Manual

input.
"lb turn on the SRS 3D surround:
1. Select STEREO mode (see "Selecting stereo/SAP broadcasts" on
page 44).
2. Press MENU, and then press _I or • until the THEATER menu
appears.
3. Press • or • to highlight SRS 3D.
4. Press _I or • to highlight ON.
@@@©@@
THEATER
"lb turn off the SRS 3D surround:
Highlight OFF in step 4 above.
In general, you can leave your TV in ON mode because it will
automatically produce the type of sound being broadcast
(surround stereo or monaural).
Adjusting the sound quality
You can change the quality of your TV's sound by adjusting the bass,
treble, and balance.
% adjust the sound quality:
1. Press MENU, and then press _I or • until the AUDIO menu
appears.
2. Press • or • to highlight the item to adjust.
@@@@@@
AUDIO
BALANCE 0
RESET )
v
CIULUIIli_71LIt_CIIly LUltI_U UII [0_ /JC]_ "_uJ.
/f the broadcast is monaura/, the SRS 3D
effectdoes"not work.
®®
® ®
MENU
3. Press _I or • to adjust the level.
• _I makes the sound quality weaker or decreases the balance in the
right channel, depending on the item selected.
• • makes the sound quality stronger or decreases the balance in
the left channel, depending on the item selected.
45