Operation Manual

94
CONTROLS AND FEATURES
English
When Auto Standby is enabled, the television, when switched
off, will automatically switch off (standby mode) all connected
REGZA-LINK equipment.
a In the REGZA-LINK Setup menu, press b to highlight
Auto Standby.
b Press C or c to select On or Off.
When Amplifier Control is set to On, it allows the “Initial
Speaker Setting” feature to become available.
a In the REGZA-LINK Setup menu, press b to highlight
Amplifier Control.
b Press C or c to select On or Off.
This feature allows the audio output preference to be set to the
TV speakers or AV amplifier speakers. The AV Amplifier option lets
the television’s remote control adjust or mute the volume of the
audio.
a In the REGZA-LINK Setup menu, press b to highlight
Initial Speaker Setting.
b Press C or c to select TV Speakers or Amplifier.
When Position Key Pass Through for the selected HDMI input
mode is set to On, the P
U Pu and number (0-9) keys on the
remote control will pass through. When in Off, those operate as
TV programme selection keys.
a In the REGZA-LINK Setup menu, press b to highlight
Position Key Pass Through and press OK.
b Press B or b to select the appropriate HDMI mode.
c Press C or c to select On.
If a REGZA-LINK device with HDMI switching capability (e.g. AV
amplifier) is connected to the HDMI input, you can select another
REGZA-LINK device that is connected to the master HDMI device
on the input source list.
a Press o and a list will appear on screen showing
available input sources.
b Press b to select the desired input source with
REGZA-LINK icon.
c Press c and a second selection screen will appear
showing all connected REGZA-LINK equipment.
d Press B or b to select the desired input source, and
then press OK.
NOTE:
• These functions depend on the device connected.
• If you select the REGZA-LINK input source from the popup
window, some REGZA-LINK devices may automatically turn
on.
• When the television is switched on it will take a few minutes
for the REGZA-LINK icon to appear in the list. When an HDMI
cable is removed, it will take a few minutes for the icon to
disappear.
• If the HDMI cable from connected equipment is changed,
Enable REGZA-LINK in the REGZA-LINK Setup menu may
need to be reset to On.
• If you change the HDMI lead to a connected device or
change an HDMI device setting, reset the Enable REGZA-
LINK item on the REGZA-LINK Setup menu from Off to On.
Auto Standby
Amplifier Control
Initial Speaker Setting
Position Key Pass Through
REGZA-LINK input source selection
Inputs
TV
1
2
3
HDMI 2
HDMI 1
PC
HDMI 3
HDMI 4
1 DVD
2 VCR/DVR
3 CBL/SAT
4 GAME/TV
5 AUX
REGZA-LINK