WL86* Digital Series YL86* Digital Series YL87* Digital Series EUROPEAN UNION ECOLABEL Awarded to goods or services which meet the environmental requirements of the EU ecolabelling scheme
English Contents CONTROLS AND FEATURES General controls ...............................................................................31 Quick Menu ..............................................................................31 Selecting channels ................................................................31 The Time Display – analogue only .................................31 Stereo and Bilingual transmissions .................................31 INSTALLING YOUR TV Safety Precautions ...............
Digital on-screen information and Programme Guide ......81 Information ..............................................................................81 Guide ..........................................................................................82 Genre selection/searching .................................................82 Wireless LAN Information .............................................................48 Digital settings – parental control ...........................................
English Using MHL TV function ..................................................................96 Connecting an MHL-compatible Device .......................96 Operating an MHL-compatible Device ..........................96 MHL Setup ................................................................................96 TEXT SERVICES Text services ......................................................................................97 Selecting modes ...........................................................
INSTALLING YOUR TV English Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products, and some points may not apply to the goods you have just purchased.
English INSTALLING YOUR TV Installation and important information Where to install Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Fixing strap Place the TV on a stable, level surface that can support the weight of the TV.
INSTALLING YOUR TV If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays, video games, on-screen menus, etc. are left on the television screen for any length of time, they could become conspicuous. It is always advisable to reduce both the brightness and contrast settings. Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3 outlines.
English INSTALLING YOUR TV When using the 3D glasses Available 3D glasses: Toshiba FPT-AG02G YL86 and YL87 series : Supplied WL86 series : Not supplied Cautions on watching 3D images • Some viewers may experience a seizure or blackout when exposed to certain flashing images or lights contained in certain 3D television pictures or video games.
INSTALLING YOUR TV • 3D effect and image quality may vary depending upon content quality and display device capability/ functionality/settings. • If you use any device, such as a mobile phone or mobile wireless device, near the 3D glasses, the 3D glasses may not work correctly. • Use the product in the following temperature range; otherwise, the quality of the 3D image or the reliability of the product cannot be guaranteed.
English INSTALLING YOUR TV About the Camera Sensor The camera sensor installed in this TV can detect a person’s face or movement and identify individuals by their registered faces. Please note that certain factors can affect the performance of the sensor function as set out below. General Sensor Function • For the sensor to operate (for each function) you will need to be within the sensor detection range as set out below. • The approximate effective detection range of the camera sensor is as shown below.
INSTALLING YOUR TV English The remote control Simple at-a-glance reference of your remote control.
English CONNECTING YOUR TV Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket.
CONNECTING YOUR TV The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device. To connect a DVI device Connect an HDMI-to-DVI adaptor cable (HDMI type A connector) to the HDMI 3 terminal and audio cables to the PC/ HDMI 3 (AUDIO) socket (see illustration). • The recommended HDMI-to-DVI adaptor cable length is 6.6 ft (2m).
English CONNECTING YOUR TV REGZA-LINK connection You can control the basic functions of connected audio/video devices using the television’s remote control if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and operations, see pages 93–95. the back of your television AV amplifier Playback device Playback device For the setup shown above, you will need three HDMI cables.
CONNECTING YOUR TV With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the television’s speakers. • When PC input mode is selected, some of the television’s features will be unavailable e.g. Colour System in the Setup/System Setup menu. • Some PC models may output unique signals that the television may be unable to detect (see page 104).
English CONNECTING YOUR TV Connecting a home network The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are stored on a DLNA CERTIFIED™ server and play/display them on your TV. To connect the TV to a home network with an internet connection - Wireless Please refer to “Wireless Setup” section on page 49.
CONNECTING YOUR TV English Setting up the USB HDD To connect an USB HDD (not supplied) USB HDD USB2 USB cable (not supplied) NOTE: For available USB HDD information, see "Product Information" on the website. To register an USB HDD While in the list mode, the following key operations are available: OK button................. To register/remove RED button .............. To disconnect GREEN button ........ To change Device Name YELLOW button..... To test BLUE button............
English CONNECTING YOUR TV Controls and input connections A wide variety of external equipment can be connected to the input sockets on the side of the television. While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. USB 1 port Media Player COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM). Contact a service provider.
CONNECTING YOUR TV English MENU structure To open the main menu (illustration below) , press MENU on the remote control or on the TV control panel. Genre Search Programme Timers Library Setup TV Programmes Media Player Guide Function 1st Layer Press MENU. Connected TV 2nd Layer Press C c / B. Press C c. 3rd Layer Press OK. Press BbC c.
English SETTING UP YOUR TV g Startup Application Before switching on the television, set your decoder and media recorder, if applicable, to Standby. To set up the television, use the buttons on the remote control as detailed on page 11. Quick Setup a AutoView AutoView mode automatically adjusts picture settings to suit ambient light conditions. Do you wish to enable AutoView mode? No h Press the 1 button. The Menu Language screen will appear.
SETTING UP YOUR TV Press C or c to view the DTV (digital channel) or ATV (analogue channel) lists. l Press B or b to move through the list to select a channel and press OK to view. Press B or b to highlight Store Position and press OK to store the dish position. Repeat steps 13 and 14 for the next satellite as necessary. If your satellite dish is not movable, the Positioning screen will not appear. In ATV mode, some areas may receive duplicate stations.
English SETTING UP YOUR TV e When Ant/Cable/Satellite is set to Cable, the following setting options will be provided in the Auto Tuning screen. Press B or b to select an item and press C or c to select your desired option. Auto Tuning Tuning Mode Satellite Settings From the System Setup menu, you can add the satellites that you wish to tune and configure detailed settings for each one individually. To add a satellite: a Press MENU / C c to highlight Setup icon.
SETTING UP YOUR TV To delete a transponder: a In the Satellite Settings menu, press B to highlight Switch Type. a b Press C or c to select None, ToneBurst, DiSEqC 2way or DiSEqC 4way as your satellite switch type. b c Press b to highlight LNB Power and press C or c to select On or Off. English To edit the satellite settings: In the Transponder Settings menu, press B or b to highlight the line you want to delete. Press the RED button.
English SETTING UP YOUR TV e To select the LNB Settings: a In the Satellite Settings menu, press B or b to select the required satellite line and press OK. b Press C or c to highlight LNB and press the GREEN button. For DTV/ATV Tuning: A screen will appear warning that previous programmes and settings will be deleted. Auto Tuning Previous settings will be lost! Press EXIT for no change.
SETTING UP YOUR TV Tuning In the System Setup menu, press b to select ATV Manual Tuning and press OK. System Setup Menu Language The television can be tuned-in manually using ATV Manual Tuning. For example, you might use the feature if the television cannot be connected to a media recorder/decoder with a SCART lead or when you want to tune-in a station on another System.
English SETTING UP YOUR TV g h Each signal will show on the television. If it is not your media recorder, press B or b again to restart the search. d Use B or b to turn Skip on. Press OK. 8 on the screen indicates a skipped position. When your media recorder signal is found, press c to move along to Station. Use B, b, C and c to put in the required characters, e.g. VCR.
SETTING UP YOUR TV Manual Tuning for DVB-C NOTE: The content of this menu varies depending on the DTV input (Antenna, Cable, or Satellite) that is currently selected. When Ant/Cable/Satellite is set to Cable, DTV Manual Tuning items are as follows: Frequency – input a specific frequency to be scanned Manual Tuning Modulation – choose from one of five QAM modulation options This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known.
English SETTING UP YOUR TV DTV Settings Move — Press the GREEN button to activate the Move feature. Press the B or b buttons to select the channel you wish to move and press OK to check. If you wish to move multiple channels at once, select another channel and check in the same way. Repeat as necessary. Once all desired channels have been checked, press the B or b buttons to place the focus at the position to which you wish to move the channels.
SETTING UP YOUR TV a Sorting Type — Press C or c to set the sorting type. Select DTV Settings from the System Setup menu and press OK. A-Z Sort Station name order (A to Z) Number Position No. order (numerical sequence) b Select Channels and press OK. Preset Order — Press C or c to set Yes or No. The satellite channel list will appear. This item is displayed when Country is set to Germany, and only applies to the Astra 19.2°E satellite. Channels Line No. 3/1200 Pos.
English SETTING UP YOUR TV Location setting You can select either Home or Store mode. Home is recommended for normal home use. Select Store when using the television for displaying in a shop, etc. a Select Location from the System Setup menu. b Press C or c to select Home or Store. Analogue switch-off This is a digital television which is integrated to allow the use of both digital and analogue services.
CONTROLS AND FEATURES Mode Photo Frame (Full Screen) Quick menu item Picture Picture Size 3D Settings Personal Mode Quick Menu Quick Menu helps you access some options quickly, such as Picture Mode, Picture Size, Personal Mode, More Information, Sleep Timer etc. Press QUICK to display the Quick Menu and use B or b to select the option. Quick Menu Picture Mode AutoView Picture Size Super Live Description See page 41. See page 39. See page 34. See page 91.
English CONTROLS AND FEATURES Using 3D functions To set the 3D glasses: Before using 3D programming, see and follow “When using the 3D glasses” section on page 8. a Viewing 3D programming requires the following: b • TOSHIBA 3D Glasses FPT-AG02G YL86 and YL87 series : Supplied WL86 series : Not supplied • Compatible 3D playback device or 3D source • 3D capable high quality HDMI cable Turn the 3D glasses on with the power switch.
CONTROLS AND FEATURES If a right and left images are same in Native mode, select SBS. Incoming video signals can either be in 2D or 3D format. A 2D signal can be viewed in either 2D or 3D, and 3D can be viewed in either 2D or 3D. If the TV can detect the fact that a signal is 3D, it can change to 3D mode automatically – see “Setting the auto start mode” (on page 35). Otherwise you can change the viewing mode using the 3D button.
English CONTROLS AND FEATURES To select 3D format from the Quick menu in 3D mode: To select 2D format from the Quick menu in 2D mode: a Press QUICK to display the Quick Menu. a Press QUICK to display the Quick Menu. b Press B or b to select 3D Settings and press OK. b Press B or b to select 3D Settings and press OK. c Press B or b to select 3D Format Select and press OK. c Press B or b to select 2D Format Select and press OK. d Press C or c to select Side by Side or Top and Bottom.
CONTROLS AND FEATURES Controls what the TV does when it detects a 3D signal. a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK. c To change or delete your PIN code: a In the Preferences menu, press B or b to select 3D Setup and press OK. b Press B or b to select 3D PIN Setup. c Press the number buttons to enter your 4-digit PIN code. Press B or b to select 3D Setup and press OK. d Select Change PIN or Delete PIN and press OK.
English CONTROLS AND FEATURES Setting 3D Lock When this feature is set to On, you must enter 3D PIN code for changing display mode. a In the Preferences menu, press B or b to select 3D Setup and press OK. b Press B or b to select 3D Safety Settings and press OK. Displaying 3D Important Info a In the Preferences menu, press B or b to select 3D Setup and press OK. b Press B or b to select 3D Important Info and press OK. Adjusting 2D to 3D Depth c Enter your 4-digit 3D PIN code.
CONTROLS AND FEATURES Volume controls and sound mute c Press C or c to select either Stand or Wall depending on how your TV is installed and press the RED button. d Press C or c to select the frequency range you want to adjust from the equalizer window and press B or b to adjust the level. Volume Press y or Y to adjust the volume. Sound Mute Press once to turn the sound off and again to cancel.
English CONTROLS AND FEATURES NOTE: • The Dolby Volume setting influences the Dynamic Range Control and Digital Audio Output settings. • This feature will automatically switch Off when Dynamic Range Control is set to On or Digital Audio Output is set to Auto. Headphone Settings This setting is used to set the sound output when headphones are connected. Speaker Link Headphone Speakers Dynamic Range Control On Sound is output (2 – + is available.
CONTROLS AND FEATURES English Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. WIDE 4:3 Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen. Use this setting to view a true 4:3 broadcast.
English CONTROLS AND FEATURES NATIVE This setting will show the picture without overscan, i.e. WYSIWYG. PC NORMAL This setting will show the picture without overscan, i.e. WYSIWYG. This option is only available when watching a PC signal source via HDMI or PC terminal. PC WIDE This setting will show the picture without overscan or side panels. This option is only available when watching a PC signal source via HDMI or PC terminal. Dot by Dot Press the “Dot by Dot” is a non-scaling display.
CONTROLS AND FEATURES English Picture controls Picture preferences You can customize current picture mode settings as desired. For example, while selecting “Dynamic”, if you change the following items, such as Backlight, Contrast, Brightness, Colour, Tint, Sharpness and the Advanced Picture Settings items, your new settings are saved for “Dynamic” picture mode. Most of the picture controls and functions are available in both digital and analogue modes.
English CONTROLS AND FEATURES Base Colour Adjustment Auto Brightness Sensor Settings The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful when using an external source. When the Auto Brightness Sensor is activated, it will automatically optimise the backlighting levels to suit ambient light conditions. a In the Advanced Picture Settings menu, press B or b to select Base Colour Adjustment and press OK.
CONTROLS AND FEATURES English Black/White Level Resolution+ Black/White Level increases the strength of dark areas of the picture to improve the definition. The Resolution+ feature allows you to adjust the clarity levels for your desired picture settings. a In the Advanced Picture Settings menu, press B or b to select Black/White Level. a b Press C or c to adjust the level. The effect depends on the broadcast and is most noticeable on dark colours.
English CONTROLS AND FEATURES 3D Judder Cancellation This feature will reduce 3D images blur without adding flicker. a b Colour Decoding Press C or c to select Auto or Off. If you view DVDs with this TV, the Colour Decoding option may be set to ensure the colourimetry reproduction. Resetting the advanced picture settings This feature allows you to reset the current Advanced Picture Settings to the default values. b Press EXIT.
CONTROLS AND FEATURES Colour Calibration The aim of Colour Calibration is to measure and/or adjust the colour response (White Balance) of your LCD panel. Colour Calibration is used by various fields, such as gaming, photography, engineering, medical and more. In order to calibrate a display correctly, you need a colour analyzer TPA-1 (not supplied). Auto Colour Calibration a b c b Press B or b to select Apply Calibration and press C or c to select Enabled.
English CONTROLS AND FEATURES Control Visualization 4:3 Stretch This feature displays the brightness histogram and control curve of the current video signal. When 4:3 Stretch is activated, the size switching system changes 4:3 programmes into full screen picture. a In the Picture menu, press B or b to select Control Visualization and press OK. The histogram window will appear. a In the Preferences menu, press B or b to select Display Settings and press OK.
CONTROLS AND FEATURES English Picture still This feature is used to hold a still image on the screen. a Press r to hold an image on the screen, and press r again to cancel. HDMI Information Display When the HDMI Information Display feature is On and you are watching an HDMI input source, pressing the button displays the HDMI signal information banner. a In the Preferences menu, press B or b to select HDMI Information Display. b Press C or c to select On.
English CONTROLS AND FEATURES Wireless LAN Information Bluetooth™ and Wireless LAN devices operate within the same radio frequency range and may interfere with one another. If you use Bluetooth™ and Wireless LAN devices simultaneously, you may occasionally experience a less than optimal network performance or even lose your network connection. If you should experience any such problem, immediately turn off either your Bluetooth™ or Wireless LAN device.
CONTROLS AND FEATURES Easy Setup using PBC (Push Button Configuration) You can select the Network Type. a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK. c Press B or b to select Network Setup and press OK. a In the Preferences menu, press B or b to select Network Setup and press OK. b Press B or b to select Wireless Setup and press OK. c Press B or b to select Easy Setup and press OK.
English CONTROLS AND FEATURES To cancel searching for the AP: f Press B or b to select Authentication and press C or c to select Open System, Shared Key, WPA-PSK or WPA2-PSK. g Press B or b to select Encryption and press C or c to select None, WEP, TKIP or AES. Press BACK while searching for the AP. A message will appear; then, press C or c to select Yes and press OK. Assisted Setup a In the Preferences menu, press B or b to select Network Setup and press OK.
CONTROLS AND FEATURES The settings configured in Wireless Setup can be confirmed. a Press QUICK to open the Quick Menu. NOTE: Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or TKIP, the Speed value might be low. It is recommended that Encryption be changed to AES (see “Manual Setup” on page 50). Notes on wireless LAN environment: b Press B or b to select Wireless Information and press OK.
English CONTROLS AND FEATURES d DNS Setup Highlight Auto Setup and press C or c to select On. IP Address Setup Auto Setup On IP Address XXX . XXX . XXX . XXX Subnet Mask 255 . 255 . 255 . Default Gateway . . 0 . NOTE: When the DHCP function of the router connected to this TV is Off, set Auto Setup to Off, and manually set the DNS address(es). Your internet service provider should have provided these to you. Auto setup: NOTE: Other items will be grayed out when Auto Setup is set to On.
CONTROLS AND FEATURES Using the software keyboard You can view the fixed MAC address for the TV. a In the Preferences menu, press B or b to select Network Setup and press OK. b Press B or b to select Advanced Network Setup and press OK. c You can enter text by using the Software Keyboard. The Software Keyboard window will appear when you press OK on a field that accepts character input. To enter text using the software keyboard: a Highlight the desired character on the on-screen software keyboard.
English CONTROLS AND FEATURES Network Device Setup Media Renderer a In the Preferences menu, press B or b to select Network Device Setup and press OK. b Press B or b to select Media Renderer Setup and press OK. c Press B or b to select Media Renderer, and then press C or c to select On or Off. External Control Setup This setup allows you to operate a home network-connected your TV from an external device.
CONTROLS AND FEATURES When the TV is connected to the home network via Wireless LAN, Wake-on-LAN can be received from an external device connected to the home network to turn on the TV. a b In the Preferences menu, press B or b to select Network Device Setup and press OK. Press B or b to select Power Control Mode and press C or c to select On or Off. NOTE: • When Wired is selected for the Network type in Network Setup, this feature will be grayed out.
English CONTROLS AND FEATURES To record DTV programmes (One Touch Recording) c 10:50 Tue, 26 Apr Set Timer The Daily Politics You can easily record the programme currently being viewed. a Press OK. The Set Timer menu will appear. 2 CABC Channel 11:30 - 12:30 Tue, 26 Apr Press the ● REC button on the remote control. Timer Type Recording for the currently viewing programmes will start. Recording USB HDD1 Recording Device — Programme Tracking The programme indicator (red) will be lit.
CONTROLS AND FEATURES a b f Press OK. The Set Timer menu will appear. 10:50 Tue, 26 Apr Set Timer The Daily Politics In the Guide screen, press QUICK. 2 CABC Channel 11:30 - 12:30 Tue, 26 Apr Press B or b to highlight Genre Colour in the Quick Menu and press OK.
English CONTROLS AND FEATURES To programme the timer a b Protect: Select this function when you want to protect a recorded programme. When On is selected, the programme will be protected. You can protect and unprotect recorded programmes afterwards. Press MENU / C c / B / C c to highlight TV Programmed / Programme Timers icons and press OK. Select the unprogrammed column (blank column) and press OK. The Set Timer menu will appear.
CONTROLS AND FEATURES d e To delete a schedule Press B or b to highlight Timer Type and press C or c to select Recording. a Press B or b to highlight Recording Device and press C or c to select the connected USB HDD. b Press B or b to highlight Set Timer and press OK. To view a recorded programme Display the Library screen and select the title of the recorded programme from the list. To check, edit or delete scheduling information a You can check, edit or delete scheduling information.
English CONTROLS AND FEATURES c Press C or c to select a day tab or Personal Mode tab. To protect or unprotect a recorded programme NOTE: If no titles have been registered to Personal Mode, Personal Grouping will be grayed out. Protecting a programme prevents it from being accidentally deleted. Select the title of the programme you want to protect and press the GREEN button. icon appears next to the title and the programme is protected.
CONTROLS AND FEATURES a b Quick Menu Personal Grouping c Recording Setup Select the title you want to register to Personal Mode. Press the QUICK button to display the Personal Mode registration menu. You can set your preferences for One Touch Recording or for scheduling recording. To set the recording time for One Touch Recording a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK. c Press B or b to select Recording Setup and press OK.
English CONTROLS AND FEATURES Setting USB HDD Energy-Saving Mode To register a USB HDD a In the Recording Setup screen, press B or b to select Recording Devices and press OK. a b Press B or b to select Device Energy Saving Mode. Recording Devices Device List Device Energy Saving Mode c Normal Press C or c to select Normal or Energy Saving. NOTE: • When set to Energy Saving, it may take a while for the USB HDD to function.
CONTROLS AND FEATURES a If programmed recording is not performed correctly or some other error occurs, you can check the error content using Recording Information. Up to 64 Recording Information entries will be recorded and when the maximum is exceeded, entries will be deleted starting from the oldest. You can delete Recording Information after you have checked it. a b Press B or b to select Recording Information and press OK. The Recording Information screen will appear.
English CONTROLS AND FEATURES Camera Sensor Settings g The Camera Sensor can detect a person’s face or movement and identify individuals by their registered faces. The screen mute and the standby mode functions by the face detection and motion detection functions of the Camera Sensor operate, and power consumption is saved as a result. a In the Preference menu, press B or b to select Camera Sensor Setup and press OK.
CONTROLS AND FEATURES Using YouTube™ A new cloud based service, where content (movies, photos, etc.) can be viewed and shared across the web through a simple user interface called “Toshiba Places”. YouTube is a video-sharing service managed by YouTube, LLC. This TV allows you to view YouTube content. NOTE: You need to configure a home network before using this feature (see page 16). a Press on the remote control, or press MENU / B / C c to highlight Connected TV / Toshiba Places icons and press OK.
English CONTROLS AND FEATURES To use the Drag Mode: Using the Function Menu The Function Menu provides easy access to functions that are commonly used. a Press the BLUE button while displaying YouTube. The Function menu window will appear. Back Forward Reload Home Pointer Menu a Press B or b to select Pointer: ON and press OK. b Press the BLUE button. c From the Function menu, press C or c to select Pointer, and then press OK. d Press B or b to select Drag Mode and press OK.
CONTROLS AND FEATURES Item a Press BbC c to select the setting items, and press OK. A check will appear in the box. To remove the check, press OK again. b Press BbC c to select OK field and press OK. Item When jumping from a protected page to an unprotected page, the message is displayed when the check is applied to Notify of secure/non-secure page changes. Apply the check to select SSL version from SSL Version to use (SSL2.0, SSL3.0, TSL1.0).
English CONTROLS AND FEATURES Using Hybrid TV Standard (if available) Hybrid TV Standard enables the TV to receive HbbTV services. TV services which support this feature often show “press RED” on the screen. NOTE: You need to configure a home network before using this feature (see page 16). Using the Media Player This TV allows you to enjoy movie, music and photo files stored on a USB device connected to the USB port.
CONTROLS AND FEATURES a Using Media Player with USB When Auto Start is enabled, you will be asked if you want to start the Media Player whenever a USB device is inserted. If Auto Start is disabled (or if you want to connect to a DMS on the network), you must manually start the Media Player from the menu. To change the Auto Start setting: Insert USB device into the USB socket on the left side of the TV. b Press MENU / C c to highlight Media Player icon.
English CONTROLS AND FEATURES To display the device information: a b Viewing photo files (on a DLNA CERTIFIED™ Server or USB device) Press QUICK to open the Quick Menu in list mode or Multi View mode. There are three types of viewing modes. Press B or b to select Device Information. Multi View This view allows you to search for photos in a grid format. The pictures are displayed using thumbnail data in each image file.
CONTROLS AND FEATURES b c To zoom in/out photos Press c to view the next photo. Press C to view the previous photo. During the Single View mode or Slide Show mode, the zoom function can be used. Press B to rotate the image 90° clockwise. Press b to rotate the image 90° counterclockwise. RED button: x1 S x2 S x4 S x8 S x16 zoom GREEN button: x16 S x8 S x4 S x2 S x1 zoom BACK button: Normal playback Press to display file status information (file number, photo title, date and time taken, resolution etc.
English CONTROLS AND FEATURES Selecting the Playback Mode Viewing movie files (on a DLNA CERTIFIED™ Server or USB device) You can view 3D photos in 3D and you can also view 2D photos in 3D. You can select movies from a list of available files. Select the playback mode from the Quick Menu or switch playback modes using the 3D button on the remote control. Movie list example The current Playback Mode is displayed at the top left of the list mode.
CONTROLS AND FEATURES To sort the folders and files • Press W/w to pause. You can move to the desired replay position by pressing C or c during PAUSE. PAUSE and operations during PAUSE may not be available depending on the contents, DMC or DMS. • To resume normal playback, press c (play). • To play in fast reverse or fast forward directions, press CC or cc during playback. Each time you press the CC or cc, the playback speed will change.
English CONTROLS AND FEATURES To register your TV to a DivX® account To playback DivX Plus HD content: This TV allows you to play back files purchased or rented from DivX® Video-On Demand (VOD) services. When you purchase or rent DivX® VOD files on the internet, you will be asked to enter a registration code. • To play in fast reverse or fast forward directions, press CC or cc during playback. Each time you press the CC or cc, the playback speed will change.
CONTROLS AND FEATURES You can listen to music from a list of available files. English Playing music files (on a DLNA CERTIFIED™ Server or USB device) To set the repeat mode: a Press QUICK to open the Quick Menu in list mode. b Press B or b to select Repeat. c Press C or c to select Off, All or 1. Music list example MUSIC Title : WWWWWWWWW Artist : WWWWWWWWW Mode 00:00:34 / 00:05:19 /Folder Description Sort : File Name music Off Files in the same folder are played back once.
English CONTROLS AND FEATURES To display the device information a b Press QUICK to open the Quick Menu in list mode. Press B or b to select Device Information and press OK. NOTE: When music files on a USB device are used, or the TV is used as a DMR, this feature is not available. Using the Photo Frame feature You can use the TV screen as a digital photo frame. One image (pre-installed or user-installed) can be displayed. Date info can also be superimposed, if desired.
CONTROLS AND FEATURES Press c to select Start and press OK to open Photo Frame. c Press B b C c to select the photo you want to copy from the USB storage device or DLNA CERTIFIED™ server to the TV’s flash memory, and then press OK. PHOTO /Folder Sort: Title 1/54 XXXXXXXXXXX.jpg 10:00 Fri, 21 Feb 2010 1920x1080 OK Select QUICK Features P Page To open from the Quick Menu a b Photo Edit Press QUICK to open the Quick Menu. Press B or b to select Photo Frame and press OK to open Photo Frame.
English CONTROLS AND FEATURES Other features Settings a Press B or b to select Settings and press OK. b Press B or b to select Clock, Position or Auto Power Off. Panel Lock Panel Lock disables the buttons on the television. All buttons on the remote control can still be used. a Settings --/-- (---) -- 10:10 Press MENU / C c / B / C c to highlight Setup / Preferences icons and press OK.
CONTROLS AND FEATURES On Timer Programme Timers – digital only This feature will set the television to go to a specific channel at a certain time. It can be used to view a particular programme, or by setting the mode to daily or weekly, can be used to view a series of programmes. a Press MENU / C c / B / C c to highlight TV Programmes / Programme Timers icons and press OK. b Press b to select Programme Timers and press OK.
English CONTROLS AND FEATURES Sleep Timer Energy Saving Settings The television can be set to turn itself Off after a certain length of time. a b c d Press MENU / C c / B / C c to highlight Function / Sleep Timer icons and press OK. Automatic Power Down The TV will automatically turn itself off (standby) after 4 hours, if you do not operate the TV either from the remote control or the TV control panel. Use the number buttons to set the desired time.
CONTROLS AND FEATURES When viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels. Information a Press , the information screen will appear giving details of the channel and programme currently being viewed. Display Example 8888 REC ASTRA 19.2° E To display More Information a Press QUICK to open the Quick Menu. b Press b to highlight More Information and press OK.
English CONTROLS AND FEATURES Guide a Genre selection/searching Select the on-screen guide by pressing GUIDE, and the Guide screen will appear highlighting details of the channel and programme currently being viewed. This may take a few moments to appear. 10:50 Tue, 6 Apr Thu6 TV 6 M6 18:00 18:30 19:00 19:30 09 LES SIM... 33 LES SIM... 06 TOP MODEL 09 LES SIMPSON 10 SUMMERLAND 53 SUMMERLAND 9 W9 11 NT1 From the Guide screen, you can use the genre selection and search features.
CONTROLS AND FEATURES English Digital settings – parental control Parental Setup In order to prevent viewing of unsuitable films and programmes, channels and menus can be locked in digital mode. These can then only be accessed with a security code PIN. The Parental Control feature allows you to block programmes according to their rating levels. If a PIN has been set, you will need to enter it before adjusting the level. a In the DTV Settings menu, press B or b to select Parental Control and press OK.
English CONTROLS AND FEATURES Digital settings – Channel Options Skip channels This feature allows you to set channels that will be skipped when Pu or PU are used to tune. Selecting favourite channels a Favourite Channels creates a list of the digital channels that are watched most. Four lists can be created, they can be a mixture of television, radio and text channels. b From the Quick Menu, press b to select Channel Options and press OK. c Press c repeatedly to highlight the skip (8) box.
CONTROLS AND FEATURES Subtitles In digital mode, this feature will show subtitles on the screen in the selected language provided they are being broadcast. a In the DTV Settings menu, press B or b to select Subtitle and Audio and press OK. b Press b to select Subtitle Display and use C or c to select On or Off. Common Interface The Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access Module) and card.
English CONTROLS AND FEATURES Software Upgrade and Licences Network Upgrade TOSHIBA may offer upgrades for the TV’s software in the future. The TV’s software is upgraded via the Network. Auto Upgrade When Auto Upgrade is set to On, the television will automatically upgrade while in standby if new software is available. a b In the System Setup menu, press B or b to select Software Upgrade and press OK. Press B or b to select Over-the-air Upgrade and press OK. c Press B or b to select Auto Upgrade.
CONTROLS AND FEATURES English System Information and Reset TV PC Settings System Information Horizontal and Vertical Position This feature can be used to check the version of software currently installed. When in DTV mode, it includes additional diagnostic information such as signal strength, signal quality, centre frequency, modulation, etc. Connect the PC (as shown in the ‘Connecting a computer’ section) and ensure that a picture is showing on the television screen.
English CONTROLS AND FEATURES Sampling Clock Adjusting the Sampling Clock alters the number of pulses per scan, this will clear vertical lines on the screen. a In the Display Settings menu, press B or b to select PC Settings and press OK. b Press B or b to select Sampling Clock. c Press C or c to adjust until the picture clears. Input selection and AV connections See page 12 for a detailed image showing recommended connections.
CONTROLS AND FEATURES Labeling video input sources This feature is designed to make input selection more convenient by allowing you to skip unused inputs. These input labels are shown in the input selector. You can label video inputs according to the devices you have connected to the TV. a Press MENU / C c / B / C c to highlight Setup / Preferences icons and press OK. b Press B or b to select AV Connection. a Press MENU / C c / B / C c to highlight Setup / Preferences icons and press OK.
English CONTROLS AND FEATURES PC Audio HDMI Settings In order to receive sound from a connected PC, plug the audio cable into the back of the television (as shown in the ‘Connecting a computer’ section), and then use the PC/HDMI 3 Audio setting. Some early HDMI equipment may not work properly with your HDMI TV. Please try setting the Enable Content Type and INSTAPORT™ options to Off. Adjusting these settings should allow your early HDMI source to operate properly with your television.
CONTROLS AND FEATURES Press B or b to select Digital Audio Output. AV Connection Input Labeling PC/HDMI 3 Audio PC Side Shared Audio EXT 2 HDMI 3 Audio Auto HDMI Settings Digital Audio Output c Press OK to display Digital Audio Output menu and press B or b to select an option. Audio Format: Press C or c to select PCM or Auto. PCM: This mode outputs PCM format to the digital audio output socket. Auto: This mode outputs Dolby Digital (if available) or PCM to the digital audio output socket.
English CONTROLS AND FEATURES b Personal TV Setup a Press MENU / C c / B / C c to highlight Setup / Preferences icons and press OK. b Press B or b to select Personal TV Setup and press OK. Personal TV Setup Personal Mode A Personal Mode B Personal Mode C Personal Mode D c Press B or b (or corresponding coloured button) to select the individual Personal Mode and press OK. Display Example Personal TV Setup Display the video image currently being taken by the camera.
CONTROLS AND FEATURES Press B or b to select Volume Type and press C or c to select Preset or Last. Last — The last volume level in your Personal Mode. Preset — The Preset volume level is selected whenever the Personal Mode is switched. Preset Volume Press B or b to select Preset Volume and press B or b to adjust your desired volume level. When the Volume Type is set to Last, this feature will be grayed out.
English CONTROLS AND FEATURES Auto Standby REGZA-LINK input source selection When Auto Standby is enabled, the television, when switched off, will automatically switch off (standby mode) all connected REGZA-LINK equipment. If a REGZA-LINK device with HDMI switching capability (e.g. AV amplifier) is connected to the HDMI input, you can select another REGZA-LINK device that is connected to the master HDMI device on the input source list.
CONTROLS AND FEATURES REGZA-LINK system audio control With the REGZA-LINK mode on your television’s remote control, you can control the connected REGZA-LINK device you are watching. With your television’s remote control, you can adjust or mute the sound volume of the speakers connected to the television via an AV amplifier. To control the REGZA-LINK input source first select the equipment by REGZA-LINK input source selection. a a b Press QUICK to open the Quick Menu.
English CONTROLS AND FEATURES Using MHL TV function You can use the following functions by connecting between the TV HDMI 4 port and an USB port of mobile phones etc. with a MHL cable. • Charge with mobile phone from TV • Two-way remote operation between TV and mobile phone • Video/Audio output from mobile phone NOTE: These functions may not be available depending on the connected equipment.
TEXT SERVICES Navigating pages using Auto This television has a multi-page text memory, which takes a few moments to load. It offers two Modes of viewing text – Auto will display Fastext, if available. List will save your four favourite pages. If Fastext is available, four coloured titles will appear at the base of the screen. To access one of the four given subjects, press the relevant coloured button on the remote control.
English TEXT SERVICES Control buttons Below is a guide to the functions of the remote control text buttons. k To display the index/initial page: Press k to access the index/initial page. The one displayed is dependant on the broadcaster. TEXT To display a page of text: Press TEXT to display text. Press again to superimpose text over a normal picture. Press again to return to normal television viewing. Channels cannot be changed until this has been done.
PROBLEM SOLVING Below are the answers to some of the most common queries. Q A Q A Why is there no sound or picture? a Check the television is not in standby mode. Check the mains plug and all mains connections. There is a picture, but why is there little or no colour? b Colour System b Q A Q A Using B or b adjust to get the best picture and sound. Press OK and then EXIT. 1 Q A Q A Q A Q A Q A Q A System Setup Country Select the ATV Manual Tuning menu. Highlight the station and press OK.
English PROBLEM SOLVING Q A Q A Q A Q A Q A Q A Q A Q A Q A Q A What is DVB-T? Digital Video Broadcast via an aerial/antenna. What is DVB-C? Digital Video Broadcast via a cable connection. How are radio channels selected? Press TV on the remote control and select DTV Radio. Alternatively select from the GUIDE. What can be done if the PIN number has been forgotten? Use the Master PIN code of 1276, then change to a number of your choice.
PROBLEM SOLVING Q A Q A Q A Q A Make sure that devices are connected correctly. Incorrect behaviour may occur with a USB Hub connection. Check your network setup if using DLNA CERTIFIED™ Server. Why are not 3D images displayed? Turn off the TV and unplug the power cord. After 1 minute, plug the power cord in and turn on the TV. 3 Perform the Reset Factory Defaults procedure (see page 87). Why doesn’t the USB HDD work? Register your USB HDD. Use the USB 2 port to connect the USB HDD.
English INFORMATION License Information • This product achieved the European Eco label award issued by the European Commission. You can get more information in following link: http://ec.europa.eu/environment/ecolabel/ • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.
INFORMATION English Cleaning the screen and cabinet… Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. Disposal… The following information is only for EU-member states: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste.
English INFORMATION Information Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. Signal information for Mini D-sub 15 pin connector Pin No. Signal name Pin No. Signal name Pin No.
INFORMATION English Acceptable video or PC signals through the HDMI terminals The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA as shown in the table below. Since some PCs and HDMI or DVI devices input signals which are different from the resolution and frequency described in the table below, the following phenomenon may occur; incorrect display, false format detection, picture position failure, blur, or judder.
English INFORMATION Media Player Supported Format Media Player Photo Movie Media Format File Extension USB DMS JPEG .jpg .jpeg JPEG Yes Yes MPO .mpo JPEG Yes No MPEG-2 PS MPEG-2 TS .mpg .mpeg .ts Video) MPEG-1 Video Yes No Video) MPEG-2 Video H.264 (MPEG-4 AVC) Yes Yes Audio) MPEG-1 Layer1 MPEG-1 Layer2 MPEG-2 Layer2 Dolby Digital (AC-3) L-PCM (MPEG-2 PS only) Yes Yes Audio) Dolby Digital Plus AAC HE AAC Yes MP4 .mp4 .m4v AVI .avi DivX .divx DivX Plus HD .div No Video) H.
INFORMATION English 3D Support Format (HDMI) Resolution Aspect ratio V.Frequency H.Frequency Pixel Clock Frequency 3D Structure 720 × 480p 16:9 59.940/60.000Hz 31.469/31.500kHz 27.000/27.027MHz Side by Side (Full) Side by Side (Half) Top and Bottom 720 × 576p 16:9 50.000Hz 31.250kHz 27.000MHz Side by Side (Full) Side by Side (Half) Top and Bottom 1280 × 720p 16:9 59.940/60.000Hz 90.0/89.91kHz 148.352/148.500MHz Frame Packing 44.955/45.000kHz 74.176/74.
English INFORMATION 3D Support Format (DTV) Video Format Aspect ratio V.Frequency 3D Structure 480i, 480p 16:9 59.940/60.000Hz Side by Side (Half) 576i, 576p 16:9 50.000Hz Side by Side (Half) 720p 16:9 59.940/60.000Hz Side by Side (Half) 50.000Hz Side by Side (Half) 59.940/60.000Hz Side by Side (Half) 50.000Hz Side by Side (Half) 24.000Hz Side by Side (Half) 30.000Hz Side by Side (Half) 50.000Hz Side by Side (Half) 59.940/60.
INFORMATION English Specifications and accessories Receiving systems Power consumption (approx.) 42WL/42YL 46WL/46YL 55WL/55YL UHF E21-E69 VHF E2-E12, S1-S41 Standby power consumption (approx.) 0.3W UHF F21-F69 VHF F1-F10, B-Q On-mode power consumption* (approx.) 42WL/42YL 46WL/46YL 55WL/55YL 94.1W 115W 138W Average annual energy consumption** (approx.) 42WL/42YL 46WL/46YL 55WL/55YL 137.4kWh/y 167.9kWh/y 201.
EU Ecolabel : PL/22/002 For those products that have been awarded the European Eco Label, TOSHIBA gives a minimum of 2 years guarantee for this LCD TV and 7 years availability for replacement of electronic parts. For warranty repairs, please contact the retailer where you purchased the product. Please see the Toshiba website or European Eco Label website (www.ecolabel.eu) for details of those products. © TOSHIBA Television Central Europe Sp. z o.o. All rights reserved.
