Manual
61
English
Frequently Asked Questions
Q
+.
A
Check that the television is on and that
all connections are made properly.
Q
0
.
A
The colour is factory set to Auto to auto-
matically display the best colour system.
When using an external source, if there
is little or no colour, improvements may
sometimes be achieved.
02
With the external source playing, select
Manual setting in the SETUP menu.
Auto,
NTSC 4.43, NTSC 3.58, SECAM or
PAL.
Manual setting
EXT 1
Colour system: Auto
A
Back
RETURN
Select Change Save
OK
Q
+)34
.
A
Make sure the VCR or DVD player is
connected to the television, then select
the correct input by pressing
.
Q
+
.
A
Check all cable connections and that
the volume has not been turned down or
that the sound has not been muted.
Q
+.
A
Interference or a weak signal. Try a
tuning may help:
Select the ATV Manual Tuning in the
SETUP menu.
Highlight the station and press
, then
tuning.
ATV Manual Tuning
Manual fine tuning
1 BG P C69 0
−−−−−
Back
RETURN
Select Change Save
OK
picture and sound. Press
and then
RETURN.
Q
+)$.
A
Check that the batteries aren’t dead or
inserted incorrectly.
Q
+5.
A
Good performance of text depends on
a strong broadcast signal. If the text is
unreadable or garbled, check the aerial,
satellite or cable connection. Go to the
main index page of the text service and
look for the User Guide. This will explain
the basic operation of text in some
detail.
Q
+5
5.
A
Text has been selected while viewing
an external source. No text will appear
on-screen or a box may appear stating
no information is available. Select a
broadcasting channel and press
to
access.