- TOSHIBA Satellite A10 Series Portable Personal Computer User's Manual
Table Of Contents
- Personal Computer
- Table of Contents
- Preface
- General Precautions
- Chapters
- Chapter 1 Introduction
- Chapter 2 The Grand Tour
- Chapter 3 Getting Started
- Chapter 4 Operating Basics
- Chapter 5 The Keyboard
- Chapter 6 Power and Power-Up Modes
- Chapter 7 HW Setup and Passwords
- Chapter 8 Optional Devices
- Chapter 9 Troubleshooting
- Appendixes
- Glossary
- Index
7-5
HW S
ETUP
AND
P
ASSWORDS
Parallel/Printer
Some models are equipped with Parallel/Printer tab. This tab lets you set the Parallel
Port Mode. Use the Windows Device Manager to make settings for the Parallel port.
Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
ECP Sets the port type to Extended Capabilities Port (ECP). For
most printers, the port should be set to ECP. (Default)
Standard This setting should be used with some other parallel
Bi-directional devices.
Display
This tab lets you customize your computer’s display settings for either the internal
LCD screen or for an external monitor.
Power On Display
Lets you use the display to be used when the computer is booted. (This setting is
only available on Standard VGA mode and not available on Windows Desktop)
Auto-Selected Selects an external monitor if one is connected. Other-
wise, it selects the internal LCD. (Default)
LCD + AnalogRGB Selects both the internal LCD and external monitor for
simultaneous display.
CPU
Celeron models are not equipped with CPU tab.
This function lets you set the CPU operating mode.
HW Setup