Datasheet

TOSHIBA TELECOM Mod 13 GS35F0099L
SYS-PS-SYSTEM-1 Spare Power Supply As needed for ACD-CT2-PRO, ATT-CT2-PRO, and SES-8-PRO
42.
SYS-PS-SYSTEM-2 Spare Power Supply As needed for CS-Server 4PCI, SES-48-PRO, and ACD-CT4-SVR
146.
SYS-PS-SYSTEM-3 Spare Power Supply As needed for CS-Server 8PCI and SES-96R2
154.
SYS-PS-SYSTEM-4 Spare Power Supply As needed for CS-Server 16PCI
516.
SYS-RAID1-SYS 2 RAID 1 kit for Strata CS Server 4PCI
Kit iIncludes FastrakTX2000 RAID card, two Seagate ST380011A 80
gigabyte ATA hard drives, and SuperSwap 1000 drive enclosures. Can also
be used with system models ACD-CT4-SVR and SES-48-PRO.
768.
SYS-RAID5-SYS34 RAID 5 kit for Strata CS Server 8PCI and Server 16PCI
Kit includes MegaRaid SCSI 320-1 Single Channel U320 RAID card, three
Seagate ST336607LC 36 gigabyte SCSI hard drives, BR-SCA23 Drive
cannister
2,132.
TBSU1A 2-Circuit ISDN S/T Type Basic Rate Interface Unit.
Provides 2 BRI S/T (4-wire) interfaces for network or station side ISDN
connections. BRI S/T network connections require an external NT-1 device
for each BRI line and 1 Ferrite Core for each BRI line connected to the
TBSU.
415.
TBUU1A 2-Circuit ISDN U Type Basic Rate Interface Unit.
Req software R4.3 or higher. Provides 2 BRI U (2-wire) interfaces that can
be used for network or station side ISDN. Requires 1 Ferrite Core for each
BRI line connected to the TBUU. Only 1 of following can be mounted in Base
KSU TCOU, TDDU, TBSU, or TBUU.
450.
TCIU2A 4-circuit Caller ID Interface Unit for DK40i.
Enables 4 loop start lines on TCOU for Caller ID. Mounts piggyback onto the
TCOU in the Base cabinet. Maximum 1 per system.
205.
TCOU1A 4-circuit Loop Start Line Interface Unit for DK40i.
Provides 4 loop start CO/PBX/Centrex line circuits. Mounts in the Base KSU.
Maximum 1 per system. Only 1 of the following can be mounted in the Base
KSU: TCOU, TDDU, TBUU, or a TBSU.
146.
TDDU1A 4-circuit DID Line Interface Unit for DK40i.
Provides 4 DID line circuits. Mounts in the Base cabinet. Maximum 1 per
system. Only 1 of the following can be mounted in the Base KSU: TCOU,
TDDU, TBUU, or a TBSU.
420.
TGA116 NetLink Telephony Gateway 16-port Analog Interface. For use with analog line interfaces.
2,947.
TGB116 NetLink Telephony Gateway 16-port Executone IDS. For use with Executone IDS PBXs.
2,947.
TGD116 NetLink Telephony Gateway 16-port Toshiba.
Supports Toshiba, Comdial, Fujitsu, Inter-Tel, Lucent 2-wire, NEC, Nortel
Norstar, Siemens PBXs. Check with SpectraLink for specific make/model
compatibility.
2,947.
TGF116 NetLink Telephony Gateway 16-port 4-wire Digital Inter. Supports 4-wire Lucent Definity and Merlin PBXs.
2,947.
TGN116 NetLink Telephony Gateway 16-port Nortel.
Supports Toshiba, Nortel Meridian 1 and Norstar, Comdial, Fujitsu, Inter-Tel,
Lucent 2-wire, NEC, and Siemens PBXs. Check with SpectraLink for specific
make/model compatibility.
3,318.
TGP116 NetLink Telephony Gateway 16-port Panasonic DBS. For use with Panasonic DBS PBXs.
2,947.
TGX116 NetLink Telephony Gateway 16-port Mitel . For use with Mitel SX-series PBXs.
2,947.
TPS100A Power Supply for TGx116, MOG7xx, and SVP100 . For NetLink telephony gateway interfaces.
34.
TPSU16A Power Supply for Strata DK40i Base KSU. Used for replacement or spares for DK40i, DK40, and DK16e.
244.
bgoodwin Page 78 9/30/2004