Manual

Using the LOCKS menu

The LOCKS menu includes the V-Chip, CH Lock, Video Lock, and

New PIN Code functions. You can use these functions after entering

the correct PIN code.

Entering the PIN code

1. Press MENU, and then press • or • until the LOCKS menu

appears.

v CH_P

ENABLE BLOCKING OFF

TV RATING

MpAARATING

BLOCKING OPTION

CH LOCK

V_DEO LO K OFF

FRONT pA_I_E_L LOCK OFF

NEW P_N CODE

2. Press • or • to display the PIN code entering mode.

• Blocking Reset status: • When the PIN code is already stored:

Set your 4-digit code by pressing Pressthe Number buttons (0-9) to enter

the Number buttons (0-9), and the 4-dlgk PIN code used for blocking

then press ENTER. channels, and then press ENTER.

Note:

The¼Chip function isavai/ab/eonlyfor the

LZS_¼Chip system TheCanadian¼Chip

systemis hogsupported

-- Number

¢®e

_ -- MENU/ENTER

8L_GNI NG E •

_LOOKS

If the wrong PIN code is entered, the message "Incorrect"

appears. Enter the code again, and then press ENTER.

Continue to set each item following the steps on the next page.

If you cannot remember your PIN code

While in the PIN code entering mode, press the RECALL button

four times within five seconds. The PIN code will be released

(blocking reset status restored).