Tous droits réservés. Toute reproduction, même partielle, strictement interdite sans autorisation écrite préalable. TOSHIBA Television Central Europe Sp. z o.o. ul.