Manual

Connecting a DTV receiver/set-top box with
ColorStream "; (component video) and a VCR
This connection allows you to watch DTV (digital TV broadcast),
VCR, and TV programs, and record DTV and TV programs. You can
record from one source while watching a program from another
source.
Your TV has ColorStream _ (component video) inputs. Connecting
your TV to a DTV receiver with component video can greatly
enhance picture quality and realism.
You will need:
• three coaxial cables
• two sets of standard A/V cables
• one set of component video cables
• one pair of standard audio cables
Stereo VCR
From
Antenna
TV
From
DTV Antenna
Note."
For the highest possJblepicture quality,use
component videocables Cota DVI D &gita/
single link cable) between the TVand DTV
receivet_
Youcan connect component videocables
from theDTVreceiver to either ColorStream
jack on the TV(HD1 or HD2)
TheColorStream HD 1and HD2 jacks canbe
used with ProgressiveC480p)and Intedaced
_48&: 7080_)scan systems
ff your DTVreceiver is not compatible
with component video _ofDVI/HDCP), use
an S videocable (plus thestandard audio
cables) instead
Do not connect both S Videoand standard
wdeocables betweee the TVaed DTV
receiverat the same g/me,or thepicture
performance willbe unacceptable
Torecord fibre the DTVreceiver, set the VCR
to Line IN Tomonitor recer&ng from the DTV
receiver,set the VCRto Line IN, and set the
TVto Video I
The unauthorizedrecording,use, distribution, I
orrevisionof television programs,videotapes, I
DVDs, andother materials is prohibitedunder I
the CopyrightLawsof the UnitedStatesand I
othercountries,and maysubjectyouto civil I
andcriminal liability. I
DTV receiver with component video