User's Manual

19
English
{Contrast}- press / to adjust
the contrast of display, goes left
means low contrast and right means
high contrast.
{Hue}- press / to adjust the Hue
of display, goes left means low hue
and right means high hue.
{Saturation}- press / to adjust
the saturation of display, goes left
means low Saturation and right means
high saturation.
3. Press RETURN to exit.
Brightness
Contrast
Hue
Saturation
Return ExitChange
• [Sharpness]
Select the level of sharpness: High,
Middle, Low
{High}- Select High sharpness level
{Middle}- Select Middle sharpness level
{Low} - Select Low sharpness level
[Motion Video Process]
TV
Video Mode Standard
Noise Reduction 0
Use cursor key to move focus,use
“OK” key ro select
Video Process
Motion Video...
Color Adjust
... Display Setting...
SETUP Exit
• [Video Mode]
Select the output mode of video,options
include: Standard, Vivid, Cinema, Custom,
these can change the output display.
{Standard} output video signal without
any processing and in standard mode.
{Vivid} output video signal in vibrant
color mode.
{Cinema} output video signal in cinema
mode.
{Custom} you can dene your own video
mode by adjusting the video Brightness,
Saturation, Hue, Contrast, Sharpness and
CTI.
• [Color Adjust]
you can dene your own Color
adjustment when you select the Custom
video mode and you can adjust the Color
of red, green, blue, yellow, cyan and
magenta.
{Red} Dene your own red Color by
adjusting the brightness, saturation and hue.
{Green} Dene your own green Color by
adjusting the brightness, saturation and hue.
{Blue} Dene your own blue Color by
adjusting the brightness, saturation and hue.
{Yellow} Dene your own yellow Color
by adjusting the brightness, saturation
and hue.
{Cyan} Dene your own cyan Color by
adjusting the brightness, saturation and hue.
{Magenta} Dene your own magenta Color
by adjusting the brightness,saturation and hue.
• [Noise Reduction]
Reduces the noise of the playback picture.
{0} – Shows the original picture as
recorded.
{1} – Executes 3D noise reduction which
detects and deletes the noise by
comparing each picture frames.
{2} – Executes MPEG noise reduction
which reduces the block noise and
mosquito noise on the subtitles on the
movie.
{3} – Executes both MPEG noise
reduction and 3D noise reduction.
Audio Setting
1. Press SETUP
[General Setting] menu is displayed.
2. Press  to select [Audio Setting],
then press  .
3. Select an option, press  to access.
SETUP Exit
Audio Output
Spdif
PCM
PCM
48K
Use cursor key to move focus,use
“OK” key ro select
HDMI
Down_samp
OffDRC
... Audio Setting...
4. Press / to select a setup option and
press 
5. Select the setting you wish to change
and press OK to conrm.
- Press  to return to the previous
menu.
- Press SETUP to exit the menu.
[Audio Output]
• [Spdif]
Select the output mode of COAXIAL
jack, options include Bitstream, PCM,
Reencode and Off.
{Bitstream} – Output digital signal
without any processing.
{PCM} – Output digital signal with
processing, only two channels export.
{Reencode} – Auto select signal type
from COAXIAL jack according to the
Audio stream on disc.
{Off} – No output for S/PDIF.