Printer User Manual

- 33 -
[mm]
Model B-850
Item
Method Batch issue Cut issue
Strip issue for
auto labeler
*1
Thermal head dot density 11.8 dots/mm
Thermal head width 216.8 mm
A: Label pitch Label Min. 15.0 38.0 25.4
Tag pitch Max. 999.0 999.0 999.0
Tag Min. 15.0 25.4 –
Max. 999.0 999.0 –
B: Label length Min. 13.0 25.0
*2
23.4
Max. 997.0 993.0 997.0
C: Backing paper width Min. 100.0 100.0 100.0
Tag width Max. 242.0 235.0 242.0
D: Label width Min. 97.0 97.0 97.0
Max. 239.0 232.0 239.0
E: Label-to-label gap Min. 2.5 6.0 2.5
Max. 20.0 20.0 20.0
F: Black mark length Min. 2.0 2.0 2.0
Max. 10.0 10.0 10.0
G: Effective print width Min. 10.0 10.0 10.0
Max. 216.8 216.8 216.8
H: Label Min. 11.0 23.0 21.4
Effective print Max. 640.0 640.0 640.0
length Tag Min. 13.0 23.4 23.4
Max. 640.0 640.0 640.0
I: Slow up/down Slow up 1.0 1.0 1.0
interval Slow down 1.0 1.0 1.0
Max. effective print length for on-the-fly
issue
320.0 320.0 320.0
“1: To perform the strip issue for the auto labeler, the backing paper rewind system and the
control unit are required on the auto labeler as external equipment.
*2: When a cut issue is performed, label length B should be as follows:
Label length B ≥ 35.0 mm -
Label-to-label gap
2