BENUTZERHANDBUCH Modellreihe M74** Digital Modellreihe L74** Digital
Deutsch Inhaltsverzeichnis Die Uhrzeitanzeige – nur analog........................ 32 Übertragungen in Stereo und 2-Kanalton ........... 32 Verwenden der 3D-Funktionen .................................. 32 Anschauen von 3D-Bildern ................................. 32 Wechseln des Anzeigemodus oder Auswählen des 3D-Formats............................. 33 Einstellen des Auto Start-Modus......................... 34 Anpassen der 2D-auf-3D-Tiefe ........................... 35 Einstellen des 3D PIN-Codes ......
Kanäle überspringen........................................... 80 Kanäle sperren.................................................... 80 Digital-Einstellungen – Weitere Einstellungen ........... 80 Untertitel.............................................................. 80 DVB-Zeichenmenge............................................ 80 Audiosprachen .................................................... 80 Common Interface (CI) ....................................... 81 Gespeicherte CICAM PIN .................
Deutsch Während der Lebensdauer Ihres Fernsehgeräts werden Firmware-Aktualisierungen verfügbar gemacht, um sicherzustellen, dass Ihr Fernsehgerät immer die optimale Leistung bietet. Wenn Ihr Fernsehgerät mit dem Internet verbunden ist, werden Firmware-Aktualisierungen automatisch verfügbar gemacht. Wenn Ihr Fernsehgerät nicht mit dem Internet verbunden ist, können Sie die neueste Version der Firmware bei der folgenden Adresse herunterladen: www.toshiba-om.net/firmware.
AUFSTELLEN IHRES FERNSEHGERÄTS VERWENDEN Sie ein weiches, trockenes Tuch zum Reinigen des Geräts. Dieses Gerät wurde in Übereinstimmung mit internationalen Sicherheitsstandards entwickelt und hergestellt. Wie bei jedem anderen Elektrogerät müssen Sie jedoch die gebührende Vorsicht walten lassen, um eine optimale Funktionsweise und Sicherheit zu gewährleisten. Bitte lesen Sie zu Ihrer eigenen Sicherheit die nachfolgenden Hinweise sorgfältig durch.
Deutsch AUFSTELLEN IHRES FERNSEHGERÄTS Installation und wichtige Informationen Wahl des Standorts Stellen Sie das Fernsehgerät so auf, dass kein direktes Sonnenlicht oder starkes Licht darauf fällt. Wir empfehlen weiches, indirektes Licht, um bequem fernzusehen. Ziehen Sie gegebenenfalls die Vorhänge Das Aussehen des Standfußes zu, oder schließen Sie die Jalousien, damit die Sonne hängt vom jeweiligen Modell ab nicht direkt auf den Bildschirm scheint.
AUFSTELLEN IHRES FERNSEHGERÄTS Die digitale Empfangsfunktion dieses Fernsehgeräts ist nur in den Ländern gültig, die im Abschnitt „Land“ des Menüs „Installation“ aufgeführt sind. Je nach Land/Region kann es vorkommen, dass einige Funktionen dieses Fernsehgeräts nicht zur Verfügung stehen. Es kann nicht garantiert werden, dass auch künftig neu eingeführte oder veränderte Sendeangebote und Dienste mit diesem Fernsehgerät empfangen werden können.
Deutsch AUFSTELLEN IHRES FERNSEHGERÄTS Die Fernbedienung 19 - Smart TV Cloud Home aufrufen 20 - Online Prämium-Inhalte aufrufen 21 Zugriff auf das Bildschirm-Menü 22 Anzeige der digitalen Programmzeitschrift auf dem Bildschirm 23 Verschieben der Seite nach oben, unten, links und rechts 24 Beim Benutzen von Menüs können Sie mit den Pfeilen den Cursor auf dem Bildschirm nach oben, unten, links oder rechts bewegen.
ANSCHLIESSEN IHRES FERNSEHGERÄTS Deutsch Anschluss externer Geräte Schalten Sie alle Geräte am Netzschalter aus, bevor Sie externe Geräte anschließen. Falls das betreffende Gerät über keinen Netzschalter verfügt, ziehen Sie den Netzstecker aus der Steckdose. DIE ABBILDUNG ZEIGT 42L.
Deutsch ANSCHLIESSEN IHRES FERNSEHGERÄTS Anschluss eines HDMI®-Gerätes Der HDMI-Eingang Ihres Fernsehgerätes empfängt digitales Audio und nicht komprimiertes digitales Video von einem HDMI-Quellgerät. An diesen Eingang kann digitales HDCP-Material (HighBandwidth Digital Content Protection) von EIA/CEA-861D-fähigen Geräten der Unterhaltungselektronik (wie eine Set-Top-Box oder ein DVD-Player mit HDMI-Ausgang) eingespeist werden. Welche Videosignalformate geeignet sind, erfahren Sie auf Seite 95.
ANSCHLIESSEN IHRES FERNSEHGERÄTS Sie können die grundlegenden Funktionen der angeschlossenen Audio-/Videogeräte mit der Fernbedienung des Fernsehgeräts steuern, wenn Sie einen AV-Verstärker oder ein Wiedergabegerät anschließen, der bzw. das mit HDMI CEC kompatibel ist. Ausführliche Informationen zur Konfiguration und zu den Funktionen finden Sie auf Seite 86–87.
Deutsch ANSCHLIESSEN IHRES FERNSEHGERÄTS Anschließen eines Computers Mit einer HDMI- oder einer RGB/PCVerbindung können Sie den Fernseher als Computerbildschirm verwenden. So schließen Sie einen PC an den Anschluss RGB/PC an Wenn Sie einen PC an die RGB/PC-Buchse des Fernsehgerätes anschließen, verwenden Sie ein analoges (15-poliges) RGB-Computerkabel.
ANSCHLIESSEN IHRES FERNSEHGERÄTS Über den LAN-Anschluss können Sie Ihr Toshiba-Fernsehgerät an Ihr Heimnetzwerk anschließen. Über das revolutionäre HomeEntertainment-Netzwerksystem können Sie auf Foto-, Video- und Audiodaten, die auf einem Mediaserver gespeichert sind, zugreifen und dann auf dem Fernsehgerät abspielen/anzeigen. HINWEIS: • Wenn Sie eine Verbindung zu einem geteilten Netzwerk außerhalb Ihrer Wohnung herstellen, sollten Sie einen Router benutzen.
Deutsch ANSCHLIESSEN IHRES FERNSEHGERÄTS So schließen Sie das Fernsehgerät an ein Gerät mit Intel® WiDi / wireless display an Bei Verwendung von Intel® WiDi / wireless display sind die verfügbaren Drahtloskanäle auf die nachstehenden Bereiche beschränkt.
ANSCHLIESSEN IHRES FERNSEHGERÄTS Deutsch Bedienelemente und Eingangsanschlüsse Über die Eingangsbuchsen an der Seite des Fernsehgerätes lassen sich verschiedenste externe Geräte anschließen. Obwohl sich alle erforderlichen Anpassungen und Einstellungen an Ihrem Fernsehgerät mit der Fernbedienung vornehmen lassen, können Sie einige Funktionen auch direkt über die am Fernsehgerät angebrachten Tasten steuern. DIE ABBILDUNG ZEIGT 42L.
Deutsch ANSCHLIESSEN IHRES FERNSEHGERÄTS Verwendung des Menüsystems Drücken Sie einzublenden. Drücken Sie B / b Drücken Sie B / b und OK oder c Aufnahme-Einrichtung auf der Fernbedienung, um das Menü Optionen Das Menü erscheint als Liste mit acht Auswahlmöglichkeiten. Wenn ein Symbol durch Drücken von B / b auf der Fernsteuerung ausgewählt wird, werden die entsprechenden Optionen rechts davon angezeigt.
EINRICHTEN IHRES FERNSEHGERÄTS d Vor dem Einschalten des Fernsehgeräts stellen Sie sicher, dass die Antenne angeschlossen und der Decoder/Mediarecorder, falls vorhanden, im Standby ist. Schnellinstallation b Drücken Sie die Taste 1, und das Toshiba-Logo erscheint. Danach wird der Bildschirm Menüsprache angezeigt. Dieser Bildschirm erscheint, wenn das Fernsehgerät zum ersten Mal eingeschaltet wird und jedes Mal, wenn TV zurückstellen ausgeführt wird.
Deutsch EINRICHTEN IHRES FERNSEHGERÄTS Es gibt 3 Methoden für die Funkeinstellung: - AES, AES/TKIP: 8-63 ASCII oder 64 Hexadezimalzeichen - WEP: 5 oder 13 ASCII oder 10 oder 26 Hexadezimalzeichen • Für die WEP-Verschlüsselung muss nur eine Schlüssel-ID eingestellt werden. • Einfache Einstellung - Wenn der Zugangspunkt Wi-Fi Protected Setup unterstützt, kann diese Methode verwendet werden.
EINRICHTEN IHRES FERNSEHGERÄTS p Bei der Verschlüsselung WEP ist die Einstellung der Schlüssel-ID verfügbar. Drücken Sie B / b, um die Schlüssel-ID auszuwählen, und drücken Sie c und B / b, um 1 (Standard), 2, 3 oder 4 auszuwählen. Drücken Sie OK, und der Bildschirm Energieeinstellungen erscheint. Drücken Sie B / b, um Externe Aufnahme Steuerung zu markieren. Drücken Sie c und B / b, um Aus oder Ein auszuwählen, und drücken Sie OK. q Drücken Sie B / b, um Beenden auszuwählen, und drücken Sie OK.
Deutsch EINRICHTEN IHRES FERNSEHGERÄTS v Drücken Sie B / b, um durch die Liste zu gehen und einen Kanal auszuwählen, und drücken Sie dann OK zum Anschauen. ATV-Modus könnten in einigen Bereichen Stationen mit gleichen Adressen erfasst werden und möglicherweise ist das Bild nicht deutlich und das Signal zu schwach. Daher kann die Senderreihenfolge mit ATV Manuelle Sendersuche geändert werden. ERINNERUNG: Drücken Sie zu einer beliebigen Zeit TV, um zwischen den Modi ATV und DTV zu wählen.
EINRICHTEN IHRES FERNSEHGERÄTS Wenn Sie im Schritt 23 die Option Einzelnes Kabel ausgewählt haben, erscheint der Bildschirm Single Cable-Einstellungen. Sie können für jede Option den entsprechenden Wert festlegen und Beenden markieren. Satelliten-Einstellungen Umschalttyp Keine LNB-Leistung Ein Nr. Satellit Schüssel 1 Astra 19.
Deutsch EINRICHTEN IHRES FERNSEHGERÄTS Ant./Kabel/Satellit (falls verfügbar) Über dieses Menü können Sie die RFEingangskonfiguration einstellen. a Drücken Sie und B / b, um das Symbol Installation zu markieren. b Drücken Sie c und B / b, um Kanal Abstimmen auszuwählen, und drücken Sie OK. c Drücken Sie B / b, um Ant./Kabel/Satellit auszuwählen, und drücken Sie OK. d Drücken Sie B / b, um die Option Antenne, Kabel oder Satellit auszuwählen.
EINRICHTEN IHRES FERNSEHGERÄTS Im Menü Systeminstallation können Sie die Satelliten, die Sie abstimmen wollen, hinzufügen und die detaillierten Einstellungen für jeden einzeln konfigurieren. Um einen Satelliten hinzuzufügen: a Drücken Sie und B / b, um das Symbol Installation zu markieren. b Drücken Sie c und B / b, um Kanal Abstimmen auszuwählen, und drücken Sie OK. c Drücken Sie b, um Satelliten-Einstellungen auszuwählen, und drücken Sie OK. Keine LNB-Leistung Ein Nr.
Deutsch EINRICHTEN IHRES FERNSEHGERÄTS Um einen Transponder zu löschen: a Drücken Sie im Menü TransponderEinstellungen die Taste B / b, um die Zeile zu markieren, die Sie löschen möchten. b Drücken Sie die ROTE Taste. c Autom. Sendersuche HINWEIS: Wenn neue Sender den Sendebetrieb aufnehmen, muss die Sendereinstellung des Fernsehgeräts erneut vorgenommen werden, um diese Sender empfangen zu können.
EINRICHTEN IHRES FERNSEHGERÄTS a Abstimmen < Kanalabstimmung Als Alternative zum automatischen Sendersuchlauf können Sie am Fernsehgerät auch die ATV Manuelle Sendersuche vornehmen. Sie können beispielsweise diese Funktion nutzen, wenn das Fernsehgerät nicht per SCART-Kabel an einen Medienrecorder/Decoder angeschlossen werden kann oder wenn Sie einen Sender in einem anderen System einstellen möchten.
Deutsch EINRICHTEN IHRES FERNSEHGERÄTS g h Jedes Signal wird auf dem Fernsehschirm angezeigt. Wenn nicht das Signal vom Medienrecorder angezeigt wird, drücken Sie erneut die Taste B / b, um den Suchlauf wieder zu starten. Wenn das Signal des Medienrecorders gefunden wurde, drücken Sie die Taste c, um den Cursor in das Feld Sender zu setzen. Geben Sie mit BbC c die gewünschten Zeichen ein, z. B. Videorecorder.
EINRICHTEN IHRES FERNSEHGERÄTS Kanäle können auf die Position Ihrer Wahl verschoben und dort gespeichert werden. a Wählen Sie aus dem Menü Kanalabstimmung die Option ATV Manuelle Sendersuche. b Die Kanalliste wird jetzt angezeigt. Markieren Sie mithilfe der Taste B / b den Kanal, den Sie verschieben möchten, und drücken Sie die Taste c. Kanal HINWEIS: Diese Funktion variiert in Abhängigkeit von den Einstellungen Ant./Kabel/Satellit.
Deutsch EINRICHTEN IHRES FERNSEHGERÄTS Manuelle Einstellung für DVB-C Kanaleinstellungen Wenn Ant./Kabel/Satellit auf Kabel eingestellt ist, sind die folgenden Punkte für DTV Manuelle Abstimmung verfügbar: Kanäle (Antenne/Kabel) Frequenz: Geben Sie eine spezielle, zu scannende Frequenz ein. Sie können die Kanalreihenfolge ändern, damit sie Ihren Wünschen entspricht. Modulation: Wählen Sie eine der fünf QAMModulationsoptionen.
EINRICHTEN IHRES FERNSEHGERÄTS Kanäle Reihen-Nr. Kanäle (Satellit) a Wählen Sie aus dem Menü Installation die Option Kanaleinstellungen und drücken Sie OK. b Wählen Sie Kanäle und drücken Sie OK. Die Satellitenkanalliste erscheint. Kanäle Antennen-TV 1/10 Pos. Name 1 ABC ONE 2 ABC TWO 7 ABC THREE 30 CABC Channel 40 ABC NEWS 24 51 ABCi 822 AA 823 AC Satelliten-TV Reihen-Nr. c 1/10 Pos. Name 1 DDD Satellit 19.2°E 2 AB 19.2°E 3 E 19.2°E 801 BBC 22.5°E 802 BB 22.
Deutsch EINRICHTEN IHRES FERNSEHGERÄTS Standby-Kanalaktualisierung Datenübertragung Wenn die Standby-Kanalaktualisierung auf Ein gesetzt ist, wird automatisch die Digitalabstimmung ausgeführt, wenn sich das Fernsehgerät im Standby befindet. Die können Kanalinformation vom Fernsehgerät auf USBSpeicher übertragen, um diese Kanalinformation mit Ihrem PC zu bearbeiten, und Kanalinformation im Fernsehgerät aktualisieren.
BEDIENELEMENTE UND FUNKTIONEN Beispiel Schnellmenü-Element Schnellmenü Mit dem Schnellmenü können Sie schnell auf einige Optionen zugreifen, wie zum Beispiel Bildmodus, Bildgröße, Mehr Infos, Aus-Timer usw. Drücken Sie QUICK, um das Schnellmenü anzuzeigen, und wählen Sie mit B / b die gewünschte Option. Modus SchnellmenüElement Beschreibung Beim Anzeigen eines Fernsehsenders oder von Bildern über den externen Eingang Intel® WiDi / wireless display Siehe Seite 65. Bildmodus Siehe Seite 41.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Die Uhrzeitanzeige – nur analog Verwenden der 3D-Funktionen Die Option Uhrzeitanzeige ermöglicht die Anzeige der aktuellen Uhrzeit (Videotext) auf dem Bildschirm. Vor der Verwendung der 3D-Programmierung schauen Sie bitte im Abschnitt „Wichtige Informationen zum Anschauen von 3D“ auf Seite 101 nach und befolgen Sie dort die Anweisungen.
BEDIENELEMENTE UND FUNKTIONEN So wechseln Sie zum 3D-Modus: • Stellen Sie 3D Auto Start im 3D-Menü auf 3D. • Drücken Sie 3D, während Sie sich im 2D-Modus oder Nativ-Modus befinden. Auslöser zum Wechseln des Anzeigemodus Eingangssignal Typ Zusätzliche Infos 3DFormatsignal Mit 3D Auto Detect Information Ohne 3D Auto Detect Information Beschreibung Zeigt 3D-Bilder an. 2D Wechselt von 3D-Bildern zu 2D-Bildern. 2D zu 3D* Ändert 2D-Bilder in 3D.
Deutsch BEDIENELEMENTE UND FUNKTIONEN So wechseln Sie zum 2D-Modus: So wechseln Sie in den Nativ-Modus: • Stellen Sie 3D Auto Start im 3D-Menü auf 2D. • Drücken Sie 3D, während Sie sich im 3D-Modus befinden. • Drücken Sie 3D, während Sie sich im 3D-Modus befinden. • Drücken Sie 3D beim Betrachten von 2D zu 3D-Modus.
BEDIENELEMENTE UND FUNKTIONEN Sie können die Stufe des 3D einstellen. Aus dem Menü: a Drücken Sie im 3D-Menü auf B / b zur Auswahl von 2D-auf-3D-Tiefe und drücken Sie OK. b Drücken Sie C / c zur Auswahl von 1, 2, 3, 4 oder 5 und drücken Sie OK. Einstellen von 3D Startinformation Wenn diese Funktion auf Ein eingestellt wird, wird eine Meldung auf dem Bildschirm angezeigt, wenn ein 3DSignal empfangen wird. Je höher die Zahl, desto stärker der 3D-Effekt.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Einstellen von 3D Timer aktivieren Diese Funktion hilft Ihnen, sich daran zu erinnern, dass Sie 3D-Videos nicht für längere Zeit schauen sollten. Nachdem eine festgelegte Zeitspanne vorüber ist, wird ein Dialog angezeigt, in dem Sie gefragt werden, ob Sie weiterschauen möchten oder nicht. a b c Drücken Sie im Menü 3D B / b, um 3D Sicherheitseinstellungen auszuwählen, und drücken Sie OK. Geben Sie Ihren vierstelligen 3D PIN-Code ein.
BEDIENELEMENTE UND FUNKTIONEN TruVolume™ Diese Funktion arbeitet nur, wenn bei Ton-Modus die Option Standard gewählt ist. Sorgt für eine gleichbleibende Lautstärke trotz Lautstärkespitzen oder -schwankungen in Inhaltsquellen. Wenn TV-Lautsprecher auf Ein gesetzt ist, können Sie TruVolume auf Ein oder Aus setzen. a Drücken Sie im Menü Erweiterte Toneinstellungen B / b, um Surround auszuwählen, und drücken Sie c und B / b, um Aus, TruSurround oder Depth Rendering auszuwählen.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Tonpegelausgleich Kopfhörerlautstärke Manchmal kommt es zu großen Unterschieden in der Lautstärke, wenn von DTV 5.1-Kanal auf DTV 2-Kanal und ATV-Kanal oder einen externen Eingang umgeschaltet wird. Mit der Funktion Tonpegelausgleich werden diese Lautstärkeunterschiede reduziert. Mit dieser Einstellung wird die Höhe des Tonausganges eingestellt, wenn Kopfhörer angeschlossen sind.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Breitbild Anzeige Je nach Art der Fernsehübertragung können Sie sich Sendungen in verschiedenen Bildformaten anschauen. WIDE Verwenden Sie diese Einstellung für BreitbildDVDs, Breitbild-Videos oder gegebenenfalls bei Sendungen im 16:9- Format. Aufgrund der verschiedenen Breitbildformate (16:9, 14:9, 20:9 usw.) werden unter Umständen schwarze Balken am oberen und unteren Rand des Bildschirms angezeigt.
BEDIENELEMENTE UND FUNKTIONEN PC NORMAL Diese Einstellung zeigt das Bild ohne Overscan-Ränder an, d.h. als wirklichkeitsgetreue Bildschirmwiedergabe (WYSIWYG). Diese Einstellung zeigt das Bild ohne Overscan-Ränder an, d.h. als wirklichkeitsgetreue Bildschirmwiedergabe (WYSIWYG). Diese Einstellungsoption kann nur mit über den HDMI- oder PC-Anschluss eingespeisten Videosignalen erreicht werden. PC WIDE Diese Einstellung zeigt das Bild ohne Overscan-Ränder und Seitenränder an.
BEDIENELEMENTE UND FUNKTIONEN Reset Diese Funktion setzt alle Bildeinstellungen mit Ausnahme von Bildmodus auf die werkseitigen Einstellungen zurück. Die meisten Bild-Steuerelemente und Funktionen sind in beiden Modi, digital und analog, verfügbar. BEACHTEN SIE BITTE: Funktionen, die nicht zur Verfügung stehen, sind grau unterlegt. Bildmodus a Drücken Sie im Menü Bild B / b, um Reset auszuwählen, und drücken Sie OK. b Eine Bestätigungsmeldung wird angezeigt.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Farbeinstellungen Automatischer Helligkeitssensor Die Funktion Farbeinstellungen ermöglicht die Einstellung der einzelnen Farbwerte entsprechend Ihren persönlichen Vorlieben. Das kann sinnvoll sein, wenn Sie eine externe Quelle verwenden. Wenn Automatischer Helligkeitssensor aktiviert ist, wird die Hintergrundbeleuchtung des Gerätes automatisch an die Raumbeleuchtung der Umgebung angepasst.
BEDIENELEMENTE UND FUNKTIONEN Beim Abspielen von DVDs kann es – bedingt durch die Komprimierung – vorkommen, dass einige Wörter oder Bildelemente in der Anzeige verzerrt oder verpixelt sind. Mithilfe der Funktion MPEG Rauschreduz. kann dieser Effekt durch eine sogenannte Kantenglättung vermindert werden. a Drücken Sie im Menü Erweiterte Bildeinstellungen B / b, um Rauschunterdrückung auszuwählen, und drücken Sie OK. b Drücken Sie b, um MPEG Rauschreduz. auszuwählen, und drücken Sie OK.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Farbdecoding Expertenbildeinstellungen Wenn Sie DVDs mit diesem Fernsehgerät betrachten, kann die Option Colour Decoding aktiviert werden, um für eine korrekte Wiedergabe der Farbmetrik zu sorgen. Diese Funktion steht zur Verfügung, wenn als Option Bildmodus Standard, Hollywood-Tag, HollywoodNacht oder Hollywood Pro gewählt ist. HINWEIS: Die Modi außer Automatisch (BT.709 und BT.601) dienen dazu, eine unregelmäßige Signalausgabe von DVD usw.
BEDIENELEMENTE UND FUNKTIONEN a b c Automatische Formateinstellung (Breitbild) Drücken Sie b, um 2P Weissabgleich auszuwählen, und drücken Sie OK. Drücken Sie B / b, um Rot-Offset, Grün-Offset, Blau-Offset, Rot-Gain, Grün-Gain oder BlauGain auszuwählen. Ein weißes Quadrat wird auf dem Bildschirm angezeigt. Drücken Sie C / c, um die Einstellungen vorzunehmen, und drücken Sie OK.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Bildlage Informationen über Wireless LAN Die Bildposition kann individuell angepasst werden. Teilweise ist dies bei externen Quellen hilfreich. Bluetooth™- und Wireless LAN-Geräte arbeiten innerhalb desselben Funkfrequenzbereichs und können sich einander behindern. Wenn Sie Bluetooth™- und Wireless LANGeräte gleichzeitig benutzen, kann es gelegentlich vorkommen, dass keine optimale Netzwerkleistung erzielt wird oder sogar die Netzwerkverbindung unterbrochen wird.
BEDIENELEMENTE UND FUNKTIONEN Deutsch • Wir empfehlen, IEEE 802.11a oder IEEE 802.11n mit 5 GHz für das Audio- oder SD-Video-Streaming zu benutzen. • Wir empfehlen, IEEE 802.11n mit 5 GHz für das HDVideo-Streaming zu benutzen. • Wir empfehlen eine Codierungsrate für den StreamingVideo-Inhalt von maximal 20 Mpbs. • Wir empfehlen, keine 2,4 GHz für das Audio- und VideoStreaming zu benutzen. • Die Wiedergabe des Inhalts kann durch verschiedene Umgebungsstörungen möglicherweise unterbrochen werden.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Einrichten des Netzwerks Manuelle Einstellung (manuelle Eingabe aller Einstellungen) Sie können den Netzwerk-Typ auswählen. Einfache Einstellung mit PBC (Push Button Configuration) a Drücken Sie und B / b, um das Symbol Netzwerk zu markieren. a Drücken Sie im Menü Netzwerk B / b, um Netzwerk-Setup auszuwählen, und drücken Sie OK. b Drücken Sie c und B / b, um Netzwerk-Setup auszuwählen, und drücken Sie OK.
BEDIENELEMENTE UND FUNKTIONEN Manuelle Einstellung Drücken Sie BACK, während nach dem Zugangspunkt gesucht wird. Eine Meldung wird angezeigt. Wählen Sie dann mit C / c die Option Ja und drücken Sie OK. Unterstützte Einstellung a Drücken Sie im Menü Netzwerk B / b, um Netzwerk-Setup auszuwählen, und drücken Sie OK. b Drücken Sie B / b, um die Option Funkeinstellung auszuwählen, und drücken Sie OK. c Drücken Sie B / b, um die Option Unterstützte Einstellung auszuwählen, und drücken Sie OK.
Deutsch BEDIENELEMENTE UND FUNKTIONEN j Markieren Sie Beenden und drücken Sie OK. Menüpunkt HINWEIS: Wenn für Verschlüsselung die Option Keine ausgewählt wurde, wird eine Meldung angezeigt. Drücken Sie C / c, um Ja auszuwählen, und drücken Sie OK. Angeschlossen wird angezeigt, wenn das Fernsehgerät mit dem Zugangspunkt verbunden ist. Abgetrennt wird angezeigt, wenn das Fernsehgerät nicht mit dem Zugangspunkt verbunden ist.
BEDIENELEMENTE UND FUNKTIONEN c Drücken Sie B / b, um die Option IP-AdressenSetup auszuwählen, und drücken Sie OK. HINWEIS: • Wenn die DHCP-Funktion des Routers, der mit diesem TV verbunden ist, auf Ein eingestellt ist, können Sie den Auto-Setup auf Ein oder Aus einstellen. (Dieser sollte normalerweise auf Ein eingestellt sein.) • Wenn die DHCP-Funktion des Routers auf Aus steht, stellen Sie Auto-Setup auf Aus und stellen Sie die IPAdresse manuell ein.
Deutsch BEDIENELEMENTE UND FUNKTIONEN MAC-Adresse DNS-Einstellung Sie können die korrigierte MAC-Adresse für das Fernsehgerät anzeigen (Verdrahtet und Drahtlos). HINWEIS: Wenn die DHCP-Funktion des an diesem Fernsehgerät angeschlossenen Routers ausgeschaltet ist, stellen Sie Auto-Setup auf Aus und stellen Sie die DNS-Adresse(n) manuell ein. Diese erhalten Sie von Ihrem Internet-Provider. Auto-Setup a Drücken Sie im Menü Netzwerk B / b, um Netzwerk-Setup auszuwählen, und drücken Sie OK.
BEDIENELEMENTE UND FUNKTIONEN Sie können Text über die Software-Tastatur eingeben. Das Software-Tastatur-Fenster wird angezeigt, wenn Sie OK bei einem Feld drücken, bei dem die Eingabe von Zeichen möglich ist. Apps-Kontrollprofil So geben Sie Text über die Software-Tastatur ein: a Markieren Sie das gewünschte Zeichen auf der Software-Tastatur auf dem Bildschirm. b Drücken Sie OK. c Wiederholen Sie Schritte 1 und 2, bis Sie den gewünschten Text vollständig eingegeben haben.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Einst. der Gerätereg. Peripheriebaustein Steuerung Nach der abgeschlossenen Authentifikation eines Benutzernamens wird dieser zusammen mit dem Passwort im Fernsehgerät gespeichert. Es können maximal 20 Benutzernamen gespeichert werden. Im Fernsehgerät gespeicherte Benutzernamen können gelöscht werden.
BEDIENELEMENTE UND FUNKTIONEN Aufnahmefunktion der USB-Festplatte Der Gerätename des Fernsehgeräts kann geändert werden. Diese Funktion kann zur Aufnahme und Wiedergabe digital ausgestrahlter Programme verwendet werden (die Funktion ist abhängig von der Auswahl des Landes). Lesen Sie die nachfolgenden Sicherheitshinweise, bevor Sie die USB-HDD-Aufnahmefunktion zur Aufnahme bzw. Wiedergabe von Programmen verwenden.
Deutsch BEDIENELEMENTE UND FUNKTIONEN • Wenn der Stromstecker während der Aufnahme ausgesteckt wird, kann es sein, dass die aufgenommene Sendung nicht gespeichert wird. • Die Funktion zur USB-Festplattenaufnahme ist nicht in allen Ländern verfügbar. • Bei einer Formatierung der USB-Festplatte werden alle auf HDD gespeicherten Daten gelöscht. • Ein gesperrter Kanal kann auch dann nicht aufgenommen werden (One-Touch-Aufnahme, TimeShift), wenn Sie das Programm betrachten.
BEDIENELEMENTE UND FUNKTIONEN • Wenn der Bereich für automatische Aufnahmen erschöpft ist, werden die jeweils ältesten automatischen Aufnahmen automatisch gelöscht. - Die automatische Löschung von automatischen Aufnahmen kann nicht deaktiviert werden. • Programmierungen für automatische Aufnahme und automatische Aufnahmen können wie nachstehend beschrieben in Programmierungen für manuelle Aufnahme und manuelle Aufnahmen geändert werden.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Suche und Aufnahme eines Programms mithilfe der Genre-Suche: a Drücken Sie die GELBE Taste auf der Fernbedienung, um zum Bildschirm Genre-Suche zu gelangen. Genre-Suche Programmierung des Timers: a Drücken Sie auf die BLAUE Taste auf der Fernbedienung. b Wählen Sie die unprogrammierte Spalte (leere Spalte) und drücken Sie OK. Der Bildschirm Bearbeiten erscheint. Drücken Sie B / b, um Timer-Typ auszuwählen.
BEDIENELEMENTE UND FUNKTIONEN a Überprüfen, Ändern oder Löschen von Programmierungs-Informationen Drücken Sie , der Informationsbildschirm erscheint, und zeigt Details über den Kanal und die Sendung an, die gerade angesehen werden. 4 KANAL Z Sie können die Informationen der Programmierung überprüfen, ändern oder löschen.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Eine aufgenommene Sendung ansehen Funktionen auf dem Bildschirm Meine TVBibliothek Anzeige des Bildschirms Meine TV-Bibliothek und Auswahl eines Titels aus der Liste der aufgenommenen Sendungen. Auf dem Bildschirm Meine TV-Bibliothek können Sie sowohl die Liste der aufgenommenen Titel sehen als auch Titel schützen oder löschen und einem Persönlichen Modus zuweisen.
BEDIENELEMENTE UND FUNKTIONEN a Drücken Sie die ROTE Taste. Neben den Titeln erscheinen Kontrollkästchen. b Drücken Sie B / b, um den Titel zu wählen, den Sie löschen wollen, und drücken Sie OK. Ein Häkchen erscheint im Kontrollkästchen. Aufnahme-Einrichtung Sie können Ihre Aufnahmepräferenzen einstellen. Auswählen von USB-HDD und Partition für die Aufnahme: Meine TV-Bibliothek / Alle a Drücken Sie und B / b, um das Symbol Optionen zu markieren.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Auswahl der TimeShift Größe: Funktionstest einer USB HDD durchführen: a Drücken Sie auf dem Bildschirm AufnahmeEinrichtung B / b, um TimeShift Größe auszuwählen. a b Drücken Sie c und B / b, um 512 MB, 1 GB, 2 GB oder 4 GB auszuwählen, und drücken Sie OK. Der Funktionstest der USB HDD beginnt. Warten Sie, bis der Test beendet ist.
BEDIENELEMENTE UND FUNKTIONEN Das universelle Portal von Toshiba für InternetInhalte und Dienste (die Dienste sind vom Land abhängig) bietet Ihnen vielfältige SmartFunktionen. Detaillierte Informationen für den Zugriff auf und die Nutzung dieser Funktionen finden Sie auf unserer Website: http://www.toshiba.eu/smarttv HINWEIS: • Sie müssen zunächst ein Heimnetzwerk konfigurieren, bevor Sie diese Funktion benutzen können (siehe Seite 13).
Deutsch BEDIENELEMENTE UND FUNKTIONEN Verwenden von Hybrid TV Standard (falls verfügbar) Websites aus den Favoriten aufrufen a Drücken Sie auf der Fernbedienung und wählen Sie das Internetsymbol aus, um den Webbrowser zu öffnen. b Drücken Sie BbC c, um den Favoriten-STAR auszuwählen, und drücken Sie OK. c Wählen Sie das Element oder die Ordner aus, die zur gewünschten URL-Adresse verschoben werden sollen und drücken Sie OK.
BEDIENELEMENTE UND FUNKTIONEN Intel® WiDi / wireless display Gerätename Der Intel® WiDi / wireless display Gerätename des Fernsehgeräts kann geändert werden. Intel® WiDi/Wireless Display wird von diesem Fernsehgerät unterstützt. Sie können Ihr Fernsehgerät als Zweitbildschirm für einen PC oder ein anderes Gerät mit Intel® WiDi benutzen. a a b Drücken Sie im Menü Netzwerk B / b, um Netzwerkgerät-Setup auszuwählen, und drücken Sie OK.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Verwenden von My Contents Geräteliste In der Geräteliste wird eine Liste von MAC-Adressen für zuvor angeschlossene Geräte angezeigt. Es können maximal 20 Adressen gespeichert werden. Wenn die Liste voll ist, wird die MAC-Adresse, die am längsten nicht benutzt wurde, gelöscht und die neue MACAdresse automatisch hinzugefügt. a Markieren Sie auf dem Bildschirm Intel® WiDi / wireless display Setup die Geräteliste und drücken Sie OK. Die Geräteliste wird angezeigt.
BEDIENELEMENTE UND FUNKTIONEN Verwenden eines My Contents mit USB Wenn Automatischer Start aktiviert wurde, werden Sie gefragt, ob der My Contents gestartet werden soll, wenn ein USB-Gerät angeschlossen wird. Wenn Automatischer Start deaktiviert wurde (oder wenn Sie sich mit einem Medienserver im Netzwerk verbinden möchten), müssen Sie den My Contents manuell über das Menü starten. Drücken Sie und B / b, um das Symbol Optionen zu markieren.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Auswahl einer Datei aus einer Inhaltsliste: a Drücken Sie BbC c, um eine Datei oder einen Ordner auszuwählen. b Drücken Sie OK, um zur nächsten Ebene zu wechseln, oder drücken Sie BACK, um zur vorherigen Ebene zurückzukehren. Wenn Sie eine Datei auswählen, drücken Sie OK, um sie abzuspielen bzw. anzusehen. Anzeigen von Fotodateien (auf einem Medienserver oder einem USB-Gerät) Es gibt zwei unterschiedliche Anzeigemodi.
BEDIENELEMENTE UND FUNKTIONEN Auswahl des Wiedergabemodus: In diesem Modus sollten nur Dateien, die sich im ausgewählten Verzeichnis befinden, angezeigt werden. Bei dieser Anzeige können Sie den Fotoinhalt manuell ändern. Wenn Sie von der Fotoliste zur Einzelansicht wechseln, wird das aktuell ausgewählte Foto angezeigt. Sie können 3D-Fotos in 3D ansehen und Sie können auch 2D-Fotos in 3D ansehen. a b Drücken Sie c, um das nächste Foto anzuzeigen. Drücken Sie C, um das vorherige Foto anzuzeigen.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Bilder vergrößern/verkleinern (USB und Netzwerk-Player-Fotos): Anzeigen von Filmdateien (auf einem Medienserver oder einem USB-Gerät) Die Zoomfunktion kann im Einzelansicht- oder Diaschaumodus verwendet werden. Sie können Filme aus einer Videoliste mit verfügbaren Dateien auswählen.
BEDIENELEMENTE UND FUNKTIONEN Wiedergabe fortsetzen • Drücken Sie zum Anhalten W. Der Modus PAUSE kann je nach Inhalt oder Medienserver nicht verfügbar sein. • Um die normale Wiedergabe fortzusetzen, drücken Sie c (Wiedergabe). • Für die Wiedergabe im schnellen Vor- oder Rücklauf drücken Sie während der Wiedergabe CC / cc. Jedes Mal, wenn Sie CC / cc drücken, ändert sich die Wiedergabegeschwindigkeit. • Drücken Sie Z, um die Wiedergabe vom Anfang der aktuell ausgewählten Datei zu starten.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Anmelden Ihres Fernsehgeräts an einem DivX®-Konto: Wiedergabe von DivX Plus HD Inhalten: Dieses Fernsehgerät ermöglicht Ihnen, Dateien wiederzugeben, die von DivX® Video-On Demand (VOD)Diensten gekauft oder geliehen wurden. Wenn Sie DivX® VOD-Dateien im Internet kaufen oder leihen, werden Sie aufgefordert, einen Registrierungscode einzugeben. a Drücken Sie im Menü My Contents Setup B / b, um DivX® VOD auszuwählen, und drücken Sie OK.
BEDIENELEMENTE UND FUNKTIONEN Einstellen des Wiederholungsmodus: a Drücken Sie QUICK, um das Schnellmenü zu öffnen. Sie können von einer Musikliste verfügbarer Dateien Musik anhören. b Drücken Sie B / b, um Wiederholen auszuwählen. Musikliste (USB und Netzwerk-Player-Musik) c Drücken Sie c und B / b, um Aus, Alle oder 1 auszuwählen. Videos Geräte: Musik /usb/sda1 Fotos Suchen Modus Sortieren: Datei-Name Gesamtzeit/Datum xxxxxxxxxxx Dateien im selben Ordner werden nur einmal wiedergegeben.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Andere Funktionen Netflix® Bestätigen der Netflix ESN (Elektronische Seriennummer) Bedienfeldsperre Mit der Bedienfeldsperre können die Tasten am Fernsehgerät deaktiviert werden. Alle Tasten der Fernbedienung sind jedoch weiterhin nutzbar. a b c a Drücken Sie im Menü Netzwerk B / b, um Smart Apps Einstellung auszuwählen, und drücken Sie OK. Drücken Sie und B / b, um das Symbol Optionen zu markieren.
BEDIENELEMENTE UND FUNKTIONEN e Meine TV-Timerliste – nur digital Einschaltzeit (nur im Modus DTV-Uhr Ein): Legen Sie die gewünschte Zeit über die Zifferntasten fest. Wiederholen (nur im Modus DTV-Uhr Ein): Wählen Sie die gewünschte Ein-Timer-Funktion (Einm., Täglich, Mo-Fr, Mo-Sa, Sa-So). Eingeben: Wählen Sie eine Videoeingabequelle (ATV, DTV Ant, EXT 1, EXT 2, HDMI 1, HDMI 2, HDMI 3, HDMI 4 oder PC). Kanal: Stellen Sie den Kanal ein, der beim Anschalten des Fernsehgeräts gewählt wird.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Energiespareinstellungen Digitale Information auf dem Bildschirm Automatische Abschaltung Wenn Sie im Digital-Modus fernsehen, können Sie über die Bildschirminformationen und den Programmführer Details zu allen verfügbaren Kanälen aufrufen. Das Fernsehgerät schaltet sich nach der gewählten Zeitdauer automatisch aus (Standby), wenn Sie das Fernsehgerät nicht über die Fernbedienung oder das Bedienfeld am Fernsehgerät bedienen.
BEDIENELEMENTE UND FUNKTIONEN a Drücken Sie QUICK, um das Schnellmenü zu öffnen. b Markieren Sie mit b die Option Mehr Infos und drücken Sie OK.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Genreauswahl/-suche Im Guide-Bildschirm können Sie die Genreauswahl- und suchfunktionen nutzen. a Drücken Sie auf dem Guide-Bildschirm QUICK. b Drücken Sie B / b, um Genre-Farbe im Schnellmenü zu markieren und drücken Sie OK. Digital-Einstellungen – Kindersicherung Um zu verhindern, dass Kinder nicht geeignete Filme oder Sendungen sehen, können Kanäle und Menüs im Digitalmodus gesperrt werden.
BEDIENELEMENTE UND FUNKTIONEN Mit der Funktion Kindersicherung können Sie Sendungen entsprechend ihren Einstufungen blockieren. Wenn eine PIN festgelegt wurde, müssen Sie diese erneut eingeben, bevor Sie die Stufe anpassen können. Digital-Einstellungen – KanalOptionen Wählen von Lieblingskanälen a Drücken Sie im Menü Kanaleinstellungen B / b, um Kindersicherung auszuwählen, und drücken Sie OK. Im Schnellmenü/Menü Kanal-Optionen ist es möglich, eine Liste der meistgesehenen Digitalkanäle zu erstellen.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Kanäle überspringen Mit dieser Funktion können Sie Kanäle einstellen, die übersprungen werden, wenn Sie den Sender mit Pu oder PU einstellen. a Wählen Sie einen Kanal, den Sie in Ihrer KanalListe überspringen möchten. b Drücken Sie im Schnellmenü b, um KanalOptionen auszuwählen, und drücken Sie OK. c Drücken Sie wiederholt c, um das Kästchen für das Überspringen (8) zu markieren. d Drücken Sie zur Auswahl OK. In dem Kästchen erscheint ein Haken.
BEDIENELEMENTE UND FUNKTIONEN Software Upgrade und Lizenzen Der Common Interface-Schacht, der sich an der Seite des Fernsehgeräts befindet, ermöglicht das Einstecken eines CAM (Conditional Access Module) oder einer Karte. Sie können diese von Dienstanbietern erwerben und so zusätzliche Abonnement-Sender sehen. Informationen dazu erhalten Sie von den Dienstanbietern. Wenn Sie es vorziehen, können Sie mit der Option Nach neuer Software suchen manuell nach SoftwareUpgrades suchen.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Software-Lizenzen Die Lizenzen für die mit diesem Fernsehgerät verwendete Software können angezeigt werden. a Drücken Sie im Menü Hilfestellung B / b, um Software-Lizenzen auszuwählen, und drücken Sie OK. Ein Bildschirm mit allen Lizenzinformationen, die für die Software des Fernsehgeräts notwendig sind, wird angezeigt. Systeminformation und TV zurückstellen Systeminformation Mit dieser Funktion können Sie die Version der derzeit installierten Software überprüfen.
BEDIENELEMENTE UND FUNKTIONEN Sampling Clock Mit der Funktion Sampling Clock kann die Anzahl der Impulse pro Bildabtastung eingestellt werden. Dadurch können ggf. im Bild störende senkrechte Streifen beseitigt werden. Horizontale und vertikale Lage Schließen Sie den PC an (siehe Abbildung im Abschnitt ‚Anschließen eines Computers‘), und vergewissern Sie sich, dass auf dem Fernsehschirm ein Bild angezeigt wird. Die Bildposition kann jetzt bei Bedarf individuell angepasst werden.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Auswahl der Eingänge und AVAnschlüsse Benennung der Video-Eingangsquellen Diese Benennung des Eingangs wird bei der Eingangsauswahl angezeigt. Sie können die Videoeingänge entsprechend der Geräte, die Sie an das Fernsehgerät angeschlossen haben, benennen. Auf Seite 9 finden Sie ein Bild mit allen Einzelheiten zu den empfohlenen Anschlüssen.
BEDIENELEMENTE UND FUNKTIONEN Wenn Sie einen Surround-Sound-Verstärker an den digitalen Audioausgang anschließen (Sony/Philips Digital Interface Format [S/PDIF], können Sie die folgenden Optionen auswählen oder anpassen. a Drücken Sie im Menü Ton B / b, um Digitaler Tonausgang auszuwählen, und drücken Sie OK.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Verwendung der HDMI-CECSteuerung Autom. Bereitschaftsbetrieb Wenn Autom. Bereitschaftsbetrieb aktiviert ist, schaltet das Fernsehgerät beim Ausschalten (Standby) automatisch alle angeschlossenen HDMI-CEC-Geräte aus. Diese neue Funktion bedient sich der CECTechnologie und ermöglicht das Steuern von HDMI-CEC-kompatiblen Geräten von Toshiba mit der Fernbedienung des Fernsehgeräts über eine HDMI-Verbindung (Seite 11).
BEDIENELEMENTE UND FUNKTIONEN Direkte Wiedergabe per HDMI-CECSteuerung Wenn ein HDMI-CEC-Gerät mit HDMI-Umschaltfunktion (z. B. AV-Verstärker) am HDMI-Eingang angeschlossen ist, können Sie ein weiteres HDMI-CEC-Gerät auswählen, das am HDMI-Hauptgerät auf der Eingangsquellenliste angeschlossen ist. Wenn ein angeschlossenes Gerät eingeschaltet wird, erkennt die HDMI-CEC-Steuerung das Fernsehgerät automatisch über die Eingangswahl.
Deutsch BEDIENELEMENTE UND FUNKTIONEN Verwenden der MHL-TV-Funktion Sie können die folgenden Funktionen verwenden, indem Sie den HDMI-3-Port an Ihrem Fernsehgerät mit dem USB-Port von Mobiltelefonen usw. über ein MHL-Kabel verbinden. • Aufladen des Mobiltelefons vom Fernsehgerät • Zwei-Wege-Fernbedienung zwischen Fernsehgerät und Mobiltelefon • Video/Audio-Ausgabe vom Mobiltelefon HINWEIS: Diese Funktionen stehen je nach angeschlossenem Gerät möglicherweise nicht zur Verfügung.
VIDEOTEXT Dieses Fernsehgerät verfügt über einen Videotext-Speicher mit einer Kapazität von mehreren Seiten. Es kann einen Moment dauern, bis dieser sich auflädt. Es gibt zwei Modi zur Anzeige von Text – mit Automatisch wird Fastext angezeigt, falls verfügbar. Mit Liste können Sie Ihre vier Lieblingsseiten speichern. Auswahl des Modus Wenn Sie eine Seite öffnen, die Unterseiten enthält, werden die Unterseiten automatisch in Folge angezeigt.
Deutsch VIDEOTEXT Steuertasten Auf dieser Seite finden Sie eine kurze Anleitung, wie Sie mithilfe der Tasten auf der Fernbedienung die Anzeige des Videotextes steuern können. k So zeigen Sie die Index-/Startseite an: Drücken Sie k, um zur Index-/Startseite zu gelangen. Welche Seite dabei angezeigt wird, hängt vom jeweiligen Sender ab. TEXT So wird eine Videotext-Seite angezeigt: Drücken Sie TEXT, um den Videotext anzuzeigen.
PROBLEMLÖSUNG Deutsch Fragen und Antworten Auf dieser Seite finden Sie Antworten zu einigen der häufigsten Fragen. Frage Antwort Vergewissern Sie sich, dass der Fernseher sich nicht im StandbyModus befindet. Überprüfen Sie den Netzstecker und alle Netzanschlüsse. Es wird zwar ein Bild angezeigt, jedoch ohne Ton. Warum? Überprüfen Sie alle Kabelverbindungen. Es kann kein Ton oder kein Ton im richtigen Format empfangen werden.
Deutsch PROBLEMLÖSUNG Frage Bild Warum werden auf dem Bildschirm im PC-Modus waagerecht verlaufende Streifen und/oder verschwommene Bilder angezeigt? Antwort Unter Umständen müssen Sie Clock Phase einstellen. Wählen Sie im Menü Anzeige-Einstellungen PC-Einstellungen aus, markieren Sie Clock Phase und passen Sie die Einstellung an, bis das Bild wieder deutlich sichtbar ist.
PROBLEMLÖSUNG Allgemeines Antwort Die LAN-Kabel sind entweder gar nicht oder nicht ordnungsgemäß angeschlossen. Schließen Sie alle Kabel an (siehe Seite 13). Stellen Sie sicher, dass die Netzwerk-Adresse richtig eingestellt ist (siehe Seite 51). Warum funktioniert das drahtlose Netzwerk nicht? Warum funktioniert die My Contents Funktion nicht? Überprüfen Sie, ob der Zugangspunkt eingeschaltet ist.
Deutsch INFORMATION Information Schalten Sie alle Geräte am Netzschalter aus, bevor Sie externe Geräte anschließen. Falls das betreffende Gerät über keinen Netzschalter verfügt, ziehen Sie den Netzstecker aus der Steckdose. Signalinformationen für 15-polige Mini-D-Sub-Anschlüsse Stift-Nr. Signalname Stift-Nr. Signalname Stift-Nr.
INFORMATION Die HDMI-Eingänge an Ihrem Fernsehgerät akzeptieren die Signalformate VGA, SVGA, XGA, WXGA und SXGA, die mit VESA kompatibel sind, wie in der unteren Tabelle gezeigt. Bei einigen PCs und HDMI- oder DVI-Geräten, bei denen die Eingangssignale von der Auflösung und Frequenz abweichen, die in der Tabelle unten beschrieben werden, kann es zu folgenden Anzeigefehlern kommen: falsche Anzeige, falsche Formaterkennung Bildpositionsfehler, Unschärfe oder Flattern.
Deutsch INFORMATION Vom My Contents unterstütztes Format My Medienformat Contents Foto JPEG Dateierweiterung .jpg .jpeg Videocodec Audiocodec JPEG USB Netzwerk Ja Ja Ja Nein Ja Nein – MPO .mpo MPO – BMP .bmp BMP – Hinweis USB Datenkompatibilität: JPEG Exif Ver 2.2 Maximale sichtbare Auflösung: •JPEG 15360 × 8640 (Referenzwert) 1024 × 768 (Progressiv) •BMP 9600 × 6400 Maximale Anzahl der Dateien: 1000/Ordner Netzwerk Datenkompatibilität: JPEG Exif Ver 2.
INFORMATION Dateierweiterung Film MOV Musik Videocodec Audiocodec USB Netzwerk .mov H.264 (MPEG-4 AVC) MPEG-4 part2 MPEG-1/2 Layer-3 MPEG-2/4 LC-AAC MPEG-4 HE-AAC Ja Nein MP4 .mp4 .m4v H.264 (MPEG-4 AVC) MPEG-4 part12,14 MPEG-1/2 Layer-3 MPEG-4 HE-AAC DTS Ja Nein H.264 (MPEG-4 AVC) MPEG-2/4 LC-AAC Ja Ja ASF .asf .wmv VC-1 (WMV9) WMA9 Std Ja Ja WMA7/8 WMA9 Pro Ja Nein DivX .divx .div DivX 3,4,5,6 Ja Nein Xvid .
Deutsch INFORMATION 3D unterstütztes Format (HDMI) Auflösung Bildfor matratio V.Frequenz 1280 × 720p 16:9 59,940/60,000 Hz H.
INFORMATION Deutsch Lizenz-Information • Hergestellt unter Lizenz von Dolby Laboratories. Dolby und das Doppel-DSymbol sind Markenzeichen von Dolby Laboratories. • Die Begriffe HDMI und HDMI HighDefinition Multimedia Interface sowie das HDMI Logo sind Marken oder eingetragene Marken von HDMI Licensing, LLC in den USA und/oder anderen Ländern. • Dieses Produkt enthält die Adobe® Flash® Player-Software unter Lizenz von Adobe Systems Incorporated. Copyright© 1995-2009 Adobe Systems Incorporated.
Deutsch INFORMATION EU-Konformitätserklärung (Nur EU) Dieses Produkt trägt das CE-Kennzeichen in Übereinstimmung mit den entsprechenden europäischen Richtlinien.
INFORMATION Wichtige Informationen zum Anschauen von 3D VORSICHT • Die 3D-Aufnahmefunktion wurde für private Nutzung und Unterhaltung in Ihrer Heimumgebung entworfen. Bitte beachten Sie, dass jede kommerzielle Nutzung der 3DAufnahmefunktion zu Verletzung vom Copyright von Autorenrechten führen kann. Toshiba bittet Sie, die Rechte an geistigem Eigentum Dritter zu respektieren.
Deutsch INFORMATION • Für optimalen 3D-Effekt und um Augenermüdung zu verhindern, ist es wichtig , dass Sie die richtige Betrachtungsposition wählen. Die beste Betrachtungsposition ist im angegebenen Betrachtungsabstand, wobei Ihre Augen in der gleichen Höhe wie die Mitte des Displays sind, wie unten gezeigt. Die Mitte des optimalen Betrachtungsbereichs ist je nach Gerät unterschiedlich.
INFORMATION Deutsch Technische Daten und Zubehör Empfangssysteme DVB-T Empfangssystem/-kanäle Empfangssystem/-kanäle UK UHF 21-68 PAL-I UHF UK21-UK69 Frankreich VHF 05-10 PAL-B/G UHF E21-E69 (VHF 01-05) VHF E2-E12, UHF 21-69 S1-S41 Deutschland VHF 05-12 SECAM-L UHF F21-F69 UHF 21-69 VHF F1-F10, B-Q Österreich VHF 05-12 SECAM-D/K UHF R21-R69 UHF 21-69 VHF R1-R12 Schweiz VHF 05-12 UHF 21-69 Italien VHF 05-12 (D,E,F,G,H,H1,H2) UHF 21-69 Spanien UHF 21-69 Niederlande VHF 05-12 UHF 21-69 Griechenland VHF 05-12
© TOSHIBA Alle Rechte vorbehalten. Die teilweise oder vollständige Reproduktion ohne schriftliche Genehmigung ist strengstens verboten.