Datasheet

TOSHIBA TELECOM Mod 13 GS35F0099L
JPI300 Inter-shelf Junction Panel.
Required to connect Expansion Shelves to System Controller. Converts
RJ21 connections on System Controller to RJ45 connections on Shelf
Controllers. Each Junction Panel supports 19 shelves and has 4 RJ21
System Controller connections.
295.
K5RCU2A 5-circuit DTMF Receiver/Busy Tone Detector for DK40i.
1 per system required for connection of DTMF standard telephones, DISA
lines, and voice mail devices. Also provides busy tone detection for ABR.
The K5RCU2 mounts in the Base KSU.
120.
KCDU1A 2-CO Line/4-Digital Telephone Interface Unit for DK40i.
Provides 2 CO line circuits and 4 digital telephone circuits. Maximum 4
KCDU per system.
142.
KEYPRINT 2000 Keystrip Printing Software Package.
For automated printing of 2000-series DKT, DDSS, and DADM keystrips.
Runs on IBM-compatible DOS PC. User Guide included.
86.
KKYS1A Auto Attendant (built-in) Feature Option Key for DK40i.
1 per system for the Auto Attendant option. Installs on the K5RCU2 in the
Base KSU. Requires K5RCU2, external digital announcers and standard
ports.
116.
KKYS2A ACD Feature Option Key for DK40i.
Requires software R4.3 or higher. 1 per system for ACD option without MIS.
Also includes Auto Attendant. Requires and installs into the K5RCU2 in the
Base KSU.
385.
KKYS3A ACD/MIS Feature Option Key for DK40i.
Requires software R4.3 or higher. 1 per system for MIS options. Also
includes ACD and Auto Attendant. Requires/installs into K5RCU2 in Base
KSU. Requires TSIU. Same price as KKYS2 if purchased with SMIS, Insight
DK, or Call Center Viewer. See note 3.
814.
KSTU2A 4-circuit Standard Telephone Interface Unit for DK40i.
Provides 4 standard telephone station ports. 1 port per DTMF or rotary
phone, or peripheral device such as Voice Mail, Auto Attendant, fax,
separate BGM source interface, etc. 1 port per off-premises station. Mounts
in Base KSU. Max. 1 KSTU2 per system.
176.
LIC100-4 DTMF 4-port DTMF Receiver License for CTX100.
Required for activation of 4 DTMF receiver ports number 5 and above on
CTX100 system. Maximum 16 DTMF receiver ports per system.
120.
LIC100-4 PORTS 4-port CO Line/Station License for CTX100.
Required for every 4 ports used for CO lines or stations beyond the 32 ports
bundled with the CTX100 processor.
64.
LIC100-QSIG NET CTX100 Strata® Net QSIG Networking Application License.
One per CTX100 node required to network multiple CTX systems using
Strata® Net QSIG networking.
857.
LIC100S-8 PORTS 8-port Line/Station License CTX100S (17-24/25-32 Ports)
Required for CO Line/Station Ports 17-24 and 25-32 on a ACTU2A-S
processor.
536.
LIC100-SER PORT CTX100 Serial Port License required for BSIS Ports 2~4
Required to activate serial port 2~4 in Strata CTX100 (license for serial port 1
included with BSIS).
60.
LIC670-4 DTMF 4-port DTMF Receiver License for CTX670.
Required for activation of 4 DTMF receiver ports number 5 and above on
CTX670 system. Maximum 32 DTMF receiver ports per system.
124.
LIC670-4 PORTS 4-port CO Line/Station License for CTX670.
Required for every 4 ports used for CO lines or stations beyond the 64 ports
bundled with the CTX670 processor.
64.
bgoodwin Page 59 9/30/2004