Datasheet
TOSHIBA TELECOM Mod 13 GS35F0099L
RSIU1A Serial Interface Unit (expandable) for DK424i.
1 per system provides 1 to 4 RS-232 serial ports for SMDI, MIS, SMDR call
acct. PC, DKi Admin/DKiBackup PC or maint. terminal, ext. modem, or CTI
PC. RSIU std. with 1 RS-232 port. Accepts up to 3 RSIS subassemblies, or 2
RSIS and 1 RMDS modem subassembly.
239.
RSSU1A Serial Port Interface Unit (1-port) for DK40i or DK424i
Provides 1 RS-232 interface to local terminal, external modem, SMDI, or MIS
oprocessor.
150.
RSTS1A 2-circuit Standard Telephone Interface Subassembly.
1 per RDSU. The RSTS attaches to the RDSU to provide 2 additional
standard station ports.
155.
RSTU3A 8-circuit Standard Telephone Interface Unit with MW.
Provides 8 standard telephone station ports. 1 port per DTMF or rotary
telephone, or peripheral device such as Voice Mail, Auto Attendant, fax, etc.
1 port per off-premises station, type OL13B line.
510.
RUDTU2 Firmware Upgrade Kit for RDTU1 T1(DID Hookflash).
Required to upgrade the RDTU1 T1 interface for the DID and ground start
hookswitch flash capability.
86.
RUPTU2 Firmware Upgrade Kit for RPTU1 PRI (Qsig networking).
Required to upgrade the RPTU1 PRI interface for StrataNet QSIG
networking using DS-1 circuits.
86.
RURA4.3 R4.3 Upgrade Kit for DK424 RCTUA3 or RCTUA4.
Use 1 kit to upgrade RCTUA3A or RCTU4A to Release 4.3 software.
Instructions included. Release 3.x or R4.x ROMs can be returned for $100
credit.
91.
RURB4.3 R4.3 Upgrade Kit for DK424 RCTUBA3/BB.
Use 1 kit to upgrade RCTUBA/BB3 or RCTUBA/BB4 to Release 4.3
software. Instructions included.
182.
RURD4.3 R4.3 Upgrade Kit for DK424 RCTUC3/D.
Use 1 kit to upgrade RCTUC/D3 or RCTUC/D4 to Release 4.3 software.
Instructions included.
272.
RURF4.3 R4.3 Upgrade Kit for RCTUE3/F.
Use 1 kit to upgrade RCTUE/F3 or RCTUE/F4 to Release 4.3 software.
Instructions included.
726.
RWBF1A Wall Brackets (1 pair).
Used with floor mounting to secure cabinets to wall. 3 pairs included in BFIF
for up to 6 cabinets.
10.
SCA508 Link 150 M3 MCU 8-port Analog Interface. For use with analog line interfaces. See note 1.
1,638.
SCA516 Link 150 M3 MCU 16-port Analog Interface. For use with analog line interfaces. See note 1.
2,233.
SCB508 Link 150 M3 MCU 8-port Executone Digital Interface. For use with Executone IDS PBXs. See note 1.
1,935.
SCB516 Link 150 M3 MCU 16-port Executone Digital Interface. For use with Executone IDS PBXs. See note 1.
2,532.
SCD508 Link 150 M3 MCU 8-port Toshiba and Universal Digital In
Supports Toshiba, Comdial, Fujitsu, Inter-Tel, Lucent 2-wire, NEC, Nortel
Norstar, and Siemens PBXs. Check with SpectraLink for specific
make/model compatibility. See note 1.
1,638.
SCD516 Link 150 M3 MCU 16-port Toshiba and Universal Digital I
Supports Toshiba, Comdial, Fujitsu, Inter-Tel, Lucent 2-wire, NEC, Nortel
Norstar, and Siemens PBXs. Check with SpectraLink for specific
make/model compatibility. See note 1.
2,233.
SCF508 Link 150 M3 MCU 8-port 4-wire Universal Digital Interfa Supports 4-wire Lucent Definity and Merlin PBXs. See note 1.
1,638.
SCF516 Link 150 M3 MCU 16-port 4-wire Universal Digital Interf Supports 4-wire Lucent Definity and Merlin PBXs. See note 1.
2,233.
SCN508 Link 150 M3 MCU 8-port Nortel Meridian 1 and Universal
Supports Toshiba, Nortel Meridian 1 and Norstar, Comdial, Fujitsu, Inter-Tel,
Lucent 2-wire, NEC, and Siemens PBXs. Check with SpectraLink for specific
make/model compatibility. See note 1.
2,051.
bgoodwin Page 69 9/30/2004