Quick Setup Guide Before using the TV, please read this guide carefully and keep it for future reference.
Copyright statement © 2021 Hisense Group All Rights Reserved. Copyright protected material in this Quick Setup Guide may be owned by Hisense group, its contractors or other third parties. Unless otherwise stated, the exercise of any of the exclusive rights under the copyright laws in relation to the material on this site is not permitted without the consent of the rights owner or as otherwise covered by a statutory license.
This Quick Setup Guide supports the following models: 65C350KU Table of Contents What's in the box ............................................................................................................3 Getting started ................................................................................................................4 Step 1. Attach stand or mount....................................................................................4 Step 2. Connect devices to your TV ......................
Congratulations on the purchase of your Toshiba TV! If you would like to know 'all things Toshiba', contact us using the support info: The model and serial number of the TV is located on the back and/or on one side of the TV. We recommend that you record this if you ever need service. Country Customer Care Center U.S.A • Phone: 1-888-4070396 • Hours of Operation: Monday - Friday: 9 AM to 9 PM EST Saturday - Sunday: 9 AM to 6 PM EST • Service Email: USAservice@toshibavisual.
What's in the box Your Toshiba TV comes with the following items: ● ● ● ● ● TV power cord remote control 2 base stands 1 RCA jack to AV Cable ● ● ● ● Quick Setup Guide (this document) 1 set of AAA batteries Important Safety Information and Warranty Card 4 screws (M5×12) IMPORTANT: To prevent accidentally discarding items that came with your TV, be sure to check ALL of the foam in the carton box. · Please check foam for accessories before discarding.
Getting started Step 1. Attach stand or mount Before you start using your TV, attach your TV stand or mount it on the wall. CAUTION: • Disconnect the AC power cord before installing a stand or a wall mount bracket. • The display on your TV is fragile. Make sure the TV screen is not scratched or damaged by hard objects or from pressure. • After the installation is complete, make sure the TV is steady on a table or firmly attached to a wall mount, before removing all protective film, if any.
Attach the wall mount bracket (not included) Before you begin the third-party manufacturer instructions, be sure to do the following things: Screw (not included) 1. Place the TV face down on a clean, safe and cushioned surface. 2. Remove the TV stand if you have already attached it. 3. Place spacers (not included) in the corresponding bracket holes. Spacer (not included) Bracket (not included) CAUTION: • Follow instructions provided with the wall mount bracket.
Step 2. Connect devices to your TV Check to ensure that you have connected right cables for right ports securely. Loose connections can affect the quality of the picture image and color.
TV label Port Cable External equipment VHF/UHF Antenna ANT/ CABLE ANT OUT Antenna VCR DVD Player/Recorder Red(R) AV IN White(L) Set-top Box Satellite antenna cable Satellite Receiver Yellow(Video) DIGITAL AUDIO OUT Audio Amplifier Connect an outdoor VHF/ UHF antenna. Connect a High Definition Multimedia Interface (HDMI) cable from an external device. HDMI IN Video Camera Brief description Speaker Connect a composite video cable and leftright audio cables from an external AV device.
TV label Port Cable External Equipment Brief Description USB Connect a USB device for browsing photos, music and movies. Hard disks with a total current consumption or impulse current consumption greater than 500mA are not supported. LAN Connect an Ethernet cable to access a network or the Internet. The TV also has a wireless connectivity feature.
Step 3. Get your remote ready The following table shows the buttons on your remote control and describes what they are for. 1 12 1 POWER: Turn your TV on or off 2 Voice button: Holding down the Voice Button activate the microphone 2 3 Select: Confirm a selection or action 3 4 D-pad (up/down/left/right navigation buttons) 5 Back: Return to the previous place in the menu or 4 app 6 REWIND: Rewind streaming video 7 PLAY/PAUSE: Pause or resume playback.
Insert the batteries Remove the battery door and insert the two AAA batteries into your Alexa Voice Remote. Important information about the remote and batteries • Discard batteries in a designated disposal area. Do not throw them into a fire. • Remove old batteries immediately to prevent them from leaking into the battery compartment. • If you do not intend to use the remote control for a long time, then remove the batteries. • Battery chemicals can cause a rash.
Step 4. Power on the TV Connect your power cord to the TV and plug it into a power outlet. Your TV will display a launch screen showing the Toshiba logo. Power Cord Wall Outlet Step 5. Complete the first-time setup The first time you turn on your TV, there is a guided setup to make it easy to connect your TV to the Internet and complete the setup of your TV. Your TV will automatically pair with your new Alexa Voice Remote. 1.
Troubleshooting If you are having trouble with your TV, first try turning it off and on again. If this does not fix the problem, check the tips in the following table. If your problem is not listed in the following table, then contact us at one of the phone numbers on Page 2. Issues Possible solutions No sound or picture • Check if the power cord is plugged into a powered AC outlet. • Press the Power button on the remote control to activate the unit from 'Standby' mode.
Product Specifications Model Name Dimension (W × H × D) Weight 65C350KU Without Stand 57.2 × 32.8 × 2.9 inches (1452 × 834 × 74 mm) With Stand 57.2 × 35.2 × 12.1 inches (1452 × 894 × 307 mm) Without Stand 36.2 lbs (16.4 kg) With Stand 37.0 lbs (16.8 kg) TV Stand Width(W × D) 46.7 × 12.1 inches (1186 × 307 mm) Class 65" Active Screen Size (Diagonal) 64.5 inches (163.
Certification and Compliance FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. Dolby, Dolby Vision, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 1992–2020 Dolby Laboratories. All rights reserved. For DTS patents, see http://patents.dts.com.
AMAZON TERMS & POLICIES Before using Fire TV Edition, please read the terms located at www.amazon.com/ deviceservices/support. Please also read all terms and policies for services related to Fire TV Edition, including but not limited to Amazon’s Privacy Notice located at www. amazon.com/privacy, Amazon’s Conditions of Use located at www.amazon.com/ conditionsofuse, and any other terms or usage provisions available at www.amazon. com/deviceservices/support.
