Datasheet

TOSHIBA TELECOM Mod 13 GS35F0099L
RJ-DP48C ONEAC RJ48C Digital Line Protector(2 pr,4 wire) modular
Use for T1, T2, and ISDN PRI (2-pair) RJ48 connected (in/out) as required
for lightning protection.
39.
RJ-DSP10E ONEAC Data Line Protector (2 pr,4 wire) modular. Use for 10BaseT Ethernet as required for lightning protection.
31.
RKYS1A Auto Attendant (built-in) Feature Option Key for DK424i
1 per system for use of Auto Attendant option. Attaches to processor PCB.
Requires BRCS, external digital announcer(s), and standard port(s).
155.
RKYS2A ACD Feature Option Key for DK424i.
1 per system for use of ACD option without MIS. Also includes Auto
Attendant. Attaches to processor PCB. Requires BRCS, external digital
announcer(s), and standard port(s).
857.
RKYS3A ACD/MIS Feature Option Key for DK424i.
1 per system for use of MIS option. Also includes ACD and Auto Attendant.
Attaches to processor PCB. Requires PIOU, PIOUS, RSSU, or RSIU for
interface. Same price as RKYS2 if purchased with SMIS, Insight products, or
Call Center Viewer. See note 2.
1,713.
RMCU1A Enhanced 911CAMA Trunk Interface Unit (requires 1 or 2
Requires 1 or 2 RMCS subassemblies to provide 2 or 4 CAMA trunk circuits.
Requires R4.3 or higher software.
257.
RMDS1A Remote Maintenance 2,400 bps Modem Subassembly (mounts
1 per system to provide a 1,200/2,400 BPS modem. Mounts piggyback onto
the RSIU.
129.
RPCI-DI Integrated PC Data Interface Unit for 2000-series DKT.
Installs as base of DKT. Shares the station port of the integral DKT. Includes
7 ft. modular 4-wire cord. Includes StrataLink TAPI software disk.
189.
RPCI-DI(W) Integrated PC Data Interface Unit for 2000-series DK.
Installs as base of DKT. Shares the station port of the integral DKT. Includes
7 ft. modular 4-wire cord. Includes StrataLink TAPI software disk.
189.
RPRI-CBL-KIT ISDN PRI Cable Kit with Ferrite Core. 1 required for each BPTU or RPTU PRI interface.
64.
RPSB1A 3 Outlet AC Power Strip Box (Standard Cord).
1 required with 3 or 4 DK424 Base/Expansion Cabinets. 2 required with 5, 6,
or 7 cabinets.
55.
RPSB2A 3-Outlet AC Power Strip Box (Standard 120VAC Cord).
1 required with 2 or 3 Base/Expansion Cabinets when one 120 VAC power
cord from system is allowed. 1 req. with 3 or 4 Base/Exp. Cabinets when 2
120 VAC power cords are allowed. 2 required with 5 Base/Exp. Cabinets
when 2 120 VAC power cords are allowed.
77.
RPSU424A Power Supply for DK424 Base/Expansion Cabinet. Used for spares or replacement.
318.
RPTU2A ISDN Primary Rate Interface Unit.
Provides 23 channels for ISDN PRI service on CTX670, CTX100 or DK424i,
and 12 channels for DK40i (requires R4.3). Strata® Net CTX network
connection using RPTU2A PRI interface always requires an external CSU.
Requires RPRI-CBL-KIT.
1,413.
RRCU1A Remote Cabinet Interface Unit.
1 required in the master location and 1 in the slave location for each remote
site. 1 pair supports up to 2 Expansion Cabinets at the remote location.
1,268.
RSIS1A Serial Interface Subassembly Unit (mounts on RSIU) for 1 per additional RS-232 port. Maximum of 3 can fit onto the RSIU.
86.
bgoodwin Page 68 9/30/2004