Printer User Manual

- 141 -
Notes ~ Explanation of processes involved to stop the label at the home position after the
head-open state is detected:
When the gap between labels (black mark) is found after the head open state is
detected, the value to stop at the home position of each label between the head and
the sensor is set again.
• The paper is moved in the above state.
• Stop position after feeding one label
* However, an error will result when feed jam conditions are met.
Sensor
A B C
Stop position
Paper feed direction
A B C
Stop position Sensor
D
+15 mm after detection
of gap between B and C
A B C
Stop position
77 mm
92 mm
Sensor