Operation Manual

22 EN
PLAYBACK
This function shuffles the playback order of tracks / files.
1 In stop mode, press [MODE] twice.
2 Press [PLAY B] to start random playback.
To exit from the random playback mode:
•Press [MODE] in stop mode.
This function plays back approximately at 1.3 times the
normal playback while keeping the sound output. This
function is available only on discs recorded in the Dolby
Digital format.
1 During playback, press [MODE] repeatedly
until appears.
2 Press [ENTER] or [s / B] to change the setting.
3 Press [PLAY B] to return to normal playback.
Reduces the noise of the playback picture.
1 During playback, press [MODE] repeatedly
until appears.
2 Use [s / B] to change the setting.
3 Press [RETURN] to exit.
Random Playback
1. Audio CD
Track information
MP3 / WMA / JPEG
File information
2. Audio CD
“CD-DA” will be displayed
MP3 / WMA / JPEG
Current disc, SD card, or folder name will be displayed
3. Track / File list
Track / File list in the original order will be displayed
4. Operation guide
Press [Red] to go to the previous page in the track /
file list
Press [Green] to go to the next page in the track / file
list
5. Total playback time of all tracks (audio CD only)
6. Playback status
Note
During the random playback, press [STOP C] once to
set the resume point, and then press [PLAY B] to
resume random playback from where [STOP C] was
pressed (audio CD) or from beginning of the file
where [STOP C] was pressed (MP3 / WMA / JPEG).
To repeat the current track / file in the random
selection, press [REPEAT] repeatedly until
Track” appears during playback. To repeat the
entire random selection press [REPEAT] repeatedly
until “ All” appears during playback.
Playback from a desired track / file is not available
during random playback.
In stop mode, press [RETURN] to switch to the
programme playback mode.
For a disc containing mixed MP3 and Windows
Media™ Audio files, random playback of those files
will be performed.

1 : 13 : 29
CD-DA
1 0:36
1:14
0:45
0:50
0:53
0:20
0:54
2
3
4
5
6
7
- - / 16
Random
Total
Page Down
1623 4 5
e.g.) audio CD
Rapid Playback
“Off” : Plays back in normal speed.
“”
: Plays back approximately at 1.3 times of normal
playback.
Note
Picture adjustment and audio language setting
cannot be changed during this function.
Virtual surround does not work during this function.
This function may not work at some points on a disc.
During this function, 2ch LPCM will be output from
HDMI OUT jack and DIGITAL OUT jack.
Useful Function
Noise Reduction
“Off” :Shows the original picture as recorded.
“1” :Executes 3D noise reduction which detects and
deletes the noise by comparing each picture
frames.
“2” :Executes MPEG noise reduction which reduces
the block noise and mosquito noise on the
subtitles on the movie.
“3” :Executes both MPEG noise reduction and 3D
noise reduction.
Note
The setting will remain the same even if the unit is
turned to the standby mode.
You cannot adjust the setting during rapid playback.
E5RJ2ED_EN.book Page 22 Thursday, October 29, 2009 3:30 PM