Operation Manual

54
CONTROLS AND FEATURES
English
Network Device Setup
This setup allows you to operate a home network-connected
your TV from an external device.
Media Controller Setup
a In the Preferences menu, press B or b to select
Network Device Setup and press OK.
b Press B or b to select External Control Setup and
press OK.
c Press B or b to select an option and press OK.
The Software Keyboard window will appear.
User Name — Input the User Name (to control the TV
from the iPhone etc.) by using the on-screen software
keyboard (see page 53). The maximum number of
characters is 16.
Password — Input the Password (to control the TV
from the iPhone etc.) by using the on-screen software
keyboard (see page 53). The maximum number of
characters is 16.
NOTE: Toshiba does not guarantee normal operation with all
connected devices.
Terminology:
DMS: DLNA CERTIFIED™ Server
DMR: DLNA CERTIFIED™ Renderer
DMC: DLNA CERTIFIED™ Controller
The TV can be configured as a DMR. When
operating as a DMR, the TV displays content
provided by a DMS. The selection of the media is
done by the DMC - the TV does not select the input.
The TV can play photo, movie, or audio files when
operating as a DMR.
Media Renderer
a In the Preferences menu, press B or b to select
Network Device Setup and press OK.
b Press B or b to select Media Renderer Setup and
press OK.
c Press B or b to select Media Renderer, and then
press
C or c to select On or Off.
Media Controller Setup
You can limit which DMC can control this TV.
If Access Control is enabled, only those DMCs with a check will
be allowed to control the TV.
a In the Media Renderer Setup menu, press B or b to
select Media Controller Setup and press OK.
b Press B or b to select Access Control and press C or
c to select On.
c Press B or b to select Select Media Controller and
press OK.
d Press B or b to highlight the item you want to select
and press OK. A check will appear in the box.
To remove the check, press OK again.
e Press c to highlight Done and press OK.
NOTE:
• You can select up to 8 DMC devices.
• If you would not like to limit the DMCs for this TV, set Access
Control to Off.
• Devices other than DMCs may be displayed in the list.
Confirm the MAC address of the DMC and set it.
Maximum Volume Setup
This feature allows you to set the maximum volume of the TV
when it receives volume operation commands from a DMC.
a In the Media Renderer Setup menu, press B or b to
select Maximum Volume Setup, and press
C or c to
adjust to the desired volume.
NOTE:
• The TV’s remote control can set volume regardless of the
value of Maximum Volume Setup.
• When DMR playback ends, the TV volume will return to the
value in effect when DMR playback was started.
External Control Setup
Media Renderer Setup
Preferences
Personal TV Setup
REGZA-LINK Setup
MHL Setup
Recording Setup
3D Setup
Network Setup
Camera Sensor Setup
Network Device Setup