Operation Manual

20
English
Display Setting
1. Press SETUP
[General Setting] menu is displayed.
2. Press  to select [Display Setting],
then press
 .
3. Select an option, press  to access.
TV Screen 16:9 Full
Auto
YCbCr422
Off
Video Process
Motion Video...
Resolution
Color Space
HDMI Deep color
OnHDMI 1080P 24F
... Display Setting...
SETUP Exit
TV
Move cursor key to select menu option
then use “OK” key to select
4. Press / to select a setup option and
press 
5. Select the setting you wish to change
and press OK to conrm.
- Press  to return to the previous
menu.
- Press SETUP to exit the menu.
[TV]
• [TV Screen]
Select the screen format according to
how you want the picture to appear on
the TV.
{16:9 Full} – for a disc with the aspect
ratio of 4:3, the output video is
stretched into 16:9 full screen.
{16:9 Normal} – for a disc with the
aspect ratio of 4:3, the output video is
resized vertically to match what will be
seen on the display.
{4:3 Pan&Scan} – for standard TV,
Display a wide picture on the entire
screen and cuts off the redundant
portions.
{4:3 Letterbox} – for standard TV,
Display a wide picture with two black
borders on the top and bottom of 4:3
screen.
• [Resolution]
Select a video output resolution that is
compatible with your TV display
capability.
{Auto} – Select the most suitable
resolution according to the TV .
{480I/576I}, {480P/576P},
{720P}, {1080I}, {1080P}
– Select a video resolution setting that
is best supported by the TV. See TV
manual for details.
• [Color Space]
Select a predened Color space of
picture.
{RGB} – select RGB Color space.
{YCbCr} – select YCbCr Color space.
{YCbCr422} – Select YCbCr422 Color
space.
{Full RGB} – select Full RGB Color
space.
• [HDMI Deep Color]
This feature is available only when the
display device is connected by a HDMI
cable, and when it supports deep Color
feature.
{30 bits} – Output 30 bits Color.
{36 bits} – Output 36 bits Color.
{Off} – Output standard 24 bit Color.
• [HDMI 1080p 24F]
{On} – Enable 1080p 24F video
resolution setting.
{Off} – Disable 1080p 24F video
resolution setting.
About HDMI 1080p 24F Notes:
If you want the 24Hz output, it should fulll below 3
conditions:
1.TV supports the 24Hz display:
2.Player choose the 24Hz option in the setup menu;
3.Media must be the 24Hz video.
Notes
- This resoluon becomes eecve only
when the playing BD-Disc contents are Film
source.
- During HDMI 1080p 24F playback, there
will be no composite output.
• [HDMI 3D]
Turn on or off the 3D function.
{Auto} – Opening the 3D function of
player.
{Off} – Turn off the 3D function.
When you play a side by side 3D disc,
which is a kind of 3D disc and it is make
up of two frames, the player will
playback this disc and export the
content based on the TV's settings. So if
you want to do some settings, such as
OSC or program, please ensure that the
3D TV's setting is correct.
Note: If you do some 3D TV's seng during
3D disc playback, the TV screen may be
abnormal. To recover, load the 3D TV's
default seng rst.
[Video Process]
TV
Video Adjust More...
Low
Video Process
Motion Vide...
Sharpness
... Display Setting...
SETUP Exit
Move cursor key to select menu option
then use “OK” key to select