User's Manual

14
English
6 Customizing
This section describes the various setting
option of this player.
If the setup option is grayed out, it means
the setting cannot be changed at the
current state.
General Setting
1. Press SETUP button on the remote
control.The Home Menu appears.
System
Screen Saver On
On
On
On
More...
Use cursor key to move focus,use
“OK” key ro select
Language
Disc Auto Playback
Playback
CEC
Security
Disc Auto Upgrade
Network
Load Default
... General Setting ...
SETUP
Exit
2. Press  to select an option, then press
 to access.
3. Press / to select a setup option and
press 
4. Select the setting you wish to change
and press OK to conrm.
- Press  to return to the previous menu.
[System]
To change the following system option to
personalize your BD player.
• [Screen Saver]
Turn On or Off the screen saver mode.
It helps to protect the TV screen.
{ On } – Set the screen saver active
after approximately 10 minutes with no
operation.
- The BD player will switch to standby
mode if there is no operation after the
screen saver is engaged for
approximately 10 minutes.
{ Off } – Turn off the screen saver
mode .
• [Disc Auto Playback]
Turn On or Off the disc automatic
playback switching mode.
{On} – The disc playback automatically
after loading.
{Off} – Turn off disc auto playback
mode.
• [CEC]
This player supports REGZA-LINK which
uses the HDMI CEC (Consumer
Electronics Control) protocol. You can
use one single remote control to control
all REGZA-LINK-compliant devices that
are connected through HDMI connectors.
{On} - Turns on REGZA-LINK features.
-With CEC on, during TV standby with
the BD player on, pressing SETUP, Play/
Pause will power on the TV.
{Off} - Disables REGZA-LINK features.
• [Disc Auto Upgrade]
Turn On or Off the disc automatic
upgrade switching mode.
{On} - Start upgrading from the insert
disc.
{Off} - Disable disc auto upgrade mode.
• [Load Default]
Reset all settings of BD player to initial
default state.
- Follow the instruction on the TV screen
to conrm the default setting operation.
1. Select Load Default.
2. A dialogue box pops up shown as
below. Select OK.
Load Default
OK Cancel
Do you want to load default?
3.It may take awhile when loading
default is in progress. Please wait...
Load Default
30%
Loading default, please wait...
4. TV will display as follow:
Welcome
OK Next
to use BD Player Setting wizard!
Some simple settings are needed before you
enjoy it. Please make detail settings of home
menu later.
5. Press OK, enter language setting.
Press/ to select a language option.
Choose
Previous
an OSD language before starting.
The language selected will be applied not only
here but also in other OSD windows, menus etc.
English
OK Next