Operation Manual

29
SETTING UP YOUR TV
English
a Select DTV Settings from the System Setup menu
and press OK.
b Select Channels and press OK.
The satellite channel list will appear.
c For your convenience, you can edit and sort your
channel list.
Line Number Jump — Press the number buttons
(0-9) to input the line number you want to select and
then press OK.
Station Letter Jump — Press CC or cc to jump
to the next station name with a different initial letter.
Satellite Jump —Press Z or z to jump to the
next channel on a different Satellite.
Renumber — Same as Antenna/Cable channels.
See page 28.
Move — Same as Antenna/Cable channels. See
page 28.
Sort — Press the YELLOW button. A confirmation
window will appear. Press
C or c to select Yes and
press OK.
The Sort menu will appear.
Group —Press C or
c to select All or By Satellite.
Sorting Type — Press C or
c to set the sorting type.
A-Z Sort Station name order (A to Z)
Number Position No. order (numerical sequence)
Preset Order — Press C or
c to set Yes or No.
This item is displayed when Country is set to
Germany, and only applies to the Astra 19.2°E
satellite.
Press
b to highlight Sort and press OK.
If the Standby Channel Update is set to On, when the TV is in
standby mode, Digital Tuning is automatically executed and any
new channels are saved.
a Select DTV Settings from the System Setup menu
and press OK.
b Press b to select Standby Channel Update and
press
C or c to select On.
This feature allows you to manually select the character set
(Standard = Table 0, West = Table 5 or Latin alphabet 9) to
be used for DVB-C or DVB-T channels.
a Select DTV Settings from the System Setup menu
and press OK.
b Press b to select DVB Character Set and press C or
c to select Standard, West or Latin alphabet 9.
If the broadcast information has changed in your DVB-T
receiving area, the TV screen will display the message
“Broadcast information has changed. Would you like to
rescan now?”. Select Yes or No. If you do not wish for the TV to
detect changes and prompt you to rescan, you should set this
feature to “Off”.
a Select DTV Settings from the System Setup menu
and press OK.
b Press b to select Dynamic Scan and press C or c to
select On.
Channels (Satellite)
Channels
Line No. 3/1200
Satellite TV
1 DDD 19.2°E
Pos. Station Satellite
822 AA
823 AC
2AB
3E
801 BBC
802 BB
803 BA
25.6°E
25.6°E
19.2°E
19.2°E
22.5°E
22.5°E
22.5°E
Group By Satellite
Sorting Type Number
Preset Order Yes
Sort
Sort
Standby Channel Update
DVB Character Set
Dynamic Scan