Printer User Manual

- 205 -
10. LCD MESSAGES AND LED INDICATIONS
No. LCD Messages
LED Indication
Printer Status
Restoration
by
[RESTART]
key
Acceptance
of Status
Request
Reset
POWER ON LINE ERROR
Yes/No Command
Yes/No
1
ON LINE
{{zIn the online mode – Yes
ON LINE PCL
{{zIn the online mode
(In the PCL emulation mode)
– Yes
ON LINE KBD
{{zIn the online mode
(The keyboard (KB-80) is
connected.)
– Yes
ON LINE
{zIn the online mode
(Communicating)
– Yes
2
HEAD OPEN
{zzThe head was opened in the
online mode.
– Yes
3
PAUSE ****
{zzIn a pause state Yes Yes
4
COMMS ERROR
{z{A parity error, overrun error,
or framing error has occurred
during communication by RS-
232C.
Yes Yes
5
PAPER JAM ****
{z{A paper jam occurred during
paper feed.
Yes Yes
6
CUTTER ERROR****
{z{An abnormal condition
occurred at the cutter.
Yes Yes
7
NO PAPER ****
{z{The label has run out. Yes Yes
8
HEAD OPEN ****
{z{A feed or an issue was
attempted with the head
opened. (except the [FEED]
key)
Yes Yes
9
HEAD ERROR
{z{A broken dot error has
occurred in the thermal head.
Yes Yes
10
EXCESS HEAD TEMP
{z{The thermal head
temperature has become
excessively high.
No Yes
11
RIBBON ERROR****
{z{An abnormal condition
occurred in the sensor for
determining the torque for
the ribbon motor.
The ribbon has run out.
Yes Yes
12
SAVING ### &&&&
{{zIn writable character or PC - Yes
SAVING %%%%%%%
command save mode
13
FLASH WRITE ERR.
{z{An error has occurred in
writing data into the flash
memory card.
No Yes
14
FORMAT ERROR
{z{An erase error has occurred
in formatting the flash
memory card.
No Yes