Printer User Manual

- 194 -
6.4.3 Batch Reset Command [ESC] Z0
(zero)
Function Resets the printer.
Format [ESC] Z0 [LF] [NUL]
Explanation • This command is not executed until the printer enters an idle state.
• Some values in the Parameter Set Command ([ESC] Z2;1) and Fine Adjustment Value
Set Command ([ESC Z2;2]), will become effective when the printer is initialized. This
command should be sent after the Parameter Set Command ([ESC] Z2;1) or Fine
Adjustment Value Set Command ([ESC] Z2;2) is sent.