Printer User Manual

- 148 -
6.3.17 Forward/Reverse Feed Command [ESC] U1, [ESC] U2
Function After printing or feeding the paper, feeds the paper to the position at which the paper
can be cut manually.
When issuing the next label, feeds the paper back to the first print position.
Format Forward Feed
[ESC] U1; aaaa [LF] [NUL]
Reverse Feed
[ESC] U2; aaaa [LF] [NUL]
Term aaaa: Feed length by which the paper is fed forward or backward.
0030 to 2000 (in 0.1 mm units)
Notes (1) If the Forward Feed Command has already been transmitted when the [FEED] key
is pressed on the printer, a forward feed of the specified length is performed after
one label is fed.
(2) The Forward/Reverse Feed Command is protected in memory (even if the power is
turned off).
(3) The Forward/Reverse Feed Command is ignored in the strip issue mode for the
auto labeler and the cut issue mode.
(4) The forward feed is performed at the speed designated in the Issue Command or
Feed Command.
The reverse feed is performed at 2”/sec.