Printer User Manual

- 17 -
3.3 NETWORK INTERFACE
(1) Connection Diagram
There are two slots (slot 1 and slot 2) for the PC card on the PCMCIA board. The LAN card
should be inserted in slot 2. If it is inserted in slot 1, it will not function.
(2) Applicable LAN Card: LAN PC Card manufactured by 3COM
Model: 3CCE589ET series
(3) Protocol: TCP/IP
(4) Items for Settings: Printer IP address (Initial value: 192.168.10.20)
Subnet mask (Initial value: 0xffffff00)
Gateway IP address (Initial value: 0.0.0.0)
(5) Printer Daemon: This printer starts up as a LPR server.
(6) HTTP Server: This printer can be used for the Internet as an HTTP server to browse
a home page for following information.
TOP menu Status (Idling/Error)
Remaining length of ribbon
Head up/down state
Label sensor state
Temperature sensor state
Maintenance counter
(7) Socket communication: This printer can make socket communications using the specified
port number.
(8) Mail transmission/reception: This printer can send/receive commands, and notify the host of the
printer status by e-mail.
(9) FTP server function: This printer can be operated remotely with a FTP client.
* For details, refer to the Network Specification (TAA-1323).
PCMCIA
board
CPU
board
Printer
TCP/IP
LAN card
Slot 1
Centronics
Slot 2
(The LAN card should be inserted here.)
RS-232C
Backside of printer