Blu-ray Disc Player BDX1100KB Owner’s Manual TM
Contents English 1 Important.................................................................................................................... 3-4 Safety and important notice...............................................................................................3 Disposal of your old product and batteries....................................................................... 3-4 2 Your Product..........................................................................................................
Safety and important notice Disposal of your old product and batteries Warning: • Risk of overheating! Never install the product in a confined space. Always leave a space of at least 4 inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. • Never place the product, remote control or batteries near naked flames or other heat sources, including direct sunlight. • Only use this product indoors.
English IMPORTANT The wires in this mains lead are coloured in accordance with the following code: BLUE: NEUTRAL BROWN: LIVE As the colours of the wires in the mains lead of this unit may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire that is coloured blue must be connected to the terminal in the plug which is marked with the letter N or coloured black.
Region Regions Codes Both the Blu-ray Disc player and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. The Region Number for this Blu-ray Disc player is described on the rear panel of the Blu-ray Disc player. Region U.S.A. and Canada regions U.K., Europe regions and Japan DVD discs that can be played ALL North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia.
Product overview English Main Unit 8 NO 6 5 4 3 Control Function a SD card slot Insert an SD card b 1 Turns the power on or restores the unit to the standby mode. c B/X Playback/Pause. d x Stop play. e Display panel Show information about the current status of this unit. f IR Sensor Point the remote control at the IR sensor. g Z Open or close the disc compartment. h Disc compartment Loads a disc into the disc drive.
English Remote Control REMOTE SIGNAL EMITTER • Point remote control to the sensor on the front panel ON / STANDBY • To switch the BD player to ON or standby mode SETUP Enters or exits the system setup menu MC(Media Center) • To OPEN/CLOSE Media Center PIP AUDIO Switch the secondary audio of secondary video(PIP) to on or off SEARCH • To search a title, chapter, track or playing time HDMI To change resolution of HDMI video output to fit TV. Such as 1080P, 1080i… etc.
3 Connections English Make the following connection to use this product.
Inserting an SD Card Option 1: Connect to digital amplifier/ receiver Option 2: Connect to analogue stereo system Option 3: Connect to network An SD card provides an additional memory to software upgrade and enjoy BD-Live bonus content. You can also enjoy playing back MP3/JPEG/MPEG4 files stored in the card. Option 1: Connect to the digital amplifer/receiver Route the sound from this player to other device to enhance audio output. DIGITAL AUDIO INPUT COAXIAL 1.
4 Preparation English Always follow the instructions in this chapter in sequence. Note: - Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Prepare the remote control 1.Open the battery compartment. 2.Insert two R03 batteries with correct polarity (+/-) as indicated. 3 Close the battery compartment. Notes: - If you are not going to use the remote control for a long time, remove the batteries.
Playback Functions Basic Playback 1. Press button on the front panel or the remote control, your BD player will turn on. The unit will take around 20 seconds to warm up. 2. Turn on the TV, and then select the input setting on the TV that matches the connection method you used to connect your player. 3. Press OPEN/CLOSE Z to slide out the disc tray. 4. Place a disc on the disc tray with the label facing up, and then press OPEN/CLOSE Z to slide back and close the disc tray.
Advanced Playback English DISPLAY Press this button and the screen will display some information about disc, such as: Title number, Chapter number, Track number, Elapsed Time, Mode, Audio, Angle, and Subtitle languages. Press this button again to turn off the information display. During DVD/CD playback, you may edit the chapter and track. REPEAT Press REPEAT repeatedly to select different repeat modes. DVD:Repeat Chapter, Repeat Title, and All. VCD PBC Off/CD/JPEG/MP3:Repeat Track and All.
[Subtitle Style]: When you play the BD or DVD disc and if it has external subtitle, you will see it in OSC menu. [Bitrate]:Use / to select your desired Bitrate. [Still Off]: Close the Still feature of DVD disc. For some DVD discs, a certain video picture will be freeze as a still picture during the process of playback to let user better view the certain picture. To continue playback, select Still Off. [Ins Search]: Instant skip 30 seconds for search.
6 Customizing English This section describes the various setting option of this BD player. If the setup option is grayed out, it means the setting cannot be changed at the current state. General Setting 1. Press SETUP button on the remote control.The Setup Menu appears. ... General Setting ... System Screen Saver On Language Disc Auto Playback On Playback CEC On Security Easy Setup More... Network Load Default More...
Auto Choose 480I/576I a resolution that fits your TV. Change will be applied immediately, you have 15s to determine whether to save the setting or rollback to prior resolution. Better performance will be provided by a HDMI connection! Previous 480P/576P 720P 1080I 1080P OK Next Press / to select an option. Press OK. Select "Yes" or "No" using /.
• [Menu] English Select the menu language. • [Audio] Select the default audio language. • [Subtitle] Select the default subtitle language. [Playback] ... General Setting ... System Closed Caption On Language Angle Mark On Playback PIP Mark On Security Secondary Audio...
Language Screen Save Off Parental Control Disc Auto Playback On Enter CECpassword: Playback On Security Disc Auto Upgrade On Network Load Default More... Move cursor key to select menu option then use “OK ” key to select RETURN Return 3. Select a rating level, then press OK. ... General Setting ... System Language Playback Screen Save Off Parental Control Disc Auto Playback On Select level: Off CEC On [1] KID SAFE Security Disc Auto Upgrade [2] G On Network Load Default More...
Display Setting English 1. Press SETUP [General Setting] menu is displayed. 2. Press to select [Display Setting], then press . 3. Select an option, press to access. ... Display Setting... TV TV Screen Video Process Resolution Auto Motion Vide... Color Space YCbCr422 16:9 Normal HDMI Deep Color Off HDMI 1080P 24F On Move cursor key to select menu option then use “OK ” key to select SETUP Exit 4. Press / to select a setup option and press 5.
{Brightness} - press t/ to adjust the brightness of display, goes left means dark and right means bright. {Contrast} - press t/ to adjust the contrast of display, goes left means low contrast and right means high contrast. {Hue} - press t/ to adjust the Hue of display, goes left means low hue and right means high hue. {Saturation} - press t/ to adjust the saturation of display, goes left means low Saturation and right means high saturation. 3. Press RETURN to exit.
English {192K} – For discs recorded at sampling rate of 192 kHz. • [DRC] Select the Dynamic Range Control mode which makes it available to listen to a movie at a low volume without losing sound clarity. {Off} – Non-dynamic range compress. {On} – Dynamic range compress. {Auto} – Adjust the DRC according to input audio. The setting of Auto is effective for Dolby TrueHD. System Information 1. Press SETUP [General Setting] menu is displayed. 2.
Playable media This product can play: • BD-Video, BD-R/RE2.0 • DVD, DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R/-R DL (Dual Layer) • Video CD/SVCD • Audio CD, CD-R/CD-RW • AVCHD, AVCREC • SD card Video Signal system: PAL/NTSC Composite video output: 1Vp-p (75 ohm). HDMI Output: 480i/576i,480p/ 576p,720p,1080i,1080p,1080P/24F.
8 Troubleshooting English If you experience any of the following difficulties while using this unit, check the list below before consulting your nearest TOSHIBA dealer. Problem Tip No reaction to the remote control. Connect the product to the power outlet. Point the remote control at the product. Insert the batteries correctly. Insert new batteries in the remote control. No video output through VIDEO OUT jack. Set Resolution of HDMI to 480i/576i or 480p/576p. No video signal on the display device.
Make sure that the BD Player supports the disc. Make sure that the Blu-ray Disc player supports the region code of the DVD or BD. For DVD+RW/+R or DVD-RW/-R, make sure that the disc is finalized. Clean the disc. Cannot play back JPEG files from a disc. Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format. Cannot play MP3 files from a disc. Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.
9 Glossary English Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a highdefinition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. Blu-ray Disc (BD) Blu-ray Disc is a next generation optical video disc capable of storing five times more data than a conventional DVD.
English compression ratio. Files are recognized by their file extension ‘.jpg’ or ‘.jpeg.’ LAN (Local Area Network) A group of linked devices in a company, school or home. Indicates the boundaries of a particular network. Local storage This storage area is used as destination for storing additional contents from BD-Live enabled BD-Video. MP3 A file format with a sound data compression system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3.
License Information on the Software Used in This Product English This document is statement purpose only. Not concerned with operation of this product. The software pre-installed in this product consists of multiple, independent software components. Each software component is copyrighted by a third party. This product uses software components that are distributed as freeware under a third-party end-user license agreement or copyright notice(hereinafter referred to as a “EULA”).
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it.
English an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty;and give any other recipients of the Program a copy of this License along with the Program.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
English of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License.
English complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library.
work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.
English wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10.
English on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12.
COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1995-2009 International Business Machines Corporation and others All rights reserved.
English duce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http:// www.openssl.org/)" * * 4.
LIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * The licence and distribution terms for any publically available version or * derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.] */ zlib /* zlib.h -- interface of the 'zlib' general purpose compression library version 1.2.
English The FreeType Project LICENSE 2006-Jan-27 compliance with this license. We thus encourage you to use the following text: Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg """ Portions of this software are copyright © The FreeType Project (www.freetype. org). All rights reserved.
2.
English use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
Permission is NOT granted for the use of any IJG author's name or company name in advertising or publicity relating to this software or products derived from it. This software may be referred to only as "the Independent JPEG Group's software". To avoid entanglement with the Unisys LZW patent, GIF reading support has been removed altogether, and the GIF writer has been simplified to produce uncompressed GIFs.
Software components as distributed by the Copyright Holder(s). English Modified Version refers to any derivative made by adding to, deleting,or substituting -- in part or in whole -- any of the components of the Original Version, by changing formats or by porting the Font Software to a new environment. Author refers to any designer, engineer, programmer, technical writer or other person who contributed to the Font Software.