46BL712G DIGITAL Series OWNER’S MANUAL
Contents Noise Reduction ............................................... 18 Advanced Settings ............................................ 18 Colour Temp ..................................................... 18 Picture Zoom .................................................... 19 Colour Shift ....................................................... 19 Resetting........................................................... 19 PC Picture Settings........................................... 19 Volume ...............
Safety Precautions English This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.
Installation and Important Information Where to install English Sturdy tie (as short as possible) * Set controls and stand style is dependant on model. Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV on a stable, level surface that can support the weight of the TV.
Important safety information English DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. Headphone Warning Loud music can damage your hearing irreversibly. Do not set the volume to a high level when listening through headphones, particularly for extended listening periods. Information for the DVB-T function • Any function relative to the digital television (with the DVB logo) is available only within the country or area where such signals are transmitted.
Important safety information (continued) • This set should only be connected to an 220-240V AC 50Hz mains power supply. Do not attempt to connect it to any other type of supply. • Liquids spilled into the unit can cause serious damage. Switch the set off and disconnect the mains power supply, then consult a qualified service person before attempting to use the unit again.
To display your LCD TV using a wall bracket English When using a Wall Bracket Please use a wall bracket appropriate for the size and weight of the LCD TV. • • Two people are required for installation. • • To install a wall-mount from another manufacturer. (1) Unplug and remove any cables and/or other component connectors from the rear of the TV. (2) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket.
The Remote Control Simple at-a-glance reference of your remote control. To switch your TV to standby mode. Subtitle On/Off Mono-Stereo / Dual I-II To enable the displaying of subtitles. Stereo/Bilingual Transmissions Image size Expand (in TXT mode) Red button SCREEN LANG SUBTTL No function Blue button Green button 1 2 3 4 5 6 7 8 9 0 Teletext / Mix To call up text services in analogue broadcasts and interactive services in digital mode.
Connecting External Equipment Before connecting any external equipment, remove the mains plug from the wall socket. English Side View COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM). USB Input HDMI Input Sockets Side HDMI Input SCART Sockets Headphone VGA Input ANT. (Aerial) Input USB Input SIDE AV YPbPr Video Inputs Audio Inputs Subwoofer SPDIF Coaxial Out Out * a decoder could be Digital Satellite, Free to Air or any other compatible decoder.
Connecting an HDMI® or DVI Device to the HDMI Input English These inputs are designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output). NOTE: • Some early HDMI equipment may not work properly with your latest HDMI TV.
Connecting a Computer Connecting a USB Memory English To Connect a Computer To Connect a USB Flash Drive With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the television’s speakers. • You can connect a USB Flash Drive to your TV by using the USB input of the TV. This feature allows you to display/play music, photo or video files stored in a USB stick.
Power Save Mode English Environmental Information • This television is designed to consume less energy. • You not only help to the environment but also you can reduce electricity consumption electricity thanks to the energy efficiency feature of this TV. To reduce energy consumption, you should take the following steps: • You can use Power Save Mode setting, located in the Settings menu.
Controlling the TV English A wide variety of external equipment can be connected via the sockets located on the side and back of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the touch controls on the left side of the television may be used for some functions.
Initial Installation English Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial or cable is connected to your television. To set up the television use the buttons on the remote control as detailed on page 7. IMPORTANT: Ensure that the aerial or cable is connected and a Common Interface module is not inserted before switching on the TV for the first time installation. 1.
Initial Installation - continued English 10. The Auto tuning screen will appear and the television will start to search for available stations. The progress bar will move along the line. You must allow the television to complete the search. Tthe following OSD will be displayed on the screen and the television will search for digital and if available any analogue TV broadcasts: Note: You can press MENU button to cancel.
Basic Operations English Stereo and Bilingual Transmissions Standby Notifications If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time positions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear. If the TV switches off while in No Signal mode, the following on-screen message will be displayed on the next switch-on: Stereo… Press LANG to select Stereo or Mono.
General Operation English Viewing Channel List Viewing Info Banner The channel order may be changed to suit your personal preference. • Press INFO button the information screen will appear giving details of the channel and programme currently being viewed. • Select Channel List from the main menu and press OK. The following menu will be displayed: • Select Edit Channel List to manage all stored channels. Use Up or Down and OK buttons to select Edit Channel List.
Electronic Programme Guide (EPG), Input Selection English Electronic Programme Guide • Select the on-screen guide by pressing EPG, the guide screen will appear highlighting details of the channel and programme currently being viewed. This may take a few moments to appear. Input Selection Use the Input Selection window if the television does not switch over to a connected source automatically. • For information on a highlighted programme, press INFO button.
Features in Brief English Language Settings Menu Brightness Press MENU button and select settings by using Left or Right button. Press OK to continue. Use Up or Down to select language settings and then press OK to continue. Using this menu you can adjust the preferred language settings. Press MENU button and select picture by using Left or Right button. Press Up or Down to select brightness. Sets the brightness value for the screen.
Features in Brief, continued English Note: • Setting Cool option gives white colours a slight blue stress. • Setting Warm option gives white colours a slight red stress. • For normal colours, select Normal option. Picture Zoom Press MENU button and select picture by using Left or Right button. Press Up or Down to select picture zoom. Sets the picture size to auto,16:9, subtitle,14:9, 14:9 zoom, 4:3 or cinema. Colour Shift Press MENU button and select picture by using Left or Right button.
Features in Brief, continued English Using this menu you can adjust the preferred language settings. Sets timers for selected programmes. will not be located while in automatic search or manual search. Scan Encrypted Channel feature will always be ON after performing first time installation. Date/Time Settings Blue Background Press MENU button and select settings by using Left or Right button. Press OK to continue. Use Up or Down to select Date/Time and then press OK to continue.
Features in Brief, continued USB Media Browser Select Auto TV Off using Up or Down buttons. You can set the timeout value of auto off feature. After the timeout value is reached and the TV is not operated for selected time , the TV will go off. Broadcast Type Press MENU button and select settings by using Left or Right button. Press OK to continue. Use Up or Down to select others settings and then press OK. Select Broadcast Type using Up or Down buttons and use Left or Right to set.
USB Media Browser, continued This TV allows you to enjoy photo, video or music files stored on a USB device. English If the USB stick is not recognised after power off/on or first time installation,first unplug the USB device and power off/on the TV set, then plug the USB device in again. • Do not use a USB Hub. • You must obtain any required permission from copyright owners to use copyright content. To s h i b a c a n n o t a n d d o e s n o t g r a n t s u c h permission.
USB Media Browser, continued • Use or button to rotate the picture. (Then, it becomes to be pause mode.) • Press INFO button to activate the operations bar. • Press BACK to go back. Video Playback When you select Videos from Media Browser, available video files will be filtered and listed on this screen. You can use Up or Down button to select a video file and press OK button to play a video. English This TV allows you to enjoy photo, video or music files stored on a USB device.
Changing Picture Format English Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Press SCREEN button and select Picture Zoom. Press OK repeatedly to select between Auto, 16:9, Subtitle, 14:9, 14:9 Zoom, 4:3 or Cinema. When Auto is selected the format being displayed is determined by the picture being broadcast. “Note: Using the special functions to change the size of the displayed image (i.e.
Appendix A: PC Input Typical Display Modes Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) English Source Supported Signals PAL 50/60 EXT (SCART SOCKETS) NTSC 60 RGB 50 RGB 60 SIDE AV YPbPr HDMI1 HDMI2 HDMI3 HDMI4 PAL 50/60 NTSC 60 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50Hz 720p 60Hz 1080i 50Hz 1080i 60Hz 1080p 50Hz 1080p 60Hz 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50Hz 720p 60Hz 1080i 50Hz 1080i 60Hz 1080p 50Hz 1080p 60Hz 1080p 24Hz Note: In some cases a signal on the
Appendix C: Supported File Formats for USB Mode Movie Remarks Video Audio (Maximum resolution/Bit rate etc.) MPEG1 MPEG Layer 1/2/3 20Mbit/sec MPEG2 MPEG2 .mpg/ .dat/ MPEG2-TS .vob/ mkv/ H.264-TS .avi Music Format File Extension MPEG4 MS ISO MPEG4 MJPEG .mp3 - EAC3/ AC3 20Mbit/sec PCM/MP3 PCM/MP3 Support SP and ASP PCM MPEG 1/2 30fps@VGA Sample Rate: 8k ~ 48kHz, Layer 1/ 2/ Bit Rate: 128kbps~320kbps 3 (MP3) Photo .
Specifications and Accessories English Broadcast Systems/Channels DVB-T: MPEG2, DVB-T: MPEG4 HD DVB-C: MPEG2, DVB-C: MPEG4 RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND Video Input PAL, SECAM, NTSC 4.
License Information • DVB is a registered trademark of the DVB Project. • [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the television.
Questions and Answers Questions English Q A Q A Q A Q A Q A Q Why is there no sound or picture? Check the TV is not in standby mode. Check the mains plug and all mains connections. Why is there a picture but no sound? Check the volume has not been turned down or that sound mute has not been selected. What can cause a poor picture? Interference or a weak signal. Try a different TV station.
Questions Q A Why doesn't the Media Browser feature operate? Make sure that USB memory is connected correctly. Incorrect behaviour may occur with a USB Hub connection. Why is the digital channel locked? Parental control is activated. Check parental settings.
If you wish to view the advanced functions but do not have access to a computer or the internet then please contact your nearest owner's manual Helpline number from the numbers shown below.
