Manual

26 Customizing
Customizing
This section describes the various setting options of this Symbio TM Media Box and Btu-ray Disc TM Player.
If the setup option is greyed out, it means the setting cannot be changed at the current state.
1 Press the SETTING button in stop mode to display the setup screen.
2 Press OK to enter the Setting menu.
3 Use the ,A/',_ button to select an option and press OK.
4 Press the 4 button or the RETURN button to return to the previous menu.
(Sample Illustration) General operations settings
NOT E You can also access your settings via the Settings icon on the ePortal.
Audio Setting
1 In the Setting menu, use the _./T button to select Audio and press OK.
2 Press the _-/'_" button to select an option and press OK.
3 Use the ,_/v button to select the desired audio setting and press OK.
4 Press the _ button or the RETURN button to return to the previous menu.
SPDiF
When you connect an audio system to the COAXIAL DIGITAL output jack, the options are:
@' Bitstream: Selects Bitstream output if your receiver SPDIF (Coaxial) IN supports Dolby _ or DTS ® or
PCM audio signal.
@' PCM: Selects PCM output if your receiver SPDIF (Coaxial) IN only supports PCM stereo audio
signal.
_'_" Re-encode: Selects Re-encode output if your receiver SPDIF (Coaxial) IN supports Dolby _ or DTS {P_
and you want to hear both PIP audio and the movie audio on Blu-ray TM video.
@" Off: No audio will be output via COAXIAL DIGITAL output jack.
NDMI
When you connect an HDMI TM device to the HDMI OUT jack, the available options are:
_*% Bitstream: Selects Bitstream output if your receiver HDMI IN supports Dolb_i _ or DTS _ or PCM audio
signal.
_.* PCM: Selects PCM output if your receiver HDMI IN only supports PCM audio signal.
@' Re-encode: Selects Re-encode if your receiver's HDMI IN supports Dolby <*_or DTS cP_and you want to
hear both PIP audio and movie audio on Blu-ray TM video.
*_* Off: No audio will be output via HDMI OUT jack.