Manual
Using the StableSound *_feature
When the signal source is changed, the StableSound ®feature limits
the high volume level to prevent extreme changes in volume (for
example, to prevent the sudden increase in volume that often happens
when a TV program switches to a commercial).
_lb turn on the StableSound feature:
1. Press MENU, and then press _ or • until the AUDIO menu
appears.
2. Press • or • to highlight S'rAt_LESOuND.
3. Press _ or • to select ON.
@@@©@@
AUDIO
SBS ON
SBS LEVEL 80
SPEAKERS ON
Selecting the background of the menu display
You can change the background of the menu display by selecting from
two preset types: shaded and solid (gray).
"lb select the background:
1. Press MENU, and then press _I or • until the CUSTOM menu
appears.
2. Press • or • to highlight BACKGROUND.
3. Press _I or • to select either a SHADED or SOLID background.
@@@©@@
CUSTOM
TIMER O0O
CC C
FAVORITE CH1
FAVORI TE CH2 1'
Displaying on-screen information
Press RECALL to display the following information on-screen:
• Antenna mode (when in TV mode)
• Channel number or VIDEO mode selected
• Time (if set)
• Channel label (if set)
• Stereo or SAP audio status
• V-CHIP rating status
• Picture size
STEREO
SAP
TV -- PG L V
LIGHT RECALL POWER
.,Tv
,.,,_CvABLE MUTE TWVIDEO TIMER
® ® @
® ® ®
Note:
When the StableSound '_feature is turned on,
the SRS 3D surround sound feature is"
autornatica/ly turned off (see page 4 5).
LIGHT RECALL POWER
®®
--RECALL
ANT 1
FULL ABCD
9 : 25 CABLE 6