Operation Manual

42 EN
OTHERS
Problem Solution
Cannot connect to the
network
- Check if the LAN cable connection is properly made.
- Turn on the modem or broadband router.
- Check the network setting.
- Check if the broadband router and/or modem is correctly connected.
- Check “BD-Live Setting”.
Cannot connect to the
network while my PC is
connected to the network
- Check the content of your Internet service contract to see if your Internet service
provider prevents multiple terminals connecting at the same time.
Cannot use the BD-Live
function
- Use an SD card with enough space.
The playback of BD-video or
download of data does not
perform properly
- Check if an SD card is correctly inserted. Do not remove the card during playback as
some BD-videos require an SD card for playback.
Note
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this
manual for details on correct operations.
• Some functions are prohibited on some discs.
Specifications
General
Signal system NTSC/PAL colour
Power requirements 220-240 V AC, 50 Hz
Power consumption 22 W (standby: 0.5 W)
Dimensions (width x height x depth) 435 x 56 x 218 mm
Weight 2.3 kg
Operating temperature 5°C to 35°C
Operating humidity Less than 80 % (no condensation)
Terminals
Rear
Video output
RCA jack x 1 1 Vp-p (75Ω)
Component video output
RCA jack x 3 Y: 1 Vp-p (75Ω) P
B/CB: 700 mVp-p (75Ω) PR/CR: 700 mVp-p (75Ω)
HDMI output
HDMI jack x 1 Video: 480p/576p, 720p, 1080i, 1080p, 1080p24 / Audio
Audio output (Analogue)
RCA jack x 2 L/R: 2 Vrms (output impedance: more than 1kΩ)
Audio output (Digital)
RCA jack x 1
Optical jack x 1
500 mVp-p (75Ω)
Digital connector
LAN terminal 10BASE-T/100BASE-TX
Note
• The specifications and design of this unit are subject to change without notice.
E5RJ2ED_EN.book Page 42 Thursday, October 29, 2009 3:30 PM