Manual

16 SyrnbioTM MediaBoxandBin-rayDiscTM Playerconnections
SymbioTMMediaBoxandBin-rayDiscTMPlayerconnections
It is important to connect the player to the Internet and AV devices first, before connecting the player to AC
power.
Connecting to a TV
Connect a HDMI TM cable from the HDMITM output jack on this player to the HDMITM input jack on the TV.
An HDMITM cable carries both video and audio signals. If you wish to use TV speakers, you do not need to
make an additional audio connection.
e
HDMITM cable
TM
(SampleIllustration) Connectingto a TV- HDMI cable
NOT E Do nottilt the connectorwheninserting it into the HDMITM jack, and makesure theshapesof
the jack and theconnector correspond.
To enjoy viewing 3D content, an HDMITM connection with a High Speed HDMITM cable is
required.(HDMITM cable sold separately).
Connecting to the digital AV receiver/amplifier
Route the sound from this player to the AV receiver/amplifier/sound system to enhance audio output.
Connect a coaxial cable from the COAXIAL jack on this player to the COAXIAL jack on the device.
_ _ DigitalAV receiver/
._" _ amplifier
Digitalaudio coaxialcable
(notsupplied)
(SampleIllustration) Connectingto a digitalAV receiver/amplifier