User guide

20
English
Display Setting
1. Press SETUP
[General Setting] menu is displayed.
2. Press  to select [Display Setting],
then press  .
3. Select an option, press  to access.
TV Screen 16:9 Full
Auto
YCbCr422
Off
Video Process
Motion Vide...
Resolution
Color Space
HDMI Deep color
OnHDMI 1080/24p
Display Setting
SETUP Exit
TV
Move cursor key to select menu option
then use “OK” key to select
4. Press / to select a setup option and
press .
5. Select the setting you wish to change
and press OK to conrm.
- Press  to return to the previous
menu.
- Press SETUP to exit the menu.
[TV]
• [TV Screen]
Select the screen format according to
how you want the picture to appear on
the TV.
{16:9 Full} – for a disc with the aspect
ratio of 4:3, the output video is
stretched into 16:9 full screen.
{16:9 Normal} – for a disc with the
aspect ratio of 4:3, the output video is
resized vertically to match what will be
seen on the display.
{4:3 Pan&Scan} – for standard TV,
Display a wide picture on the entire
screen and cuts off the redundant
portions.
{4:3 Letterbox} – for standard TV,
Display a wide picture with two black
borders on the top and bottom of 4:3
screen.
• [Resolution]
Select a video output resolution that is
compatible with your TV display
capability.
{Auto} – Select the most suitable
resolution according to the TV .
{480i/576i}, {480p/576p}, {720p},
{1080i}, {1080p}
– Select a video resolution setting that
is best supported by the TV. See TV
manual for details.
Note:
-When resoluon is set to 720p/1080i/1080p:
(1) If only CVBS connected, the resoluon of CVBS
video output will be set to 480i/576i
automacally.
(2) If HDMI and CVBS are both connected, there
will be no CVBS video output, instead, a message
will be shown as follows:
Out Of Range:Check Display Resoluon
• [Color Space]
Select a predened Colour space of
picture.
{RGB} – select RGB Colour space.
{YCbCr} – select YCbCr Colour space.
{YCbCr422} – Select YCbCr422 Colour
space.
{Full RGB} – select Full RGB Colour
space.
• [HDMI Deep Color]
This feature is available only when the
display device is connected by a HDMI
cable, and when it supports deep Colour
feature.
{30 bits} – Output 30 bits Colour.
{36 bits} – Output 36 bits Colour.
{Off} – Output standard 24 bit Colour.
Note:
-When the Colour space is "YCbCr422", even if
HDMI Deep Colour is set to 30bits/36bits, it is not
output with Deep Colour.
• [HDMI 1080/24p]
{On} – Enable 1080/24p video
resolution setting.
{Off} – Disable 1080/24p video
resolution setting.
Notes about HDMI 1080/24p:
If you want the 24Hz output, it should fulll below
3 condions:
1.TV supports the 24Hz display;
2.Player choose the 24Hz opon in the setup
menu;
3.Media must be the 24Hz video.
Notes
- This resoluon becomes eecve only when the
playing Blu-ray Disc
TM
contents are Film source.
- During HDMI 1080/24p playback, there will be
no composite output.
• [HDMI 3D]
Turn on or off the 3D function.
{Auto} – Opening the 3D function of
player.
{Off} – Turn off the 3D function.
When you play a side by side 3D disc,
which is a kind of 3D disc and it is make
up of two frames, the player will playback
this disc and export the content based on
the TV's settings. So if you want to do
some settings, such as OSC or program,
please ensure that the 3D TV's setting is
correct.
Note: If you do some 3D TV's seng during 3D
disc playback, the TV screen may be
abnormal. To recover, load the 3D TV's default
seng rst.
[Video Process]
TV
Video Adjust More...
Low
Video Process
Motion Vide...
Sharpness
Display Setting
SETUP Exit
Move cursor key to select menu option
then use “OK” key to select