user manual

– 82 –
CN51
CN40
SW01
Remote controller
Indoor control
P.C. board
TCC-LINK
communication circuit
Terminal
resistance
TCC-LINK adapter P.C. board
MCC-1440
Indoor unit
TCC-LINK
Communication units:
Total 64 units
Communication distance:
2km
CN050
CN041
Terminal block
(A, B)
Central
controller
Cutting off portion
(Shaded area)
After cutting off the slit of bell mouth on the unit,
clear up the surface of the slit that there is no burr
on the cutting edge.
Connection Interface Kit
Cross slot screw
11-2. Setup at Local Site / Others
Model name: TCB-PCNT30TLE2 and TCB-PX30MUE
11-2-1. TCC-LINK Adapter (For TCC-LINK Central Control)
1. Function
This model is an optional P.C. board to connect the indoor unit to TCC-LINK (Central controller).
2. Microprocessor Block Diagram
3. Installation Procedure
1) Cut off the slit of bell mouth on the Air Conditioner unit (RAV-SM✻✻✻MUT-E) with nipper or a cutter for
attaching the Connection Interface Kit.
2) Attach the Connection Interface Kit (TCB-PX30MUE) on the
Air Conditioner unit (RAV-SM✻✻✻MUT-E).
After insert the hook of the unit to the Connection Interface
Kit hole, and then tighten a Cross slot screw (4 × 14).