Datasheet

TOSHIBA TELECOM Mod 13 GS35F0099L
RC7C1A-1.7M Cable Set for DK424 7th Cabinet.
1 for 7th Cabinet connection of power supply to RBDB2A for reserve power.
Includes data cable between Base Cabinet and 7th Cabinet.
32.
RCC400 Standard Base Station.
For use with Link 150 and Link 3000 systems. Includes ceiling clip for
attachment to drop ceiling rails.
966.
RCC410 Link 150 Standard Base Station.
For use with Link 150 MCUs only. Includes ceiling clip for attachment to drop
ceiling rails.
667.
RCCB1A Floor Mount Conduit Connection Box (3 to 6 Cabinets).
Required for AC and battery connection when 3 to 6 cabinets are floor
mounted. Not required for wall mounting.
127.
RCCB2A Floor Mount Conduit Connection Box (4 to 7 Cabinets).
Required for AC and battery connection when 3 to 7 cabinets are floor
mounted. Not required for wall mounting.
272.
RCH400 Link 3000 Base Station.
For use with Link 3000 MCUs only. Includes ceiling clip for attachment to
drop ceiling rails.
966.
RCIS1A 4-circuit Caller ID Interface Subassembly.
1 per RCIU2. The RCIS installs piggyback onto the RCIU2 to provide an
additional 4 Caller ID circuits, totaling 8 per slot.
172.
RCIU2A 4-circuit Caller ID Interface Unit (8 with RCIS).
1 RCIU2 for each 4 loop start lines on RCOU/RCOS or each 4 ground/loop
start lines on RGLU to provide Caller ID. The RCIU2 accepts the RCIS
subassembly.
248.
RCMS1A 2-circuit E911 CAMA Interface Subassembly.
Attaches to the RMCU to provide 2 CAMA trunk circuits. Maximum 2 RCMS
subassemblies per RMCU card. Requires R4.3 or higher software.
244.
RCO400 Outdoor Base Station.
For use with Link 150 and Link 3000 systems in outdoor Base Station
installations. Includes RCC400 with extended operating temperature range,
weather-resistant enclosure, and mounting hardware.
1,336.
RCO410 Link 150 Outdoor Base Station.
For use with Link 150 MCUs only. Intended for outdoor Base Station
installations. Includes RCC410 with extended operating temperature range,
weather-resistant enclosure, and mounting hardware.
1,036.
RCOS3A 4-circuit analog Loop Start CO Line Subassembly
1 per RCOU. The RCOS attaches to the RCOU to provide 4 additional loop
start CO/PBX/Centrex line circuits.
196.
RCOU3A 4-circuit analog Loop Start CO Line Interface Unit
Provides 4 CO/PBX/Centrex loop start line circuits. Accepts RCOS
subassembly.
227.
RCTC1A DK424 Remote Cabinet Top Cover. As desired for DK424 remote expansion cabinets.
59.
RCTUA4A DK424 Small System Common Control Unit. 1 per system. Does not support Expansion Cabinets or Attendant Consoles.
531.
RCTUBA3A DK424 Medium System Common Control Main Unit.
1 per system. Supports Base Cabinet, 1 Expansion Cabinet, and advanced
DK424 features. Requires RCTUBB3 or RCTUBB4A.
732.
RCTUBB4A DK424 Medium System Common Control Sub Unit. 1 per RCTUBA3 required.
599.
RCTUC3A DK424 Large System Common Control Main Unit.
Used for spares or replacement. Supports Base Cabinet and 1 to 5
Expansion Cabinets.
2,088.
RCTUD4A DK424 Large System Common Control Sub Unit. Used for spares or replacement. 1 per RCTUC4A required.
1,711.
bgoodwin Page 66 9/30/2004