Datasheet

TOSHIBA TELECOM Mod 13 GS35F0099L
QPS100A Power Supply for Dual Charging Stand or Quick Charger.
Required forDual Charging Stand (PTC400), Quick Charger (PTQ360), and
MOG600.
4.
QPS200A Power Supply for NetLink i640 Gang Charger Power Supply for NetLink i640 Gang Charger (GCX100) - North America
15.
QPSU8A2 Power Supply for DK14 KSU. Used for replacement or spares.
116.
QRCU3A 3-circuit DTMF Receiver/ABR Detector for DK14.
1 per system required for connection of DTMF standard telephones, Direct
Inward System Access (DISA) lines, and voice mail devices. Also provides
busy tone detection for ABR. The QRCU3 mounts inside the KSU.
90.
QSTU2A 2-circuit Standard Telephone Interface Unit for DK14.
Provides 2 standard station ports. 1 port per DTMF or rotary telephone, or
peripheral device such as Voice Mail, Auto Attendant, fax, separate BGM
source interface, etc. 1 port per off-premises station. Mounts inside the KSU.
Maximum 1 QSTU2 per system.
155.
R40S1A Local ISDN PS1 Power Supply Provides local power for one ISDN device.
163.
R48S1A 48 Volt Subassembly - Mounts on RSTU2 or RDSU.
1 per RSTU or RDSU. Required for use of OL13C OPS lines (instead of
OL13B).
56.
RATHC1A(W) DK PC Attendant Console Handset & Cradle - Ash White. Used for replacements or spares.
103.
RATI1A(W) DK PC Attendant Console Interface Unit - Ash White. Used for replacements or spares.
771.
RATU1A 4-circuit DK424i Attendant Console Interface Unit. 1 per 4 Attendant Consoles.
501.
RBDB2A Battery Distribution Box for DK424.
1 per system required when 3 to 7 cabinets are connected to reserve
batteries. Includes 6 Power Supply to RBDB2 cables (5 ft).
290.
RBSS1A 2-circuit ISDN S/T-type Basic Rate Interface Sub.
Attaches to the RBSU to provide 2 additional BRI S/T interfaces that can be
used for station side ISDN connections only. Requires R4.1 or higher and 1
Ferrite Core for each BRI line connected to the RBSS.
239.
RBSU1A 2-circuit ISDN S/T-type Basic Rate Interface Unit.
Provides 2 BRI S/T (4-wire) interfaces for network or station side ISDN.
Accepts RBSS 2-port subassembly. BRI S/T network connections require
external NT-1 for each BRI line. Requires R4.1 or higher and 1 Ferrite Core
for each BRI line connected to RBSU.
433.
RBTC1A-2M Reserve Power Cable 6.5 ft. (DK424 RBDB2 to Battery Ter
Cable used to connect reserve batteries to DK424 RBDB2A battery
distribution box. 2 cables per DK424 system required when connecting 3 or
more cabinets to reserve batteries.
56.
RBTC2A-1.5M Reserve Power Cable, DK424 Cabinet Power Supply to RBDB For replacement or spare cable. See RBDB2A.
14.
RBUS1A 2-circuit ISDN U-type Basic Rate Interface Subassembly.
Attaches to the RBUU to provide 2 additional BRI U interfaces that can be
used for network- or station-side ISDN connections. Requires R4.3 or higher
and 1 Ferrite Core for each BRI line connected to the RBUS.
265.
RBUU1A 2-circuit ISDN U-type Basic Rate Interface Unit.
Provides 2 BRI U (2-wire) interfaces that can be used for network- or station-
side ISDN connections. The RBUU has connectors for a 2-port add-on
subassembly. Requires Rel. 4.3 or higher and 1 Ferrite Core for each BRI
line connected to RBUU.
471.
bgoodwin Page 65 9/30/2004