User's Manual

20
English
• [HDMI]
Select the output mode of HDMI Out
jack, options include Bitstream, PCM,
Reencode and Off.
{Bitstream} – Output HDMI digital
signal without any processing.
{PCM} – Output HDMI digital signal
with processing, only two channels
export.
{Reencode} – Auto select signal type
from "COAXIAL jack" or "HDMI Out
jack" according to the Audio stream on
disc.
{Off} – No output for HDMI.
• [Down_samp]
Select the digital audio signal sampling
frequency.
{48K} – For discs recorded at sampling
rate of 48 kHz.
{96K} – For discs recorded at sampling
rate of 96 kHz.
{192K} – For discs recorded at sampling
rate of 192 kHz.
• [DRC]
Select the Dynamic Range Control mode
which makes it available to listen to a
movie at a low volume without losing
sound clarity.
{Off} – Non-dynamic range compress.
{On} – Dynamic range compress.
{Auto} – Adjust the DRC according to
input audio.
The setting of AUTO is effective for Dolby
TrueHD.
System Information
1. Press SETUP
[General Setting] menu is displayed.
2. Press  to select [System
Information],
- The current software version and MAC
address display
- Press  to return to the previous
menu.
- Press SETUP to exit the menu.
SETUP
Exit
Use cursor key to move focus,use
“OK” key ro select
Software version: BDP V3.0
MAC: 00-1C-50-17-1A-DD
... System Information ...