User's Manual

21EN
PLAYBACK
You can play back the specific part (between point A and
point B) repeatedly.
1 During playback, press [A-B] at the desired
starting point A.
2 During playback, press [A-B] at the desired
ending point B.
As soon as you set the point B, the part between point
A and point B will start playback repeatedly.
• To cancel the A-B repeat, press [A-B] again.
You can play back the disc/card in your desired order.
1 In stop mode, press [MODE].
2 Use [K / L] to select a track / folder / file, then
press [ENTER].
3 Press [PLAY B] to start programme playback.
• The programme playback will start.
To exit from the programme playback mode:
•Press [RETURN] in stop mode.
A-B Repeat
Note
• Point B should be set within the same title or track as
point A.
• A-B repeat is not available with some scenes.
• To cancel the A point which was set, press [CLEAR].
• A-B repeat does not function during repeat playback.
•For some DivX
®
files, A-B repeat playback may not
function.
Programme Playback
1. Audio CD
Track information
DivX
®
/ MP3 / WMA / JPEG
File information
2. Audio CD
“CD-DA” will be displayed
DivX
®
/ MP3 / WMA / JPEG
Current disc, SD card, or folder name will be displayed
3. Track / Folder / File list
Track / Folder / File list in the original order
4. Programmed list
Track / File list in the programmed order
5. Cumulative playback time of all tracks in the
programmed list (audio CD only)
0 : 26 : 24
CD-DA
0:36
1:14
0:45
0:50
0:53
0:20
0:54
8
9
10
11
12
13
14


1:14
0:50
1:14
0:50
0:53
0:54
0:36
2
4
9
11
12
14
8
- - / 16
Page Up Page Down Page Prev Page Next
Program
Total
1623 4
7
5
8
e.g.) audio CD
6. Playback status
7. Current page / Total page number
8. Operation guide
Press [Red] to go to the previous page in the track /
folder / file list
Press [Green] to go to the next page in the track /
folder / file list
Press [Yellow] to go to the previous page in the
programmed list
Press [Blue] to go to the next page in the
programmed list
•For DivX
®
, MP3, WMA or JPEG files, use [K / L] to
select a folder, then press [ENTER] first, and then use
[K / L] to select a file, then press [ENTER].
•Press [CLEAR] to erase the last file of the
programme.
•Use [K / L] to select “All Clear” at the bottom of the
list to erase all the tracks / files in the programme.
•Use [s / B] to go back / forward between the
hierarchy of folders.
Note
• During programme playback, press [STOP C] once
to set the resume point, and then press [PLAY B] to
resume programme playback from where [STOP C]
was pressed (audio CD) or from beginning of the file
where [STOP C] was pressed (MP3 / WMA / JPEG).
• During programme playback, press [STOP C] twice
to display the programme screen. To go back to the
normal programme playback, press [RETURN] to exit
from the programme screen, then press [PLAY B].
• Up to 99 tracks / files can be entered.
• To repeat the current track / file in the programme,
press [REPEAT] repeatedly until “ Track”
appears during playback. To repeat the entire
programme, press [REPEAT] repeatedly until
“ All” appears during playback.
• Playback from a desired track / file and random
playback are not available during programme
playback.
• Press [MODE] to switch to the random playback mode.
• The programme will be cleared when;
- the unit is turned into the standby mode.
- the media is switched.
- the disc / card is removed (as for “Disc” mode, just
opening the disc tray will clear the programme
info).
Before
you
begin
INTRODUCTION CONNECTIONS PLAYBACK FUNCTION SETUP OTHERS
E5RJ0BD_EN.book Page 21 Tuesday, October 20, 2009 3:53 PM