User's Manual

10
English
Always follow the instructions in this chapter in
sequence.
Find the correct viewing input
1. Press
to turn on this product.
2. Turn on the TV and switch to the correct video-in
input (refer to the TV user manual on how to
select the correct input).
Initial Setting
When you turn on this unit for the fi rst time, or
restore all settings to factory defaults, the system
will prompt you to perform Easy Setup.
1. Follow the on-screen instructions to customize
the following settings to your preference:
OSD Language
Resolution
Aspect ratio
Portal Auto Start
2. After setting, press OK to confi rm and exit.
Use the SETTING menu
1. Press to display the setup screen in stop
mode or no disc playback.
• The maximum operable ranges from the
unit are as follows.
Note:
- Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radia
on exposure or other unsafe opera on.
Notes:
1. Open the battery cover down.
2. Insert two AAA batteries with correct polarity (+
/ -) as indicated.
3. Close the battery cover.
- If you are not going to use the remote control for a long
me, remove the baeries.
- Do not use old and new or different types of baeries
in combinaon.
- Risk of explosion! Keep baery away from heat, sunshine
or fire. Never discard baery in fire.
- Line of sight: approx. 10 m (original state)
- Either side of the centre: approx. 7 m within 30°
(original state)
- Above: approx. 7 m within 30° (original state)
- Below: approx. 7 m within 30° (original state)
7m 10m 7m
(Sample Illustraon) Remote control - Opening
the baery cover
Prepare the remote control
Setting up the player
4 Preparation