Manual

Tounlockachannel:
1. FromtheLOCKSmenu,selectCHLOCK.
2. Press• or• todisplaytheCHLOCK menu.
3. Press _.V• • to highlight the channel you want to unlock, then
press ENTER.
_LOCKS
V CHIP
ENABLE BLOCK]NG ON
TV RATING
MPAA RATENG
VIDEO LOCK 12 18 0
FRORT PANEL LOOK 3a 0
NEW PiN CODE 0 0 0
TM (_ABL E
CLEAR ALL _ !
_LOCKS
V CHIP
ENABLE BLOCKENG ON
TV RATING
MpAARAT_NG
CLEAR ALL _!i
4. Repeat step 3 for other channels.
To unlock all locked channels at once:
Highlight CLEAR ALL in step 3 above, and then press • or •.
N
_LOCK8
V CH_P
ENABLE BLOCKING ON
TV RATING
MPAA RATING
VIDEO LOCK 0 0
FRONT PANEL LOOK 0 0
NEW PIN CODE
Locking video inputs
With the VIDE() LOCK feature, you can lock out the input sources
(Video 1, Video 2, Video 3, ColorStream HD1, ColorStream HD2,
DVI/HDCP) and channels 3 and 4.
You will not be able to select the input sources with the TV/V1DEO
button or Channel buttons unless you clear the setting.
To set up the video lock:
1. From the LOCKS menu, select VIDEO LOCK.
2. Press • or • to highlight the level of video locking you want
(Video, Video+, or Off), as follows:
VIDEO : Locks Video 1, Video 2, Video 3, ColorStream
HD1/HD2, and DVI/HDCP.
VIDEO+ : Locks Video 1, Video 2, Video 3, ColorStream
HD1/HD2, DVI/HDCI and channels 3 and 4.
Select VIDE()+ if you use the antenna terminal
to play a video tape.
OFF : Unlocks all video input sources.
@@@@®@
LOCKS
V CHIP
ENABLE BLOCKING ON
TV RAT_ NG _
MPAA RAT1 NG
BLOC}< _ NG OPT_ ON _
C_ LOGK
FRONT PANEK LOON _ OFF
NEW PIN CODE
44