Operating Instructions

English - 21 -
(**) Limited Models Only
Advanced Settings
Equalizer
Selects the equalizer mode. Custom settings can be made only when in User mode.
Dynamic Bass(**)
Enables or disables the Dynamic Bass.
Bass Gain(**)
Controls the bass gain level. Use Left or Right button to set.
DTS DRC
Dynamic Range Control provides gain adjustment of the source to maintain suitable
audible range at both low and high playback levels. It will function only if the source
audio format is DTS. Enable or disable the DTS DRC by setting as On or󰀨.
Sound Mode
You can select a sound mode (if the viewed channel supports).
Digital Out
Sets digital out audio type.
Headphone
Sets headphone volume. This option will not be available if the Sound Output option
is set as Lineout.
Please ensure before using headphones that the headphone volume is set to a low
level, to prevent damage to your hearing.
Balance
Sets sound balance. This feature will be activated if Sound Output option is set as TV
or Headphone Only. Balance item adjusts the balance level of the TV speakers and
headphones together.
Reset
Resets some of the sound settings to factory defaults.
Network Menu Content
Network Type
Disable the network connection or change the connection type.
Scan Wireless
Networks
Start a search for wireless networks. This option will be available if the Network Type
is set as Wireless Device.
Disconnect

previously saved), highlight this option and press OK. This option will not be available
if you did not connect to a wireless network. Refer to Connectivity section for more
information.
Press WPS on your

If your modem/router device has WPS, you can directly connect to it using this option.
Highlight this option and press OK. Go to your modem/router device and press the
WPS button on it to make the connection. This option will be available if the Network
Type is set as Wireless Device.
Internet Speed Test
Start a speed test to check your connection bandwidth. The result will be displayed on

Advanced Settings

Networked Standby
Mode
Enable or disable this feature by setting it as On or 󰀨.
Note: For detailed information on the options of this menu refer to the Connectivity section.