Manual

Adjusting the color convergence
This projection TV uses three separate TV tubes: red, green, and blue.
The red, green, and blue images are projected onto the screen where
they converge to form a full-color picture. You carl see a dear picture
only when the three images converge correctly. Convergence may drift
over time or if you move the TV. lfyou can see clear images on your
TV screen, skip this procedure.
This adjustment should be made only after the TV has been on for at
least 30 minutes.
Automatically adjusting the color convergence using
Touch Focus rM
Press Touc:_Focus on the TV once. The TV will enter the auto
convergence mode and correctly adjust convergence
automaticall>
TOOTH FOCUS
TOUCH FOCUS F_N_SqED
"--_ '<..........B R HorizontaIG
_'_ _ Vertical
When the adjustment is complete, the normal picture will
reappear.
If the error message "Touch Focus Error" appears, retry the
TOUCHFOCUSadjustment or adjust the convergence manually, as
described below.
MENU • I_V& TOUCHFOCUS
Manually adjusting the color convergence
To check and adjust tile color convergence manually:
1. Press MENU, and then press • or • until the PICTURE menu
appears.
2. Press • or • to highlight CONVERGENCE.
_PICTURE ANTENNA
MODE SPORTS
FLESH TONE ON
CaMeClearDNR OFF
SVM H_GH
COLOR