Printer User Manual

- 140 -

(8) Status response

When the option with status response has been selected, a status response is

made at the end of printing or if an error occurs.

In the batch issue mode and the cut issue mode, the print end status response is

made after printing on the designated number of labels.

* Do not change the parameter for status response/no status response during

printing. Otherwise the status response may not be performed properly.

Examples

[ESC] D0762, 0820, 0732 [LF] [NUL]

[ESC] T11C40 [LF] [NUL]

[ESC] C [LF] [NUL]

[ESC] PC001; 0150, 0410, 1, 1, A, 00, B [LF] [NUL]

[ESC] RC001; Sample [LF] [NUL]

[ESC] XS; I, 0004, 0011C4201 [LF] [NUL]

• Issue count: 4 pieces

• Cut interval: 1 piece

• Paper: Tag paper (Reflective

sensor used)

• Issue mode: Cut issue

• Issue speed: 4”/sec.

• Ribbon: With

• Status response: On

S a m p l e

S a m p l eS a m p l e

S a m p l e

73.2

41.0

76.2

15.0 mm

82.0 mm

Paper feed direction