User's Manual

18
English
Display Setting
1. Press SETUP
[General Setting] menu is displayed.
2. Press  to select [Display Setting],
then press
 .
3. Select an option, press  to access.
TV
TV Screen 16:9 Full
Auto
PAL
RGB
Off
Use cursor key to move focus,use
“OK” key ro select
Video Process
Motion Video...
Resolution
TV System
Color Space
HDMI Deep color
... Display Setting...
SETUP Exit
4. Press / to select a setup option and
press 
5. Select the setting you wish to change
and press OK to conrm.
- Press  to return to the previous
menu.
- Press SETUP to exit the menu.
[TV]
• [TV Screen]
Select the screen format according to
how you want the picture to appear on
the TV.
{16:9 Full} – for a disc with the aspect
ratio of 4:3, the output video is
stretched into 16:9 full screen.
{16:9 Normal} – for a disc with the
aspect ratio of 4:3, the output video is
resized vertically to match what will be
seen on the display.
{4:3 Pan&Scan} – for standard TV,
Display a wide picture on the entire
screen and cuts off the redundant
portions.
{4:3 Letterbox} – for standard TV,
Display a wide picture with two black
borders on the top and bottom of 4:3
screen.
• [Resolution]
Select a video output resolution that is
compatible with your TV display
capability.
{Auto} – Select the most suitable
resolution according to the TV .
{480I/576I}, {480P/576P},
{720P}, {1080I}, {1080P}
– Select a video resolution setting that
is best supported by the TV, See TV
manual for details.
• [TV System]
If the video does not appear correctly,
change the setting.By default, this
setting matches the most common
setting for TVs in your country.
{NTSC} – for NTSC-system TV.
{PAL} – for PAL-system TV.
{Multi} – for Multi-system.
TV,compatible with both PAL and NTSC.
• [Color Space]
Select a predened Color space of
picture.
{RGB} – select RGB Color space.
{YCbCr} – select YCbCr Color space.
{YCbCr422} – Select YCbCr422 Color
space.
{Full RGB} – select Full RGB Color
space.
• [HDMI Deep Color]
This feature is available only when the
display device is connected by a HDMI
cable, and when it supports deep Color
feature.
{Off} – Output standard 24 bit Color.
{30 bits} – Output 30 bits Color.
{36 bits} – Output 36 bits Color.
• [HDMI 1080p 24F]
{On} – Enable 1080p 24F video
resolution setting.
{Off} – Disable 1080p 24F video
resolution setting.
About HDMI 1080p 24F Notes:
If you want the 24Hz output, it should fulll below 3
conditions:
1.TV supports the 24Hz display:
2.Player choose the 24Hz option in the setup menu;
3.Media must be the 24Hz video.
Notes
- This resoluon becomes eecve only
when the playing BD-Disc contents are Film
source.
- During HDMI 1080p 24F playback, there
will be no composite output.
[Video Process]
TV
Video Adjust More...
Low
Use cursor key to move focus,use
“OK ” key ro select
Video Process
Motion Video...
Sharpness
... Display Setting...
SETUP Exit
• [Video Adjust]
Select a predened setting of the video.
1. Press OK .
2. Press/ to adjust the video
Brightness, Contrast, Hue and Saturaon.
{Brightness}- press / to adjust
the brightness of display, goes left
means dark and right means bright