Operation Manual

52
CONTROLS AND FEATURES
English
d Highlight Auto Setup and press C or c to select On.
NOTE: Other items will be grayed out when Auto Setup is set
to On.
Manual Setup:
a In the Preferences menu, press B or b to select
Network Setup and press OK.
b Press B or b to select Advanced Network Setup and
press OK.
c Press B or b to select IP Address Setup and press
OK.
d Highlight Auto Setup and press C or c to select Off.
e Press B or b to select IP Address.
f Press C or c to highlight the field you want to
change, and then use the number buttons to input
the IP address. To save the setting, press OK.
NOTE: IP address field numbers must be between 0
and 255. After each field number has been set, press
OK to store the entire address. If the entire IP Address
is invalid, a warning message will appear after OK is
pressed.
g Press B or b to select Subnet Mask, and edit in the
same way as IP Address.
h Press B or b to select Default Gateway, and edit in
the same way as IP Address.
NOTE: If you manually set the IP address, you must not use
the same IP address for any other device. The IP address you
use should be a private address.
NOTE: When the DHCP function of the router connected to
this TV is Off, set Auto Setup to Off, and manually set the DNS
address(es). Your internet service provider should have
provided these to you.
Auto setup:
a In the Preferences menu, press B or b to select
Network Setup and press OK.
b Press B or b to select Advanced Network Setup and
press OK.
c Press B or b to select DNS Setup and press OK.
d Press B or b to highlight Auto Setup and press C or
c to select On.
NOTE: Other items will be grayed out when Auto Setup is set
to On.
Manual setup:
a In the Preferences menu, press B or b to select
Network Setup and press OK.
b Press B or b to select Advanced Network Setup and
press OK.
c Press B or b to select DNS Setup and press OK.
d Press B or b to select Auto Setup and press C or c
to select Off.
e Press B or b to select Primary DNS Address.
f Press C or c to highlight the field you want to
change, and then use the number buttons to input
the Primary DNS Address. To save the setting, press
OK.
NOTE: DNS address field numbers must be between 0
and 255. If you input an incompatible number and
press OK, the field number will reset to the previous
value.
g Press B or b to select Secondary DNS Address, and
edit in the same way as Primary DNS Address.
Auto Setup On
Subnet Mask
IP Address Setup
IP Address
XXX . XXX . XXX . XXX
255 . 255 . 255 . 0
Default Gateway
. . .
Auto Setup Off
Subnet Mask
IP Address Setup
IP Address
255 . 255 . 255 . 0
Default Gateway
. . .
XXX . XXX . XXX . XXX
Auto Setup Off
Subnet Mask
IP Address Setup
IP Address
255 . 255 . 255 . 0
Default Gateway
. . .
XXX . XXX . XXX . XXX
DNS Setup
Auto Setup Off
Secondary DNS Address
DNS Setup
Primary DNS Address
255 . 255 . 255 . 0
XXX . XXX . XXX . XXX