Owner manual

20
English
Notes:
- This resoluon becomes eecve only when
the playing Blu-ray Disc™ contents are Film
source.
- During HDMI 1080/24p playback, there will
be no composite output.
[Video Process]
TV
Video Adjust More...
Low
Video Process
Sharpness
Display Setting
SETUP
Exit
Move cursor key to select menu option
then use “OK ” key to select
• [Video Adjust]
Select a predened setting of the video.
1. Press OK.
2. Press/ to adjust the video
Brightness, Contrast, Hue and
Saturation.
{Brightness} - Press / to adjust
the brightness of display, goes left
means dark and right means bright.
{Contrast} - Press / to adjust the
contrast of display, goes left means low
contrast and right means high contrast.
{Hue} - Press / to adjust the Hue of
display, goes left means low hue and
right means high hue.
{Saturation} - Press / to adjust the
saturation of display, goes left
means low Saturation and right means
high saturation.
3. Press RETURN to exit.
Brightness
Contrast
Hue
Saturation
RETURN
ExitChange




• [Sharpness]
Select the level of sharpness: High,
Middle, Low.
{High} - Select High sharpness level.
{Middle} - Select Middle sharpness
level.
{Low} - Select Low sharpness level.
Audio Setting
1. Press SETUP, [General Setting] menu
is displayed.
2. Press  to select [Audio Setting],
then press .
3. Select an option, press  to access.
SETUP
Exit
Audio Output
Coaxial
PCM
PCM
48K
HDMI
Down_samp
AutoDolby DRC
Audio Setting
Move cursor key to select menu option
then use “OK ” key to select
4. Press / to select a setup option and
press 
5. Select the setting you wish to change
and press OK to conrm.
- Press  to return to the previous
menu.
- Press SETUP to exit the menu.
[Audio Output]
• [Coaxial]
Select the output mode of COAXIAL
jack, options include Bitstream, PCM,
Re-encode and Off.
{Bitstream} – Output digital signal
without any processing.
{PCM} – Output digital signal with
processing, only two channels export.
{Re-encode} – Auto select signal type
from COAXIAL jack according to the
Audio stream on disc.
{Off} – No output for Coaxial.
• [HDMI]
Select the output mode of HDMI
OUTPUT jack, options include Bitstream,
PCM, Re-encode and Off.
{Bitstream} – Output HDMI digital
signal without any processing.
{PCM} – Output HDMI digital signal
with processing.
{Re-encode} – Auto select signal type
from HDMI OUTPUT jack according to
the Audio stream on disc.
{Off} – No output for HDMI.
• [Down_samp]
Select the digital audio signal sampling
frequency. (Only Coaxial)
{48K} – For discs recorded at sampling
rate of 48 kHz.
{96K} – For discs recorded at sampling
rate of 96 kHz.
{192K} – For discs recorded at sampling
rate of 192 kHz.