Printer User Manual

- 132 -
6.3.14 Issue Command [ESC] XS
Function Issues labels according to the print conditions programmed.
Format [ESC] XS; I, aaaa, bbbcdefgh [LF] [NUL]
Term aaaa: Number of labels to be issued
0001 to 9999
bbb: Cut interval. Designates the number of pieces to be printed before the backing
paper is cut.
000 to 100 (no cut when 000)
c: Type of sensor
0: No sensor
1: Lower reflective sensor
2: Transmissive sensor (when using normal labels)
3: Transmissive sensor (when using preprinted labels)
4: Lower reflective sensor (when using a manual threshold value)
5: Upper reflective sensor (for detecting black marks on the print side of
label):
6: Lower reflective sensor (for detecting marginal punched holes on the
fanfold paper)
d: Issue mode
C: Batch mode
D or E: Strip mode for auto labeler
NOTE: To perform the strip issue for the auto labeler, the backing paper
rewind system and the control unit are required on the auto labeler
as external equipment.
e: Issue speed
2: 2 inches/sec
4: 4 inches/sec
f: With/without ribbon
0: Without ribbon
1 or 2: With ribbon
g: Designates tag rotation.
0: Printing bottom first
1: Printing top first
2: Mirror printing bottom first
3: Mirror printing top first
h: Type of status response
0: No status response
1: Status response